매뉴얼+

BRIKSMAX 75415

BRIKSMAX 2.0 Light Kit Instruction Manual for Lego Kylo Ren Helmet (Set 75415)

모델: 75415

1. 서론

This instruction manual provides detailed guidance for installing and operating your BRIKSMAX 2.0 LED Light Kit, specifically designed for the Lego Star Wars 75415 Kylo Ren Helmet set. This kit enhances your Lego model with innovative lighting effects, bringing it to life with vibrant colors and a realistic visual display. Please read all instructions carefully before beginning installation.

메모: The Lego Kylo Ren Helmet set (75415) is not included with this light kit.

2. 포함 사항

아래 나열된 모든 구성 요소가 패키지에 들어 있는지 확인하세요.

  • LED Light Kit components
  • 종이 지침
  • 사용자 가이드
  • AA Battery Box (batteries not included)
  • USB 케이블
Contents of the BRIKSMAX 2.0 Light Kit package, including LED lights, instructions, USB cable, and a battery box.
Figure 2.1: Package contents of the BRIKSMAX 2.0 Light Kit.

3. 설정 및 설치

Follow these steps to integrate the light kit with your Lego Kylo Ren Helmet (Set 75415). It is recommended to have the Lego set fully assembled before beginning the light kit installation.

  1. 레고 모델을 준비하세요: Carefully identify the areas on your Lego Kylo Ren Helmet where the lights will be installed. Some disassembly of specific Lego bricks may be required to properly route wires and place light components.
  2. Install LED Components: Attach the individual LED lights and light strips to the designated areas of the Lego model. The kit includes wire organizer parts designed to help conceal wires and prevent breakage, ensuring a neat and secure fit.
  3. Connect Expansion Boards: Connect the LED wires to the expansion boards. Ensure all connections are firm. The upgraded crafts feature brick shells around lights and expansion boards to reduce exposed components and improve aesthetics.
  4. 전원 연결: Connect the expansion boards to the provided AA Battery Box or USB cable. If using the battery box, insert the required AA batteries (not included).
  5. 테스트 조명: Before reassembling all Lego pieces, briefly connect power to test if all lights are functioning correctly.
  6. 최종 조립: Carefully reassemble any disassembled Lego bricks, ensuring wires are not pinched and are neatly tucked away using the wire organizer parts.
Close-up of a Lego structure showing a red LED light and white wires neatly routed and secured by grey Lego-compatible wire organizer bricks.
그림 3.1: 예ample of wire management using included organizer parts.
Comparison image showing BRIKSMAX's safer and softer wiring with larger, easier-to-install connectors versus another brand's unsafe and glaring wiring with small, hard-to-install connectors.
Figure 3.2: Comparison of BRIKSMAX wiring and connectors.

4. 사용 설명서

Once installed, operating your BRIKSMAX light kit is straightforward.

  • 전원 켜기/끄기: Connect the USB cable to a power source or ensure batteries are correctly inserted into the battery box. The lights should illuminate automatically. Disconnect power to turn off.
  • 조명 모드: The kit supports color changing and multiple lighting modes. Refer to the specific paper instructions included in your package for details on how to cycle through these modes, typically via a button on the battery box or a remote control if included.
A Lego Kylo Ren Helmet with the BRIKSMAX light kit installed, shown with lights on (red and blue) and lights off, demonstrating the visual impact.
Figure 4.1: Kylo Ren Helmet with lights on and off.
4가지 세부 사항 views of the illuminated Lego Kylo Ren Helmet, highlighting the red lights in the visor and faceplate, and blue lights in the base.
Figure 4.2: Detailed lighting effects on the Kylo Ren Helmet.

Video 4.1: Official product video demonstrating the BRIKSMAX 2.0 Light Kit for Lego Star Wars 75415 Kylo Ren Helmet Set in action, showcasing its lighting effects.

5. 유지관리

  • 청소: Use a soft, dry cloth to gently wipe dust from the LED components and wires. Avoid using liquids or abrasive cleaners.
  • 와이어 관리: Ensure wires are not pulled or bent sharply, as this can cause damage. The included wire organizers help protect the wires.
  • 배터리 교체: If using the battery box, replace AA batteries when lights dim or cease to function. Ensure correct polarity.
  • 저장: When not in use for extended periods, disconnect the power source (remove batteries or unplug USB) to conserve power and prevent potential issues.

6. 문제 해결

문제가능한 원인해결책
표시등이 켜지지 않습니다.
  • 전원 공급이 없습니다.
  • 배터리가 잘못 설치되었습니다.
  • 느슨한 전선 연결.
  • 손상된 구성 요소.
  • Ensure USB cable is connected to a working power source or fresh batteries are installed in the battery box.
  • 배터리 극성을 확인하십시오.
  • Verify all wire connections to LEDs and expansion boards are secure.
  • Inspect components for visible damage. Contact support if damaged.
조명이 어둡거나 깜빡입니다.
  • 배터리 전원이 부족합니다.
  • 연결이 느슨함.
  • Replace batteries or use a different USB power source.
  • 모든 전선 연결을 확인하십시오.
LED adhesive strips peel off.
  • Insufficient adhesion.
  • Surface not clean.
  • Ensure Lego surfaces are clean and dry before application.
  • Apply gentle pressure for several seconds after placing the strip.
  • If peeling persists, a small amount of additional adhesive (e.g., clear craft glue, not super glue) can be used carefully, ensuring it does not damage the LED or Lego bricks.
설치에 어려움이 있습니다.
  • Instructions unclear.
  • Complex wire routing.
  • Refer to the detailed paper instructions and user guide.
  • Utilize the provided wire organizer parts to manage cables.
  • Contact BRIKSMAX customer support for further assistance.

7. 사양

특징세부 사항
상표브릭스맥스
모델 번호75415 (for Lego Kylo Ren Helmet)
광원 유형발광 다이오드(LED)
전원Battery Powered (AA batteries, not included) or USB
전구 기능Color changing, multiple lighting modes
광원의 수2
최대 광 출력100루멘
재료플라스틱
추천연령8세 이상
제품 치수6.5 x 4.72 x 1.57 인치
품목 무게6.3온스 / 180그램

8. 보증 및 지원

BRIKSMAX is committed to providing high-quality products and excellent customer service. Our LED lighting kits are made from safe and reliable materials.

  • 손상되었거나 누락된 부품: If you receive any damaged or missing parts, please contact BRIKSMAX customer service immediately for a replacement.
  • 기술 지원: For any installation difficulties or operational questions not covered in this manual, please reach out to our support team.
  • 연락처 정보: Please refer to the contact details provided in your product packaging or visit the official BRIKSMAX web지원 사이트입니다.

관련 문서 - 75415

사전view BRIKSMAX LED Lighting Kit Installation Guide for Kylo Ren's Shuttle 75256
Detailed instructions for installing the BRIKSMAX LED lighting kit (Item No. BX285 V2.0) for the Kylo Ren's Shuttle 75256 building set. Enhance your model with illuminated details.
사전view BRIKSMAX LED Lighting Kit for Kylo Ren's Shuttle 75256 - Installation Guide
Step-by-step instructions for installing the BRIKSMAX LED lighting kit for the LEGO Kylo Ren's Shuttle 75256 set. Enhance your model with illuminated details.
사전view BRIKSMAX Captain Rex Helmet 75349 Building Instructions
Detailed step-by-step instructions for assembling the BRIKSMAX Captain Rex Helmet 75349 building block set, including light kit installation. Learn how to build your own Captain Rex helmet with BRIKSMAX.
사전view BRIKSMAX AT-AT Driver Helmet Lighting Kit Installation Guide
Enhance your LEGO Star Wars AT-AT Driver Helmet model with the BRIKSMAX LED lighting kit. This guide provides detailed instructions for installation.
사전view BRIKSMAX The Razor Crest 75331 LED Lighting Kit Installation Guide
Official installation instructions for the BRIKSMAX LED lighting kit designed for the LEGO Star Wars The Razor Crest 75331 set. This guide provides detailed steps for integrating the lighting system.
사전view BRIKSMAX Darth Vader Helmet 75304 LED Lighting Kit Instructions
Step-by-step instructions for installing the BRIKSMAX LED lighting kit for the LEGO Star Wars Darth Vader Helmet 75304 model (Item No. BX435). Includes detailed guidance on connecting components and powering the lights.