SMALLRIG 후지필름 X 하프 카메라(모델 5219)용 가죽 케이스 키트

1. 서론

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your SMALLRIG Leather Case Kit, Model 5219, designed specifically for the FUJIFILM X Half camera. This kit offers enhanced protection and a retro aesthetic, ensuring your camera is both secure and stylish.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Full-Cover Carrying Bag x 1
• Half Leather Case x 1
• Woven Shoulder Strap x 1
• Flat Wrench x 1
• 오링 x 1
• Protective Pads x 1

Figure 2.1: Components of the SMALLRIG Leather Case Kit (Model 5219).

3. 설정

3.1 Installing the Half Leather Case

1. Align your FUJIFILM X Half camera with the half leather case.
2. Gently slide the camera into the case, ensuring a snug fit around the base and sides.
3. Secure the camera to the half case using the integrated 1/4"-20 screw located at the bottom. Use the provided flat wrench to tighten the screw clockwise until secure.

Figure 3.1: FUJIFILM X Half camera installed in the half leather case.

3.2 Attaching the Full-Cover Carrying Bag

1. With the camera in the half case, insert it into the full-cover carrying bag.
2. Ensure the lens portion of the camera aligns with the molded lens cover of the bag.
3. Close the magnetic flap securely over the lens.

3.3 Attaching the Woven Shoulder Strap

1. Locate the strap attachment points on the full-cover carrying bag.
2. Thread each end of the woven shoulder strap through the attachment loops and secure them firmly.
3. 편안한 착용감을 위해 스트랩 길이를 조절하세요.

Figure 3.2: Camera with full-cover case and shoulder strap.

4. 사용 설명서

4.1 Accessing Camera Functions

The half leather case is designed to allow full access to essential camera functions without removal. This includes the body screen, buttons, and focus mode controls.

Figure 4.1: Camera in half case with accessible controls.

4.2 Battery and SD Card Access

A dedicated flap on the bottom of the half leather case provides direct access to the battery compartment and SD card slot, eliminating the need to remove the camera from the case for battery changes or memory card access.

Figure 4.2: Easy access to battery and SD card.

4.3 삼각대 장착

The integrated 1/4"-20 threaded hole on the bottom of the half leather case allows for direct mounting to a tripod without removing the case.

Figure 4.3: Tripod mounting point on the half case.

4.4 Built-in Card Pocket

The full-cover carrying bag includes a discreet card pocket inside the back panel, suitable for storing spare SD cards, IDs, or credit cards.

Figure 4.4: Internal card pocket for storage.

5. 유지관리

5.1 청소 지침

• For the leather exterior, wipe gently with a soft, dry cloth. For deeper cleaning, use a specialized leather cleaner and conditioner according to the product's instructions.
• The suede interior can be cleaned with a soft brush to remove dust and debris. Avoid excessive moisture.
• The woven shoulder strap can be hand-washed with mild soap and water, then air-dried.

Figure 5.1: Suede interior for camera protection.

5.2 보관

Store the leather case kit in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.

6. 문제 해결

6.1 Fit and Compatibility

• 색상 변화: Due to the use of genuine leather, slight color differences may occur. This is a natural characteristic of the material.
• 액세서리 호환성: The case is compatible with SmallRig thumb grips, UV/VND filters, and Fujifilm X half lens hoods. It is 호환되지 않음 with L-brackets. Ensure any attached accessories do not obstruct the case's fit or function.

7. 사양

8. 제품 비디오

9. 보증 및 지원

9.1 보증 정보

Specific warranty details for the SMALLRIG Leather Case Kit (Model 5219) are not provided in this manual. Please refer to the product packaging or contact SMALLRIG customer service for warranty terms and conditions.

9.2 고객 지원

For any questions, technical assistance, or support regarding your SMALLRIG Leather Case Kit, please visit the official SMALLRIG web해당 웹사이트를 방문하거나 고객 서비스 부서에 직접 문의하십시오. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 안내문에 나와 있습니다. web대지.