1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Sensor IP65, Model IR_OUT_GA. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image 1.1: The SEBSON Outdoor Motion Sensor IP65, a charcoal-colored unit designed for wall or ceiling mounting.
2. 안전 지침
- 설치는 현지 배선 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 설치 또는 유지 관리 전에 전원 공급 장치가 분리되어 있는지 확인하십시오.
- Do not exceed the maximum load capacity specified in the technical data.
- This product is designed for outdoor use with IP65 protection; however, avoid direct high-pressure water jets.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
패키지에는 다음이 포함됩니다.
- 1 x SEBSON IR Motion Sensor IP65
- 장착 액세서리(나사, 벽면 플러그)
- 사용 설명서(본 문서)
4. 제품 특징
The SEBSON Outdoor Motion Sensor IP65 is an infrared (IR) motion sensor designed for reliable outdoor use. Key features include:
- 다양한 장착: Suitable for both wall and ceiling surface mounting.
- 넓은 감지 범위: Up to 24 meters with a 360° angle when ceiling-mounted, or 12 meters with a 180° angle when wall-mounted.
- 프로그래밍 가능한 설정: Adjustable duty cycle (light duration), ambient brightness (LUX), and detection sensitivity.
- 회전 기능: The sensor head can be vertically swiveled by 180° for precise detection area adjustment.
- 높은 보호 등급: IP65 rated for outdoor weather resistance.
- LED 호환: Supports LED lighting up to 600W and incandescent lamp최대 1200W.
이미지 4.1: 이상view of key features including detection range, power compatibility, IP rating, and adjustable settings.
Image 4.2: The sensor head can be swiveled vertically by 180 degrees to adjust the detection area.
5. 설정 및 설치
5.1 설치 위치
Choose a suitable location for mounting the sensor. Consider the desired detection area and avoid placing it near heat sources, air conditioning units, or areas with frequent, unwanted movement (e.g., swaying branches) that could trigger false detections.
- 천장 장착: Provides a 360° detection angle with a range of 10m to 24m. Ideal for open areas.
- 벽면 장착: Provides a 180° detection angle with a range of 5m to 12m. Suitable for pathways or specific directional coverage.
이미지 5.1: Example of the motion sensor installed on an outdoor wall.
Image 5.2: Detection range and angle variations for ceiling and wall installations.
5.2 Wiring (3-Wire Installation)
The sensor requires a 3-wire connection. Ensure the power supply is OFF before proceeding.
- Connect the Live (L) wire from the power supply to the Live input terminal on the sensor.
- Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the sensor.
- Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture.
- Connect the Neutral (N) wire from the lighting fixture to the Neutral input terminal on the sensor (or directly to the main Neutral).
- 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
Image 5.3: Base of the sensor showing wiring access points.
5.3 물리적 설치
- Mark the drilling points on the wall or ceiling using the sensor's base as a template.
- 필요한 경우 구멍을 뚫고 벽면 플러그를 삽입하세요.
- Secure the sensor base to the mounting surface with screws.
- Perform wiring as described in section 5.2.
- Attach the sensor body to the base, ensuring a tight seal for IP65 protection.
- Adjust the sensor head to the desired angle using the swivel mechanism.
6. 작동 지침 및 조정
The SEBSON motion sensor features three adjustable settings to customize its operation:
Image 6.1: Adjustment dials for TIME, SENS (Sensitivity), and LUX (Ambient Brightness).
6.1 TIME (Switch-off Delay)
This dial adjusts how long the connected light remains ON after motion is no longer detected. The range is approximately 10 seconds to 15 minutes.
- Turn the dial clockwise to increase the duration.
- Turn the dial counter-clockwise to decrease the duration.
6.2 LUX (Ambient Brightness)
This dial determines the ambient light level at which the sensor will activate. The range is 0.1 LUX (darkness) to 2000 LUX (daylight).
- Set to the 'sun' symbol (max LUX) for activation during both day and night.
- Set to the 'moon' symbol (min LUX) for activation only in low light conditions or darkness.
- Adjust incrementally to find the desired activation threshold.
6.3 SENS (Sensitivity/Detection Range)
This dial adjusts the sensitivity of the motion detection, effectively controlling the detection range.
- Turn clockwise for maximum sensitivity and detection range.
- Turn counter-clockwise for minimum sensitivity and detection range.
- Adjust to prevent false triggers from distant objects or small animals.
7. 유지관리
- Regularly clean the sensor lens with a soft, damp cloth to ensure optimal detection performance. Do not use abrasive cleaners.
- Check wiring connections periodically for any signs of wear or corrosion.
- Ensure the sensor is free from obstructions like spiderwebs, leaves, or snow, which can impair its function.
- No user-serviceable parts inside. Do not attempt to open the main housing.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Light does not turn ON when motion is detected. |
|
|
| 표시등이 계속 켜져 있습니다. |
|
|
| Light turns ON without apparent motion (false triggers). |
|
|
9. 사양
| 모델 번호 | IR_OUT_GA |
| 운영 볼륨tage | 220-240VAC 50Hz |
| 설치 유형 | 3-wire, Surface-mounted (Wall/Ceiling) |
| Max. Power Consumption (Incandescent) | 1200와트 |
| Max. Power Consumption (LED/Energy-saving) | 600와트 |
| 전력 소비량(대기) | 0.5와트 |
| 감지 속도 | 0.6 - 1.5 m/s |
| Detection Range (Ceiling Mount) | 10m - 24m (360°) |
| Detection Range (Wall Mount) | 5m - 12m (180°) |
| Ambient Brightness Adjustment | 0.1 - 2000 LUX |
| 보호 등급 | IP65 |
| Switch-off Delay (Duty Cycle) | Min. 10s (±3s) - Max. 15 min (±2 min) |
| 주변 온도 | -20 °C ~ +40 °C |
| 습기 | <93% 상대습도 |
| Vertical Swivel Angle | 180° |
| 치수(길이 x 너비 x 높이) | 121 x 83 x 83mm |
| 재료 | 플라스틱 |
| 색상 | 무연탄 |
| 무게 | 175그램 |
이미지 9.1: 제품 치수
10. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
