1. 제품 오버view
The WALI Dual Ultrawide Monitor Mount is designed to securely hold two ultrawide, heavy-duty, or curved monitors, enhancing your workspace ergonomics and freeing up desk space. This robust monitor arm supports screens from 17 to 49 inches, with a weight capacity of up to 44 lbs per arm. It features an advanced gas spring mechanism for flexible adjustments, including tilt, swivel, and rotation, allowing for various screen configurations such as vertical stacking.
Image: The WALI Dual Ultrawide Monitor Mount supporting two monitors in a stacked vertical configuration.
Image: Visual representation of the WALI Dual Ultrawide Monitor Mount supporting different monitor sizes, including 45-inch, 40-inch, and 49-inch screens in various orientations.
2. 안전 정보
Please read this entire instruction manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. Keep these instructions in a safe place for future reference.
- Do not exceed the maximum weight capacity of 44 lbs (20 kg) per arm. Serious injury or property damage may occur.
- Ensure the mounting surface (desk) can safely support the combined weight of the equipment and all attached hardware.
- Use safety gear and proper tools for installation.
- 이 제품에는 삼킬 경우 질식 위험이 있을 수 있는 작은 품목이 포함되어 있습니다. 어린이의 손이 닿지 않는 곳에 보관.
- Always check that the mount is securely fastened before attaching monitors.
3. 패키지 내용
아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하세요.
- 1 x WALI Ultrawide Monitor Arm (Dual Arms)
- 장착 하드웨어 키트(다양한 나사, 와셔, 스페이서)
- 사용자 설명서
- Required Tools (e.g., Allen wrenches)
4. 설정 및 설치
The WALI Dual Ultrawide Monitor Mount offers two installation options: C-clamp and grommet mount. Both methods are suitable for desk thicknesses between 0.47 inches and 1.77 inches.
4.1 설치 방법 선택
Determine whether to use the C-clamp for desks without a pre-drilled hole or the grommet mount for desks with an existing hole.
이미지: 상세 view C-cl의amp and grommet mounting options, showing compatibility with desk thicknesses from 0.47" to 1.77".
4.2 Attaching the Mount to Your Desk
Follow the specific instructions provided in the included hardware kit for your chosen mounting method. Ensure the mount is stable and securely tightened to prevent movement.
4.3 Attaching Monitors to the Arms
This mount is compatible with VESA patterns of 75x75mm and 100x100mm. Before mounting, ensure your monitors meet these VESA standards and do not exceed the 44 lbs weight limit per arm.
- Attach the VESA plate to the back of each monitor using the appropriate screws from the hardware kit.
- Slide the monitor with the attached VESA plate onto the arm's mounting head.
- Secure the monitor by tightening any locking screws or mechanisms on the VESA head.
Image: The WALI monitor arm securely holding two monitors, emphasizing its capacity of up to 44 lbs per arm.
5. 작동 및 조정
The WALI Dual Ultrawide Monitor Mount provides extensive flexibility for optimal view다양한 각도와 인체공학적 위치.
5.1 모니터 위치 지정
Each arm allows for:
- 경사: +50°/-20° for reducing glare and finding the perfect vertical angle.
- 받침: +/-90° to share your screen or adjust for different tasks.
- 회전: 360° for switching between landscape and portrait orientations.
- 높이 조정: Up to 18.9 inches of smooth vertical movement thanks to the gas spring lift.
- 확대: Max extension of 21.7 inches from the pole.
Image: Diagram illustrating the adjustable features of the WALI monitor arm, including swivel (+/-90°), tilt (+50°/-20°), 360° rotation, maximum height of 29.8", and maximum extension of 21.7".
Image: A user demonstrating an ergonomic setup with two vertically stacked monitors, showcasing the flexibility of the WALI monitor arm for different work scenarios.
5.2 가스 스프링 장력 조정
The gas springs allow for effortless adjustments. If an arm drops or rises unexpectedly, adjust the tension using the provided Allen key.
- 팔을 수평으로 위치시키고 잡습니다.
- 암에 있는 장력 조절 나사를 찾으십시오.
- 회전하다 시계 방향으로 if the arm rises too easily or does not stay down.
- 회전하다 반 시계 방향 if the arm drops or is difficult to raise.
- Adjust until the arm stays in the desired position when released.
Image: Visual guide for adjusting the gas spring tension. Turn counter-clockwise if the arm drops, and clockwise if the arm rises.
5.3 Tilting Ultrawide Monitors
For ultrawide monitors, specific steps may be needed to achieve smooth tilting:
- Before mounting the monitor, adjust the gas spring tension (A & B) to the maximum.
- If the monitor does not tilt smoothly after mounting, loosen the screw as shown in the diagram until smooth tilting is achieved.
Image: Step-by-step instructions for tilting ultrawide monitors, including pre-adjustment of gas spring tension and loosening a specific screw for smooth movement.
5.4 케이블 관리
Integrated cable management clips are provided to route and conceal cables along the arms and pole, maintaining a clean and organized workspace.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your WALI monitor mount.
- 청소: 부드러운 천으로 마운트를 닦아주세요.amp 옷감. 연마성 세제를 피하십시오.
- 견고성 확인: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- Gas Spring Check: If the arms become difficult to adjust or do not hold position, refer to the "Gas Spring Tension Adjustment" section.
Image: An illustration of the WALI monitor arm undergoing a "20000 Press Test," signifying its robust and stable construction for long-term use.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Monitor arm drops or does not hold position. | 모니터 무게에 비해 가스 스프링 장력이 너무 낮습니다. | Increase gas spring tension by turning the adjustment screw 시계 방향으로. 섹션 5.2을 참조하십시오. |
| Monitor arm is difficult to move or rises too quickly. | 가스 스프링 장력이 너무 높습니다. | Decrease gas spring tension by turning the adjustment screw 반 시계 방향. 섹션 5.2을 참조하십시오. |
| Monitor does not tilt smoothly (especially ultrawide). | Tilt mechanism is too tight. | Loosen the specific tilt adjustment screw as shown in Section 5.3. |
| 마운트가 불안정하거나 흔들리는 느낌이 듭니다. | 장착 CLamp/grommet is not sufficiently tightened. | C-cl을 다시 조여주세요amp or grommet bolt to the desk. Ensure desk thickness is within limits. |
8. 제품 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | B0FBGG2SX3 |
| 상표 | 왈리 |
| 화면 크기 호환성 | 17" - 49" (per arm) |
| 중량 용량 | 팔당 최대 20kg(44파운드) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 책상 두께(C-clamp/그로밋) | 0.47인치 - 1.77인치 |
| 기울기 범위 | +50° / -20° |
| 스위블 범위 | +/-90° |
| 회전 | 360° |
| 최대 높이 조절 | 18.9" (gas spring lift) |
| 재료 | 금속 |
| 색상 | 검은색 |
Image: Compatibility chart for the WALI monitor mount, detailing supported screen sizes (17"-49"), weight capacity (44 lbs), VESA sizes (75x75mm/100x100mm), and desktop thickness for clamp-on and grommet mounts (0.47"-1.77").
9. 보증 및 고객 지원
WALI products are designed for durability and performance. For any questions, concerns, or assistance with your product, please contact WALI customer support. Our experienced and friendly US-based customer support team is available to assist you 7 days a week.
Please refer to your product packaging or the official WALI web최신 보증 정보 및 연락처는 해당 사이트를 참조하십시오.
