1. 중요한 안전 정보
조립 및 사용 전에 모든 지침을 주의 깊게 읽으십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
- 중량 용량: 각 침대의 권장 무게 제한을 초과하지 마십시오.
- 안전 난간: Ensure all guardrails are securely in place on the upper bunk.
- 매트리스 크기: Use only mattresses of the specified size to prevent gaps.
- 집회: Two adults are recommended for assembly. Do not use power tools unless specified.
- 통풍: Ensure adequate ventilation around the bed, especially when using LED lights.
- 어린이들: 6세 미만의 어린이는 위쪽 침대를 사용해서는 안 됩니다.
- 추락 위험: Do not allow horseplay on or under the bed. Always use the ladder for access to the upper bunk.
- 유지: Regularly check all connections and tighten hardware as needed.
2. 패키지 내용
Verify all components are present before beginning assembly. Refer to the included parts list for detailed identification.
- Metal Frame Components (Numbered)
- 하드웨어 세트 (나사, 볼트, 와셔, 육각 렌치)
- 책상 표면
- Bookshelf Panels
- LED 조명 스트립
- USB Charging Ports Unit
- 사용 설명서
3. 설치 및 조립 지침
Follow these steps carefully for proper assembly. Two adults are recommended for this process.
- 짐을 풀고 식별하세요: Lay out all components on a clean, soft surface (e.g., carpet) to prevent scratches. Match each part to the numbered diagram in the separate assembly guide.
- 베이스 프레임 조립: Begin by connecting the main support beams for the lower and upper bunks. Ensure all connections are finger-tightened initially.
- Install Ladder and Guardrails: Securely attach the ladder and all guardrails to the upper bunk frame. Double-check that these are firmly fastened for safety.
- Attach Desk and Bookshelves: Mount the desk surface and bookshelf panels to the designated frame sections. Ensure they are level and stable.
- Integrate LED Lights and USB Ports: Carefully install the LED light strip and USB charging unit into their respective slots on the desk or frame. Connect power as instructed.
- 최종 조임: 모든 부품이 제자리에 설치되면 제공된 공구를 사용하여 모든 나사와 볼트를 순서대로 조이십시오. 너무 세게 조이지 마십시오.
- 안전 점검: Before use, gently shake the assembled bed to ensure stability. Re-tighten any loose connections.
이미지: 폭발된 view diagram showing the various components of the Polibi Queen Over Twin XL Metal Bunk Bed, illustrating how they fit together during assembly.
Image: A fully assembled Polibi Queen Over Twin XL Metal Bunk Bed with the lower bed configured as an L-shaped sofa, featuring a desk with shelves and a laptop.
4. 사용 설명서
4.1 Convertible Design (Bed to Sofa)
The lower bed features a convertible design, allowing it to function as a twin XL bed, an L-shaped sofa, or a folded sofa for space-saving.
- To Convert to L-shaped Sofa: Gently pull the lower bed frame outwards from the main structure. The bed base will pivot to form an L-shape with the main frame. Ensure it locks securely into position.
- To Convert to Sofa: Fold the lower bed base inward towards the main frame. The mattress platform will fold, creating a sofa seating area.
- To Convert to Twin XL Bed: Extend the lower bed frame fully outwards until it forms a flat sleeping surface. Ensure all support legs are engaged.
Video: Demonstration of the Polibi Bunk Bed converting from a bed configuration to an L-shaped sofa and then to a compact sofa, highlighting its versatile design.
4.2 LED Lighting and USB Ports
The integrated desk features LED lighting and USB charging ports for convenience.
- LED 조명: Connect the LED light strip to a power source. Use the inline switch or remote (if included) to turn the lights on/off and adjust brightness/color (if applicable).
- USB 포트: Plug the USB charging unit into a standard wall outlet. Connect your devices to the USB ports for charging.
이미지: 클로즈업 view of the integrated USB charging ports and standard power outlets located on the desk surface of the Polibi Bunk Bed, ready for device connection.
5. 유지관리
- 청소: 부드러운 천으로 금속 표면을 닦으세요.amp 천으로 닦으세요. 연마성 세제나 강한 화학 물질은 피하세요.
- 하드웨어 검사: Periodically inspect all bolts, screws, and connections. Tighten any loose hardware to ensure structural integrity and safety.
- 매트리스 관리: 매트리스 관리 시에는 제조업체의 지침을 따르십시오.
- 전기 부품: Ensure LED lights and USB ports are free from dust and debris. Do not attempt to repair electrical components yourself.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 침대를 조립하고 나니 흔들거리는 느낌이 듭니다. | 느슨한 하드웨어. | Re-check and tighten all bolts and screws. Ensure all parts are correctly aligned. |
| LED 조명이 작동하지 않습니다. | Not plugged in; faulty connection; damaged strip. | Ensure power adapter is securely plugged into an outlet and the light strip. Check for any visible damage to the strip or wiring. Contact support if issues persist. |
| USB 포트로 기기를 충전할 수 없습니다. | Power not connected; device incompatibility; faulty port. | Verify the USB unit is powered. Try a different USB cable or device. If still not working, contact support. |
| Lower bed conversion mechanism is stiff. | Friction; misalignment. | Ensure no obstructions. Apply a small amount of silicone lubricant to moving parts if necessary. Check for proper alignment of the pivoting sections. |
7. 사양
- 모델: Polibi Queen Over Twin XL Metal Bunk Bed with Desk & Sofa
- ASIN: B0F6V3JWHR
- 재료: Heavy-gauge Steel Frame
- 색상: 검은색
- 전체 치수(L x W x H): 83.5인치 x 63인치 x 68.7인치
- Upper Bunk Mattress Compatibility: 여왕
- Lower Bunk Mattress Compatibility: 트윈 XL
- 특별 기능: 3-in-1 Convertible Design (Bunk Bed, L-shaped Sofa, Sofa), Integrated Desk, Bookshelves, LED Lights, USB Charging Ports, Safety Guardrails.
- 인증: CPC Certified (as per product description)
- 필요한 조립: 예 (도구 포함)
Image: A technical diagram illustrating the precise dimensions in inches of the Polibi Queen Over Twin XL Metal Bunk Bed, including height, length, and width of various sections.
8. 보증 및 지원
For warranty information, product support, or to order replacement parts, please contact Polibi customer service.
- 고객 서비스: Refer to your purchase documentation or the Polibi official web연락처 정보 사이트.
- 온라인 리소스: 방문하세요 Polibi Store on Amazon 추가 제품 정보 및 지원은 여기를 참조하세요.
- 구매 증빙: Keep your receipt or proof of purchase for warranty claims.
