소개
Thank you for choosing the SmallRig CT25 Overhead Tripod. This versatile tripod (Model 5290) is designed to enhance your photography and videography experience, offering features like overhead shooting, monopod conversion, and support for multiple devices. This manual will guide you through the proper setup, operation, and maintenance to ensure optimal performance and longevity of your equipment.
Image: The SmallRig CT25 Overhead Tripod in its primary configuration, showcasing its ability to mount both a camera and a smartphone simultaneously on its horizontal arm.
1. 설정
1.1 포장 풀기 및 구성 요소 식별
Carefully unpack all components from the packaging. Verify that all included items are present:
- 삼각대 × 1
- 캐리백 × 1
- 육각 렌치 × 3
- Overhead Shooting Attachment × 1
- 후크 × 1
- Mobile Phone Clip × 1
- 보증 카드 × 1
Image: A visual representation of the SmallRig CT25 tripod and its complete set of accessories, including the carry bag, hex wrenches, overhead attachment, hook, and mobile phone clip.
1.2 Basic Tripod Assembly
- 삼각대를 안정적이고 평평한 표면에 놓으십시오.
- 삼각대 다리를 펼치려면asing the leg locks. Adjust the leg angles for desired stability.
- Extend the center column to the desired height. Secure all locks firmly.
- Attach your camera or other compatible device to the ball head's quick release plate. Ensure it is securely fastened.
1.3 Converting to Overhead Shooting Mode
The CT25 tripod features a horizontal center column for overhead shooting.
- 중앙 기둥 아래쪽에 있는 손잡이를 풀어주세요.
- Press the button located at the base of the center column and pull the column upwards until it can be tilted.
- Tilt the center column 90 degrees to a horizontal position.
- Push the center column back down and secure the knob firmly to lock it in place.
- Attach your camera or smartphone to the end of the horizontal arm using the appropriate mount.
Image: Step-by-step visual guide on how to convert the tripod's center column from vertical to horizontal for overhead shooting, showing the button and rotation mechanism.
2. 사용 설명서
2.1 높이 조정
The 5-section legs and adjustable center column allow for a wide range of heights, from a minimum of 52.5 cm to a maximum of 164 cm.
- To adjust leg height: Release the twist locks on each leg section, extend or retract the legs, and then firmly tighten the twist locks.
- To adjust center column height: Loosen the center column lock, raise or lower the column, and then firmly tighten the lock.
Image: A visual scale demonstrating the various working heights of the tripod, ranging from its minimum height to its maximum extension of 164cm, with human silhouettes for context.
2.2 360° Panorama Shooting
The integrated ball head allows for smooth 360° panoramic rotation and tilt adjustments, providing flexibility for creative compositions.
- Loosen the panoramic lock knob on the ball head.
- Rotate your camera to the desired angle.
- Tighten the panoramic lock knob to secure the position.
Image: A camera mounted on the tripod's horizontal arm, illustrating its ability to rotate 360 degrees for panoramic photography against a scenic background.
2.3 모노포드 변환
One of the tripod legs can be detached and converted into a monopod for increased portability and flexibility in tight spaces.
- Locate the leg with the foam grip.
- Twist the leg counter-clockwise to detach it from the tripod chassis.
- Unscrew the cap from the top of the detached leg.
- Attach the ball head (or a separate monopod head) to the top of the detached leg.
- Extend the monopod sections to your desired height and secure the twist locks.
Image: A three-step illustration demonstrating the process of detaching one of the tripod legs, attaching the ball head, and forming a standalone monopod.
2.4 Dual Device Support
The horizontal arm allows for mounting two devices simultaneously, such as a camera and a smartphone, or a camera and an accessory light.
- Ensure the tripod is in overhead shooting mode (horizontal arm).
- Attach your primary camera to one end of the arm using the ball head.
- Use the included mobile phone clip or another accessory mount to attach a second device to the other end of the arm.
2.5 액세서리 부착
The tripod features 1/4"-20 threaded holes for attaching additional accessories like magic arms (e.g., SmallRig models 3874, 3959) or external lights.
Image: A user attaching an accessory light to the tripod's horizontal arm via a 1/4"-20 threaded hole, highlighting the versatility for expanding equipment.
2.6 Load Capacity Guidelines
Adhering to the load capacity limits is crucial for stability and safety.
- 일반 모드: 최대 하중 용량은 5kg입니다.
- Overhead Mode: 최대 하중 용량은 3kg입니다.
- Counterweight Hook: The included hook can support up to 1 kg of counterweight to enhance stability, especially during overhead shooting.
Image: A visual breakdown of the tripod's maximum load capacity: 5kg in normal vertical mode and 3kg in horizontal overhead mode, with a note about the 1kg hook capacity.
3. 유지관리
- 청소: 사용 후에는 부드럽고 마른 천으로 삼각대를 닦아주세요. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아내십시오.amp 천과 순한 비누로 닦은 후 완전히 말리세요. 강한 화학 물질은 피하세요.
- 매끄럽게 하기: Periodically check leg locks and moving parts for smooth operation. Apply a small amount of silicone-based lubricant if necessary, avoiding excessive application.
- 저장: Store the tripod in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures.
- 점검: Regularly inspect all screws, knobs, and leg locks for tightness. Tighten any loose components using the provided hex wrenches.
4. 문제 해결
4.1 안정성 문제
- 고르지 않은 표면: Ensure all tripod legs are fully extended and adjusted to match the terrain.
- Loose Locks: Verify that all leg locks and the center column lock are firmly tightened.
- 초과 적재: Check that the total weight of your equipment does not exceed the specified load capacity for the current mode (5kg for normal, 3kg for overhead).
- 진동: For overhead shooting, attach a counterweight (up to 1kg) to the hook located at the bottom of the center column to improve stability.
4.2 Difficulty Adjusting Height/Angle
- Stiff Locks: Ensure all locking mechanisms are fully loosened before attempting to adjust. Do not force adjustments.
- Center Column Rotation: Remember to press the button at the base of the center column before attempting to tilt it for overhead mode.
5. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 스몰 릭 |
| 모델 번호 | 5290 |
| 재료 | 알루미늄 합금, ABS |
| 품목 무게 | 1.6kg(1600그램) |
| 최대 높이 | 164cm |
| 최소 높이 | 52.5cm |
| 접힌 크기 | 52.5cm |
| 다리 섹션 | 5 |
| Load Capacity (Normal Mode) | 5kg |
| Load Capacity (Overhead Mode) | 3kg |
| Counterweight Hook Capacity | 1kg |
| 머리 유형 | Ball head with pan handle |
| 호환 장치 | Camera, Video Camera, Microphone, Monitor, Smartphone |
6. 보증 정보
Specific warranty details for the SmallRig CT25 Overhead Tripod are typically provided with the product packaging, often on a dedicated warranty card. Please refer to the included "Warranty Card" for information regarding warranty period, coverage, and claims process.
For further inquiries, please contact SmallRig customer support.
7. 고객 지원
If you encounter any issues or have questions regarding your SmallRig CT25 Overhead Tripod that are not covered in this manual, please contact SmallRig customer support through their official web제품을 구매한 사이트 또는 소매업체.
온라인 리소스: For additional tips, tutorials, and product information, visit the official SmallRig web대지: www.smallrig.com
