1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your AquaCal HeatWave SuperQuiet SQ140ARDSBPA Pool Heat Pump. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.
2. 안전 정보
중요 안전 지침:
- 설치 및 서비스는 자격을 갖춘 전문가가 수행해야 합니다.
- 모든 전기 연결이 해당 지역의 규정과 조례를 준수하는지 확인하세요.
- 서비스 또는 유지 보수 작업을 수행하기 전에 전원을 차단하십시오.
- 부품이 손상되었거나 누락된 경우 제품을 작동하지 마십시오.
- 작동 중에는 어린이와 애완동물이 기기에 접근하지 못하도록 하세요.
- Proper grounding is essential to prevent electrical shock.
경고: Risk of electrical shock. This unit operates on 230 Volts (AC). Improper installation or maintenance can result in serious injury or death.
3. 제품 오버view
The AquaCal HeatWave SuperQuiet SQ140ARDSBPA is a high-efficiency pool heat pump designed for both heating and cooling your pool water. It features a durable construction and advanced controls for optimal performance.
3.1 주요 특징
- Ultra-Efficient Heating & Cooling: Provides 114,000 BTU performance with a patented ThermoLink Titanium Heat Exchanger for maximum durability and energy efficiency.
- 속삭임처럼 조용한 작동: Powered by a scroll compressor and advanced microprocessor controls for reliable and near-silent operation.
- Corrosion-Proof Cabinet: Built to withstand harsh pool environments with a rugged, maintenance-free exterior.
- Flexible Plumbing & Electrical: Off-set plumbing design with 208-230V single phase operation and wide flow range (30-70 GPM).
3.2개의 구성요소
그림 1: 앞쪽 view of the AquaCal HeatWave SuperQuiet SQ140ARDSBPA heat pump. This image displays the main body of the unit, including the control panel at the top and the water inlet/outlet connections at the bottom right.
그림 2: Close-up of the control panel. This image highlights the digital display and control buttons used for setting temperature and operating modes.
- 제어판: Digital display and buttons for user interaction (see Figure 2).
- ThermoLink Titanium Heat Exchanger: Internal component responsible for heat transfer.
- Scroll Compressor: 효율적이고 조용한 작동을 제공합니다.
- Corrosion-Proof Cabinet: External housing protecting internal components.
- 물 유입/유출구: Connections for pool water circulation (see Figure 1).
- 팬 : 공기 순환을 위해 상단에 위치해 있습니다.
4. 설정 및 설치
Proper installation is crucial for the performance and longevity of your heat pump. Consult a qualified professional for installation.
4.1 Site Selection and Placement
- Choose a location with adequate airflow, ensuring at least 24 inches of clearance around the unit.
- 제품의 무게(약 304kg)를 지탱할 수 있는 단단하고 평평한 표면에 제품을 놓으십시오.
- Avoid placing the unit near windows or areas where noise might be a concern.
4.2 배관 연결
The unit features off-set plumbing connections. Connect the pool water return line to the unit's inlet and the heated/cooled water outlet to the pool return. Ensure a water flow rate between 30 and 70 Gallons Per Minute (GPM) for optimal operation.
4.3 전기 연결
- The unit requires a 230 Volts (AC), 1 Phase, 60Hz electrical supply.
- All wiring must be performed by a licensed electrician and conform to national and local electrical codes.
- Install a dedicated circuit breaker of appropriate amp분노.
- 장치의 적절한 접지를 확인하십시오.
5. 사용 설명서
Once installed and powered, the heat pump can be operated via its control panel.
5.1 제어판 기능
Refer to Figure 2 for the layout of the control panel. The panel typically includes:
- 디지털 디스플레이: Shows current water temperature, set temperature, and operating mode.
- 모드 버튼: Toggles between heating, cooling, and off modes.
- 위/아래 화살표: Adjust the desired set temperature.
- 입력/선택 버튼: 선택 사항을 확인합니다.
5.2 원하는 온도 설정
- 를 누르세요 방법 버튼을 클릭하여 선택하세요 난방 or 냉각.
- 사용하세요 Up or 아래에 arrow buttons to adjust the desired pool water temperature.
- The unit will automatically begin heating or cooling to reach the set temperature, provided the pool pump is running and water flow is detected.
5.3 초기 시작
Upon initial startup, allow the unit to run for several hours to stabilize the pool water temperature. The time required will vary based on pool size and ambient conditions.
6. 유지관리
Regular maintenance ensures efficient operation and extends the life of your heat pump.
6.1 정기 청소
- Keep the area around the heat pump clear of debris, leaves, and vegetation to ensure proper airflow.
- Periodically clean the exterior cabinet with a mild detergent and water.
- Inspect the fan blades and coils for any obstructions or buildup. Gently clean with a soft brush or vacuum if necessary.
6.2 방한처리
In regions where temperatures drop below freezing, proper winterization is essential to prevent damage:
- Turn off the heat pump and disconnect its electrical power.
- Drain all water from the heat pump's plumbing lines and heat exchanger.
- Cover the unit with a breathable, protective cover to shield it from harsh weather.
7. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제에 대해 설명합니다. 복잡한 문제의 경우 자격을 갖춘 서비스 기술자에게 문의하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다 | No power supply; tripped breaker; control panel error | Check electrical connections and circuit breaker. Consult manual for control panel error codes. |
| 난방/냉방이 부족합니다 | Low water flow; dirty coils; incorrect temperature setting; ambient temperature too low/high | Ensure pool pump is running and filter is clean. Clean coils. Verify set temperature. |
| 비정상적인 소음 | Debris in fan; loose components; compressor issue | Inspect fan for obstructions. Tighten any loose parts. If compressor noise, contact service. |
| 물 누출 | Loose plumbing connections; damaged heat exchanger | Check and tighten all plumbing connections. If leak persists, contact service. |
8. 사양
Technical specifications for the AquaCal HeatWave SuperQuiet SQ140ARDSBPA:
- 모델: SQ140ARDSBPA
- 상표: 아쿠아칼
- BTU 출력 : 114,000 BTU (under optimal conditions)
- 전원: 전기 같은
- 권tage: 230볼트(AC)
- 단계: 1단계
- 빈도: 60Hz
- 최대 유량 : 분당 70 갤런
- Minimum Flow Rate: 분당 30 갤런
- 품목 무게: 304 파운드
- 제품 크기: 34 x 34 x 40 인치
- 색상: 검은색
- 한국어: 690449058405
9. 보증 및 지원
The AquaCal HeatWave SuperQuiet SQ140ARDSBPA is backed by strong factory support and a comprehensive warranty program. For specific warranty details, please refer to the warranty card included with your product or visit the official AquaCal web대지.
For authorized factory service or technical support, please contact AquaCal directly:
고객 지원: 800-878-0998