Imagebon 11.25인치 무선 Apple CarPlay 및 Android Auto 4K 블랙박스 사용 설명서

1. 서론

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Imagebon 11.25'' Wireless Apple CarPlay & Android Auto system. This device enhances your driving experience by integrating smartphone functionalities, advanced navigation, and dual-channel recording capabilities directly into your vehicle. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Imagebon 11.25'' Wireless Apple CarPlay & Android Auto Display
• Car Charger (Type-C power cord)
• 10m Reversing Camera with Extension Cable
• 접착 브라켓
• Long Arm Suction Cup Bracket
• AUX 케이블
• 사용자 설명서
• GPS 안테나 (특정 모델 변형에 포함된 경우)

Figure 1: Imagebon 11.25'' Display and all included accessories.

3. 설정 및 설치

3.1 디스플레이 장착

Choose between the adhesive bracket for a permanent dashboard mount or the long arm suction cup bracket for flexible positioning on the dashboard or windshield. Ensure the mounting surface is clean and dry before application.

1. Select your preferred mounting location, ensuring it does not obstruct your view 또는 운전 제어를 방해합니다.
2. Attach the chosen bracket to the back of the display unit.
3. Secure the display with the bracket to your chosen location. For adhesive mounts, press firmly for several seconds. For suction cup mounts, ensure the suction cup is clean and the lever is locked into place.

3.2 전원 연결

Connect the provided car charger to the Type-C port on the display unit and plug the other end into your vehicle's cigarette lighter socket. Ensure the charging head is at least 5V/3A for optimal performance. For first-time use, charge the device for at least 10 minutes non-stop.

3.3 후방카메라 설치

The rear camera provides a 1080P full HD view and is essential for the real-time reversing view 특징.

1. Mount the rear camera on the back of your car, typically near the license plate or above it.
2. Route the camera's extension cable from the rear of the car to the display unit, typically along the vehicle's headliner and A-pillar, tucking it under the trim for a clean installation.
3. Connect the red wire of the camera cable to the positive terminal of your vehicle's reversing light. This ensures the camera activates automatically when reversing.
4. Connect the two sockets of the rear camera's extension cable to the AV IN port on the display unit.

Figure 2: Illustration of the rear camera wiring and installation process.

4. 연결성

4.1 무선 Apple CarPlay 연결

Connect your iPhone wirelessly to access CarPlay features.

1. iPhone에서 다음으로 이동하세요. 설정 > 블루투스 and search for the device (e.g., "qckj_pnd_****").
2. 연결하려면 탭하세요.
3. Wait for a pop-up on your iPhone asking to "Use CarPlay with SmartScreen?". Select CarPlay 사용.
4. CarPlay will now be active on your Imagebon display.

Figure 3: Visual guide for Apple CarPlay connection.

4.2 무선 안드로이드 오토 연결

Connect your Android phone wirelessly to access Android Auto features.

1. On your Android phone, go to 설정 > 연결된 장치 > 블루투스 and search for the device (e.g., "qckj_pnd_****").
2. Tap to connect and wait for the "Bluetooth pairing" pop-up box.
3. 딸깍 하는 소리 쌍 and wait for the screen to cast.
4. Android Auto will now be active on your Imagebon display.

Figure 4: Visual guide for Android Auto connection.

4.3 Mirror Link (Airplay/Miracast)

The display supports wireless mirroring for both Android (Miracast) and iOS (Airplay) devices.

1. On your smartphone, enable Wi-Fi and connect to the display's Wi-Fi network (e.g., "qckj_pnd_****").
2. For iOS devices, open the Control Center and select 화면 미러링, then choose "SmartScreen".
3. For Android devices, access your phone's screen projection settings (often found under "More connections" or "Cast") and select the display's name.

Figure 5: Airplay connection steps for iOS devices.

Figure 6: Miracast connection steps for Android devices.

4.4 오디오 출력 모드

The device offers four audio output modes to integrate with your vehicle's sound system:

• 토종의: Audio plays directly from the display's internal speaker.
• 블루투스(BT): Connect the display to your car's Bluetooth system for audio output.
• FM: 두 장치를 동일한 주파수로 맞춰 차량의 FM 라디오로 오디오를 전송합니다.
• 보조: Use the provided AUX cable to connect the display to your car's AUX input.

그림 7: 이상view of available audio output options.

5. 대시캠 작동 방법

5.1 듀얼 대시캠 녹화

The device features a dual-lens dash cam system:

• 전면 카메라: Records in stunning 4K Ultra HD with a wide-angle lens.
• 후방 카메라: Captures in 1080P Full HD.

Both cameras record simultaneously, providing comprehensive coverage of your drive.

Figure 8: Dual dash cam capabilities with 4K front and 1080P rear recording.

5.2 루프 녹음

The dash cam supports loop recording, ensuring continuous capture of new footage. It supports up to 128GB storage for seamless loop recording. An SD card is not included and must be purchased separately.

Figure 9: Seamless loop recording functionality.

5.3 실시간 역추적 View

When the vehicle is put into reverse, the display automatically switches to the rear camera view, providing a wide 150° angle, adjustable reverse lines, and IP67 waterproof protection for enhanced safety during parking maneuvers.

그림 10: 실시간 반전 view 주차 보조 기능 포함.

5.4 뛰어난 야간 시야

The dash cam system is equipped with superior night vision capabilities, featuring 4K UHD for the front camera and an F1.8 aperture, ensuring clear recordings even in low-light conditions.

Figure 11: Superior night vision for clear recordings in low light.

6. 디스플레이 기능

6.1 11.25'' In-Cell Touch Panel

The display features a large 11.25-inch in-Cell touch panel with a 1920*720 resolution. In-Cell technology provides a simplified structure with an ultra-narrow bezel and slim thickness, offering rapid response and improved picture clarity compared to traditional On-Cell technology.

Figure 12: In-Cell Touch Panel Technology benefits.

6.2 Automatic Day/Night Brightness

The device automatically switches between day and night modes using built-in light sensors. You can also manually adjust screen brightness in the settings. The default daytime brightness is from 6 AM to 6 PM, with the remaining time defaulted to night brightness.

6.3 음성 제어

Utilize voice control features like Siri (for Apple CarPlay) or Google Assistant (for Android Auto) to manage calls, music, and navigation hands-free, enhancing driving safety.

그림 13: 음성 제어를 통한 핸즈프리 작동.

6.4 Multiple Split Screen Modes

The large 11.25-inch display supports multiple split-screen modes, allowing you to view navigation, music, and other applications simultaneously for enhanced multitasking while driving.

Figure 14: Multiple split screen modes for enhanced functionality.

7. 유지 및 관리

• 청소: Use a soft, dry cloth to clean the display. Avoid abrasive cleaners or solvents.
• 소프트웨어 업데이트: The device supports automatic Over-The-Air (OTA) updates to ensure optimal performance and access to the latest features. Ensure the device is connected to a stable Wi-Fi network for updates.
• 온도: 장치를 극한의 온도에 노출시키지 마십시오.

8. 문제 해결

• 전원 없음: Ensure the car charger is securely plugged into both the device and the cigarette lighter socket. Verify the vehicle's power outlet is functional.
• 연결 문제 (CarPlay/Android Auto): Ensure Bluetooth and Wi-Fi are enabled on your smartphone and the device. Try restarting both the device and your phone. Clear previous pairings and attempt to reconnect.
• 오디오 없음: Check the selected audio output mode (Native, BT, FM, AUX) and ensure your car's audio system is correctly configured for that input. Adjust volume levels on both the device and your car stereo.
• 블랙박스 녹화 안 됨: Ensure an SD card (up to 128GB) is inserted correctly. Check if loop recording is enabled in the settings.
• 화면 밝기: If screen brightness is not changing automatically, check the auto icon in the brightness settings. Manual adjustment is also available.

9. 사양

10. 보증 및 지원

For warranty information and technical support, please refer to the documentation included in your product packaging or visit the official Imagebon web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.