소개
Thank you for choosing the Brio 130SS Series Bottom Load Water Cooler Dispenser. This appliance provides convenient access to hot, room temperature, and cold water from 5-gallon bottles. Designed for ease of use and safety, it features a bottom-loading design to eliminate heavy lifting, a child safety lock for hot water, and an empty bottle alert system. Please read this manual thoroughly before installation and use to ensure proper operation and maintenance.
중요한 안전 정보
- 전기 안전: Always plug the dispenser into a grounded outlet. Do not use extension cords.
- 뜨거운 물 위험: The hot water dispenser can reach temperatures up to 194°F (90°C). Exercise extreme caution.
- 아동 안전: Always engage the child safety lock when dispensing hot water, especially in households with children.
- 놓기: Place the dispenser on a flat, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- 초기 설정 : After unpacking, allow the unit to stand upright for at least 24 hours before plugging it in and turning it on. This allows the compressor lubricants to settle.
- 상수도: Use only potable water in 5-gallon bottles. Do not operate the hot or cold water functions without a water bottle installed to prevent dry heating.
설정
- 포장 풀기 및 배치: Carefully remove the dispenser from its packaging. Place the unit on a firm, level floor surface. Ensure there is at least 4 inches of clearance from the back and sides of the unit to a wall for proper ventilation.
- 초기 대기 시간: Allow the water cooler to stand upright for a minimum of 24 hours before plugging it into an electrical outlet.
- 물병 설치:
Image: A person is shown easily sliding a 5-gallon water bottle into the bottom compartment of the water cooler, demonstrating the bottom-load design.
- 디스펜서의 아래쪽 캐비닛 문을 엽니다.
- Remove the cap from a new 5-gallon water bottle.
- Insert the probe assembly into the opening of the water bottle. Ensure the probe is fully inserted and the collar is securely seated on the bottle neck.
- Slide the water bottle into the bottom compartment and close the cabinet door.
- 전원 연결: Plug the power cord into a grounded 110-120V AC outlet.
- 초기 물 흐름: Before turning on the heating and cooling switches, dispense water from all three taps (hot, room, cold) until water flows steadily. This primes the system and prevents dry heating.
- Activate Heating and Cooling: Locate the heating and cooling switches on the back of the unit. Flip them to the 'ON' position. The indicator lights on the front panel will illuminate.
Image: A visual guide illustrating the simple three-step process of setting up and using the Brio water cooler.
작동 지침
The Brio 130SS dispenser offers three temperature options: hot, room, and cold water.
이미지: 상세 view of the control panel with LED indicators for hot, cold, and empty bottle, highlighting the child safety lock.
- 냉수 분배: Place your cup under the cold water tap. Press the cold water button (usually marked with a snowflake or blue indicator). Release the button when your cup is full.
- 실온의 물 제공: Place your cup under the room temperature water tap. Press the room temperature button (usually marked with a wave or green indicator). Release the button when your cup is full.
- Dispensing Hot Water (with Child Safety Lock):
Image: The dispenser's ample dispense height and deep drip tray are shown, accommodating various cup sizes.
- Place your cup under the hot water tap.
- To dispense hot water, simultaneously push the red child safety lock button inward and then press the hot water button (usually marked with steam or a red indicator).
- Release both buttons when your cup is full. The child safety lock will automatically re-engage.
- 빈 병 알림: The dispenser is equipped with an LED indicator light that illuminates when the 5-gallon water bottle is nearly empty, signaling that a replacement is needed.
유지
- 물받이 청소: The drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene. Simply slide out the drip tray, empty any collected water, wash with mild soap and water, rinse thoroughly, and replace.
- 외부 청소: 분배기의 외부 표면을 부드러운 천으로 닦으십시오.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 내부 청소/스케일 제거: Periodically, the internal water tanks may require cleaning or descaling. Refer to the full product manual for detailed instructions on this process, which typically involves using a food-grade cleaning solution.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물 분사 없음 | 물통이 비어 있거나 제대로 설치되지 않았습니다. | 물병을 교체하거나 프로브가 제대로 장착되었는지 확인하십시오. |
| 물이 충분히 뜨겁지 않거나 차갑지 않습니다 | Heating/cooling switch off; unit recently plugged in. | Ensure switches are ON. Allow 15-30 minutes for water to reach desired temperature. |
| Empty bottle alert not working | 센서 오작동. | Verify bottle is empty. If issue persists, contact customer support. |
| 물이 새다 | Water bottle cracked or probe not sealed correctly. | Check water bottle for damage. Re-seat the probe assembly. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Brio customer support.
명세서
Image: The Brio 130SS water cooler with key dimensions, highlighting its streamlined design and no-plumbing requirement.
- 모델 번호: CLBL130SS
- 색상: 스테인리스 스틸
- 재료: 검은색 플라스틱
- 용량: 5갤런 (3~5갤런 병과 호환 가능)
- 설치 유형: 바닥 장착
- 치수(대략): 44.3 x 15 x 14.3인치(패키지 크기)
- 품목 무게: 39.5파운드
- 힘: 110-120V AC
- 포함된 구성 요소: Water Cooler Dispenser, User Manual
보증 및 지원
This Brio water cooler dispenser comes with a manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Brio web대지.
For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Brio customer support. Contact information can typically be found on the product packaging, the official Brio website, or within the full user manual.
온라인 리소스: You may find additional support and FAQs on the Brio web대지: Visit the Brio Store