1. 서론
This manual provides essential information for the safe and effective use of your WEST TUNE Laboratory Vacuum Filtration Pump, Model WTVP-10B. Please read this manual thoroughly before operating the device and retain it for future reference. This oilless diaphragm pump is designed for various laboratory applications requiring a reliable vacuum source, such as solvent filtration, distillation, vacuum drying, and extraction.
Figure 1: WEST TUNE Laboratory Vacuum Filtration Pump WTVP-10B. This image shows the compact design of the pump with its integrated vacuum meter and power switch on the front panel, and a metal handle on top for portability. Various accessories like a filter, connectors, and a rubber tube are also displayed.
2. 안전 지침
Always follow these safety precautions to prevent injury and damage to the equipment:
- Ensure the power supply matches the pump's requirements (refer to specifications).
- Do not operate the pump in wet or hazardous environments.
- Keep the pump away from heat sources and direct sunlight.
- Do not block the heat dissipation holes during operation to prevent overheating.
- 유지보수나 청소를 하기 전에 항상 전원을 차단하십시오.
- Avoid direct contact with moving parts during operation.
- This pump is designed for laboratory use. Do not use it for purposes other than those specified.
- In case of malfunction, switch off the pump immediately and consult the troubleshooting section or contact support.
Figure 2: The pump features built-in safety mechanisms including over-temperature protection and short-circuit protection, ensuring reliable and safe operation. The image shows the side of the pump with an electrical cord being plugged in, highlighting the power input and safety icons.
3. 제품 오버view
3.1개의 구성요소
그림 3: 상세 view of the pump's components. The front panel includes a Vacuum Meter and a Metal Switch (power button). The top features a Metal Handle. The bottom has Shock-Absorbing Foot Pads. The rear panel shows the Gas Pipe connection, Muffler, Heat Dissipation Holes, and Power Input.
- 금속 손잡이: 간편한 휴대를 위해.
- Vacuum Meter: Displays the current vacuum level.
- Metal Switch: 전원 ON/OFF 버튼.
- Shock-Absorbing Foot Pads: 작동 중 안정성을 제공하고 진동을 줄여줍니다.
- 가스관 연결: Point for connecting the vacuum tubing.
- 머플러: 작동 소음을 줄여줍니다.
- 방열 구멍: Ensure proper cooling of the internal components.
- 전원 입력: 전원 코드 연결부입니다.
3.2 상자 내용물
- WEST TUNE Laboratory Vacuum Filtration Pump (Model WTVP-10B)
- 전원 코드
- 고무 튜브
- 필터
- 커넥터(다양한 종류)
Figure 4: The image displays the main vacuum pump unit along with its accessories: a power cord, a rubber tube, a filter, and various brass connectors, all essential for setting up and operating the pump.
4. 설정
- 짐 풀기: 펌프와 모든 부속품을 포장에서 조심스럽게 꺼내세요. 손상 여부를 확인하세요.
- 놓기: Place the pump on a stable, level surface. Ensure adequate ventilation around the unit, especially for the heat dissipation holes. The shock-absorbing foot pads should be in full contact with the surface.
- 튜빙 연결: Connect one end of the provided rubber tube to the Gas Pipe Connection on the pump. Secure it firmly.
- 애플리케이션에 연결: Connect the other end of the rubber tube to your laboratory apparatus (e.g., filtration flask, distillation setup) requiring a vacuum. Use appropriate connectors if necessary.
- 전원 연결: Insert the power cord into the Power Input on the pump, then plug the other end into a suitable electrical outlet.
5. 사용 설명서
- 준비: Ensure all connections are secure and the pump is placed correctly.
- 전원 켜기: Press the Metal Switch (power button) on the front panel to turn on the pump. The indicator light on the switch will illuminate.
- 모니터 진공: Observe the Vacuum Meter to monitor the vacuum level being generated. The pump will quickly reach its ultimate vacuum of approximately -0.08 MPa.
- 작업: Allow the pump to operate for the duration required by your experimental procedure. The pump is designed for continuous operation for extended periods.
- 전원 끄기 : Once your application is complete, press the Metal Switch again to turn off the pump.
- 연결 해제: Carefully disconnect the tubing from your apparatus and the pump.
Figure 5: This image highlights the pump's performance characteristics, including strong suction, low noise operation, and the ability to work continuously for 24 hours, making it suitable for demanding laboratory tasks.
6. 유지관리
The WEST TUNE WTVP-10B pump is designed for low maintenance due to its oilless diaphragm technology.
- 오일 프리 작동: This pump does not require oil changes, oil monitoring, or oil treatment, simplifying maintenance and ensuring a cleaner laboratory environment.
- 청소: Periodically wipe the exterior of the pump with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the pump's internal components.
- 필터 검사: Regularly inspect the inline filter (if used) for any blockages or contamination. Replace the filter as needed to maintain optimal performance.
- 관 재료: Check the rubber tubing for cracks, kinks, or blockages. Replace damaged tubing to ensure proper vacuum integrity.
- 저장: When not in use for extended periods, store the pump in a clean, dry, and temperature-controlled environment.
Figure 6: This comparison highlights the key advantage of the WEST TUNE pump: its oil-free design requires no maintenance related to oil changes, unlike traditional oil-based pumps.
7. 문제 해결
펌프에 문제가 발생하면 다음 표에서 일반적인 문제와 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 켜지지 않습니다. | No power supply; faulty power cord; pump switch off. | Check power outlet; ensure power cord is securely connected; press the power switch. |
| Low or no vacuum. | Loose tubing connections; clogged filter; damaged tubing; internal pump issue. | Check all tubing connections for leaks; inspect and clean/replace filter; replace damaged tubing; contact support if problem persists. |
| 비정상적인 소음이나 진동. | Pump not on a stable surface; internal component issue. | Ensure pump is on a flat, stable surface; check if shock-absorbing feet are intact. If noise persists, contact support. |
| Pump overheats and shuts off. | Blocked heat dissipation holes; prolonged operation in high ambient temperature. | Ensure heat dissipation holes are clear; allow pump to cool down; operate in a well-ventilated area. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | WTVP-10B |
| 유형 | Oilless Diaphragm Vacuum Pump (Negative Pressure) |
| 모터 파워 | 15와트 |
| 흡입 속도 | 10L/분 |
| 최고의 진공 | -0.08MPa |
| 소음 수준 | <60dB (XNUMXdB) |
| 무게 | 6파운드(약 2.7kg) |
| 치수(길이 x 너비 x 높이) | 8.66" x 5.12" x 6.69" (approximately 22 x 13 x 17 cm) |
| Valve Diaphragm Material | Premium Rubber |
| 안전 기능 | Short Circuit Protection, Overload Protection, Over-Temperature Protection |
Figure 7: A visual representation of the pump's key specifications, including model number, power, suction rate, noise level, weight, dimensions, and safety features.
9. 보증 및 지원
Specific warranty details and direct support contact information are not provided within this manual. For warranty claims, technical assistance, or any questions regarding your WEST TUNE Laboratory Vacuum Filtration Pump, please refer to the product packaging, your purchase documentation, or contact the seller directly through the platform where the product was purchased.
You may also visit the official WEST TUNE store for general information: WEST TUNE Store on Amazon.
