1. 이상view 및 소개
The Dyness 40A MPPT Solar Charge Controller is designed to efficiently manage power flow from your solar panels to your battery system. It features advanced Maximum Power Point Tracking (MPPT) technology to maximize energy harvest and comprehensive protection features for system safety.
Advanced Tracking Technology
This controller utilizes advanced MPPT technology, boasting a high tracking efficiency of up to 99% and a peak conversion efficiency of 98%. It continuously tracks the solar array's maximum power point to ensure the maximum amount of power is delivered to charge the battery, even in variable light conditions such as cloudy environments.
Powerful All-Around Protection
The Dyness MPPT Controller integrates a full suite of battery protection features, including: Over-charge/discharge, PV over-voltage, short-circuit, and overheating protections. These safeguards ensure worry-free and secure charging. Internal cushioning material is incorporated to minimize damage to the controller from vibrations, making it suitable for mobile applications like caravans.
12V/24V Auto-Recognition
The controller automatically recognizes 12V/24V DC voltage systems. For Lithium batteries, manual parameterization is required. It supports various battery types, including AGM, GEL, Flooded, and Lithium batteries.
2. 설정 및 설치
Proper installation is crucial for the safe and efficient operation of your solar charge controller. Always ensure all power sources are disconnected before beginning installation.
구성 요소 식별
배선도
Follow the wiring sequence carefully to prevent damage to the controller or battery. Connect the battery first, then the solar panels, and finally any DC loads.
3. 사용 설명서
The Dyness MPPT Solar Charge Controller offers both an intuitive LCD screen interface and a smart mobile application for monitoring and control.
LCD Screen & LED Indicators
The controller features an LCD screen that displays real-time system operation information. Four buttons allow navigation through menus and parameter adjustments. Multiple LED indicators provide quick visual feedback on the status of the solar panel array, battery, loads, and controller.
Smart APP for Real-Time Monitoring
Connect your mobile phone via the built-in Bluetooth 5.0 module or through the RJ12 port (RS485 cable included). The "ChargePro" APP enables remote monitoring of solar panels, batteries, and loads in real-time, along with easy parameter adjustments.
4. 유지관리
To ensure the longevity and optimal performance of your Dyness MPPT Solar Charge Controller, regular maintenance is recommended:
- 연결 검사: 정기적으로 모든 배선 연결부를 점검하여 단단히 고정되어 있고 부식이 없는지 확인하십시오. 연결이 느슨하면 전력 손실이나 과열이 발생할 수 있습니다.
- 깨끗한 장치: Keep the controller's exterior clean and free from dust and debris. Ensure ventilation openings are not obstructed to allow for proper heat dissipation.
- 환경 점검: 설치 환경이 권장 온도 및 습도 범위 내에 유지되는지 확인하십시오.
- 소프트웨어 업데이트: Check the "ChargePro" app or Dyness website for any available firmware updates for your controller to ensure you have the latest features and bug fixes.
5. 문제 해결
If you encounter issues with your Dyness MPPT Solar Charge Controller, consider the following basic troubleshooting steps:
- 디스플레이/전원 없음: 배터리 연결 상태를 확인하고 배터리 용량이 충분한지 확인하십시오.tage is within the controller's operating range. Verify all fuses and circuit breakers are intact.
- 충전 안함: Confirm solar panel connections are secure and panels are receiving adequate sunlight. Check for any shading on the panels. Ensure the battery type is correctly configured in the controller settings or via the app.
- 과열: Ensure the controller has sufficient ventilation and is not installed in an enclosed space without airflow. Reduce load if necessary.
- 오류 코드: Refer to the "ChargePro" app or the controller's manual for specific error codes displayed on the LCD screen and their corresponding solutions.
- 부정확한 판독: Ensure all sensors (e.g., temperature sensor) are correctly connected and functioning.
6. 사양
Detailed technical specifications for the Dyness 40A MPPT Solar Charge Controller (Model ARM24V-40A):
- 디스플레이 유형: 액정표시장치
- 제조업체: 다이네스
- 제품 크기: 10.09 x 7.08 x 3.24인치(10.09인치 길이 x 7.08인치 너비 x 3.24인치 높이)
- 품목 무게: 4.4파운드
- 품목 모델 번호: ARM24V-40A
- 필요한 배터리: 아니요
- 포함된 구성 요소: 사용자 설명서
- 색상: 검은색
- 권tage: 24볼트(DC)
7. 보증 및 지원
Dyness is committed to providing excellent customer service and support for your product.
애프터 서비스
Dyness offers professional technical support and online customer service with a fast response time within 24 hours. Should you encounter any product-related issues or have questions, please do not hesitate to contact the Dyness support team directly. They are available to assist you.
