소개
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Perlegear Dual Monitor Stand with Integrated Power Strip, model PGTVS41B. This freestanding monitor stand is designed to support two monitors, enhancing your workspace ergonomics and organization. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
안전 정보
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or faulty.
- Verify that your monitors' weight and VESA patterns are within the specified limits (up to 22 lbs per arm, VESA 75x75mm or 100x100mm).
- 조립 시 부품 손상을 방지하기 위해 나사를 과도하게 조이지 마십시오.
- 조립 중에는 어린이와 애완동물이 접근하지 않도록 주의하세요. 작은 부품으로 인해 질식 위험이 있습니다.
- 넘어지지 않도록 안정적이고 평평한 표면에 거치대를 놓으십시오.
- Do not exceed the electrical ratings of the integrated power strip.
패키지 내용
패키지에 다음 구성품이 모두 포함되어 있는지 확인하십시오.
- 유리베이스
- Main Support Pole with Integrated Power Strip
- 듀얼 모니터 암
- VESA 플레이트 (2개)
- 하드웨어 키트(나사, 와셔, 스페이서, 육각 렌치)
- 전원 케이블(6.5피트)
- 케이블 관리 클립
설치 지침
Follow these steps to assemble your Perlegear Dual Monitor Stand:
- Step 1: Assemble the Base and Pole
Attach the main support pole to the glass base using the provided screws and Allen wrench. Ensure it is securely fastened and stable.
Image: Fully assembled Perlegear Dual Monitor Stand, showing the main pole, monitor arms, and glass base.
- Step 2: Attach Monitor Arms
Slide the dual monitor arms onto the main support pole. Adjust their height to your preference and secure them with the locking mechanism.
- 3단계: 모니터에 VESA 플레이트 부착
Carefully attach the VESA plates to the back of your monitors using the appropriate screws, washers, and spacers from the hardware kit. Ensure the VESA pattern (75x75mm or 100x100mm) matches your monitor.
Image: Diagram illustrating VESA compatibility (75x75mm, 100x100mm) and supported monitor sizes (13-32 inches) and weight (22 lbs per arm).
- 4단계: 모니터 장착
With assistance if needed, carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click into place securely.
- 5단계: 멀티탭 연결
Plug the provided 6.5ft power cable into the integrated power strip on the main pole, then connect it to a wall outlet. The power strip includes 1 USB-A port (5V/2.1A), 1 USB-C port (5V/2.1A), and 3 AC outlets (120V/12A).
이미지: 클로즈업 view of the integrated power strip, detailing the USB-A, USB-C, and three AC outlets, along with the 6.5ft power cable.
- 6단계: 케이블 관리
Route monitor cables and power cords through the integrated cable management clips on the pole and arms to maintain a tidy workspace.
이미지: 전직ample of a streamlined workspace utilizing the monitor stand's cable management features, showing monitors, keyboard, and other peripherals.
작동 지침
The Perlegear Dual Monitor Stand offers various adjustments for optimal view편안함을.
- 높이 조정: The monitor stand has four height settings, allowing you to adjust the screen height from 10.79 inches to 14.92 inches. This helps achieve an ergonomic viewing angle, reducing neck and eye strain.
- 기울기 조정: Each monitor can be tilted ±45° to reduce glare and find your preferred view잉 각도.
- 회전 조정: Monitors can swivel ±90° horizontally, allowing for easy screen sharing or multi-user setups.
- 회전 조정: Rotate your monitors 360° to switch between landscape and portrait orientation effortlessly.
- 유연한 팔 위치: The monitor arms feature multiple joints that allow for flexible positioning, including ±105° articulation at the main arm joints and ±90° swivel at the monitor attachment point.
- 멀티탭 사용법: Plug your devices into the USB-A, USB-C, or AC outlets on the integrated power strip for convenient desktop power access.
Image: Illustration demonstrating the ergonomic benefits of adjustable screen height, showing a user with correct posture and the stand's height range (10.79" to 14.92").
Image: Diagrams illustrating the ±45° tilt, ±90° swivel, and 360° rotation capabilities of the monitor mounts.
이미지: 오버헤드 view demonstrating the flexible articulation of the monitor arms, showing ±105° movement at various joints and ±90° swivel for screen positioning.
유지
To ensure the longevity and proper function of your monitor stand:
- 청소: Wipe the stand and base with a soft, dry cloth. For stubborn marks, a slightly damp 천을 사용하여 세척한 후 건조시키세요. 연마성 세척제나 용제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 케이블 관리 : Ensure cables are not pinched or excessively strained. Adjust cable routing as needed.
문제 해결
모니터 스탠드에 문제가 발생하면 다음의 일반적인 해결 방법을 참조하십시오.
- 받침대가 흔들거립니다. Ensure the base is on a flat, stable surface. Check all assembly screws, especially those connecting the pole to the base and the arms to the pole, are securely tightened.
- 모니터 수평이 맞지 않습니다. Adjust the tilt and height of individual monitor arms to align them. Ensure VESA plates are securely attached to monitors.
- 멀티탭이 작동하지 않습니다. Verify the main power cable is securely plugged into both the stand and a functional wall outlet. Check if the wall outlet is receiving power. Ensure devices are properly plugged into the power strip.
- 모니터 위치 조정에 어려움이 있습니다. Loosen the adjustment screws slightly, make the adjustment, then retighten to secure the position. Do not force adjustments.
명세서
| 모델 | PGTVS41B |
| 모니터 호환성 | 13" - 32" Flat or Curved Screens |
| 중량 용량 | 팔당 최대 10kg(22파운드) |
| VESA 패턴 | 75x75mm, 100x100mm |
| 높이 조절 범위 | 10.79인치 - 14.92인치(27.4cm - 37.9cm) |
| 기울기 각도 | ±45° |
| 회전 각도 | ±90° |
| 회전 | 360° |
| 일체형 멀티탭 | 1x USB-A (5V/2.1A), 1x USB-C (5V/2.1A), 3x AC Outlets (120V/12A) |
| 전원 케이블 길이 | 6.5 피트 (2 미터) |
| 재료 | 탄소강, 강화 유리 |
| 색상 | 검은색 |
보증 및 지원
Perlegear products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Perlegear web저희 웹사이트를 방문해 주세요. 고객 서비스팀은 제품 관련 문의 사항이나 궁금한 점이 있으시면 언제든지 도와드리겠습니다.
