YuanLey 10 Port 2.5G PoE Switch Unmanaged User Manual

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your YuanLey 10 Port 2.5G PoE Unmanaged Switch. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

2. 안전 정보

기기 손상을 방지하고 사용자의 안전을 확보하기 위해 다음 안전 수칙을 준수하십시오.

• 전원 공급 장치 볼륨을 확인하십시오.tage is within the specified range (AC 100-240V, 50-60Hz).
• 장치를 열지 마십시오.asing. 모든 서비스는 자격을 갖춘 담당자에게 의뢰하세요.
• Avoid placing the switch in areas with high humidity, extreme temperatures, or direct sunlight.
• Ensure proper ventilation to prevent overheating. The fanless design relies on ambient airflow.
• 제공된 전원 코드와 액세서리만 사용하세요.
• 기기를 청소하거나 옮기기 전에 전원을 분리하세요.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1x YuanLey 10 Port 2.5G PoE Unmanaged Switch
• 1x 전원
• 1x 사용자 설명서
• 1x Rackmount Kit

Image: The YuanLey 10 Port 2.5G PoE Switch and its retail packaging, illustrating the product and its box.

4. 제품 오버view

The YuanLey 10 Port 2.5G PoE Unmanaged Switch is designed to provide high-speed network connectivity with Power over Ethernet capabilities. It features 8x 2.5G Base-T PoE ports and 2x 10G SFP+ ports for flexible network expansion.

4.1 전면 패널

이미지: 상세 view of the switch's front and back panels, highlighting the 2.5G PoE ports, 10G SFP+ ports, power input, and VLAN switch.

• PoE 포트(1-8): 2.5 Gigabit Ethernet ports supporting IEEE 802.3af/at PoE. Each port can deliver up to 30W, with a total PoE budget of 120W. These ports are compatible with 10/100/1000Mbps and 2.5Gbps devices.
• 10G SFP+ 포트(9-10): Two 10 Gigabit SFP+ slots for fiber optic connections, compatible with 1G/2.5G/10G SFP modules (modules not included).
• LED 표시등:
  • PWR(전원): Green indicates power on.
  • PoE Link/Act: Orange for 2.5Gbps link, Green for 10/100/1000Mbps link. Flashing indicates data activity.
  • SFP 지표: Green indicates link connection.
• S&V Dip Switch: Toggles between Standard Mode and VLAN Mode.

4.2 후면 패널

• AC 전원 입력: Standard AC 100-240V, 50-60Hz input.
• 접지 단자: 전기적 안전을 보장하기 위해 접지선을 연결합니다.

5. 설정

The YuanLey 10 Port 2.5G PoE Switch is a plug-and-play device, requiring no complex configuration for basic operation.

5.1 물리적 설치

1. 놓기: Place the switch on a stable, flat surface or mount it in a 19-inch rack using the provided rackmount kit. Ensure adequate space around the device for ventilation.
2. 전원 연결: Connect the provided power cord to the AC power input on the rear panel of the switch and then to a suitable power outlet. The PWR LED will illuminate green.

Image: A visual guide to the simple plug-and-play setup process, showing power connection and device connections.

5.2 네트워크 연결

1. PoE를 지원하지 않는 장치 연결하기: Connect your non-PoE network devices (e.g., computers, NAS, routers) to any of the 2.5G Base-T ports (1-8) using standard Ethernet cables.
2. PoE 장치 연결하기: Connect your PoE-compatible devices (e.g., IP cameras, wireless access points, IP phones) to any of the 2.5G Base-T PoE ports (1-8). The switch will automatically detect and provide power to these devices.
3. 업링크 연결: For connecting to your main network or another switch, use one of the 10G SFP+ ports (9-10) with an appropriate SFP module and fiber optic cable, or use a standard Ethernet port if fiber is not required.

Image: An illustration demonstrating how to connect both PoE and non-PoE devices to the switch for a comprehensive network setup.

6. 사용 설명서

The switch operates automatically once connected. No software configuration is typically required for an unmanaged switch.

6.1 표준 모드

In Standard Mode, all ports communicate freely with each other. This is the default mode for general network use.

6.2 VLAN Mode (One-Key VLAN)

To enhance network security and reduce broadcast storms, you can enable VLAN Mode using the S&V Dip Switch. In VLAN Mode, ports 1-8 are isolated from each other but can communicate with the SFP+ uplink ports (9-10). This prevents direct communication between connected devices on ports 1-8, routing all traffic through the uplink ports.

Image: A visual explanation of the One-Key VLAN feature, demonstrating how ports are isolated while maintaining uplink connectivity.

7. 유지관리

• 청소: 부드럽고 마른 천으로 스위치 외부를 닦으세요. 액체나 에어로졸 세척제는 사용하지 마세요.
• 통풍: Regularly check that the cooling vents are not obstructed to ensure proper heat dissipation.
• 펌웨어: As an unmanaged switch, firmware updates are generally not required or available.

8. 문제 해결

스위치 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 전원 없음:
  • 전원 코드가 스위치와 작동하는 콘센트에 제대로 연결되어 있는지 확인하십시오.
  • 다른 장치를 연결해 전원 콘센트가 작동하는지 확인하세요.
• 포트에 링크/활동이 없습니다.
  • Verify that the Ethernet cable is properly connected at both ends.
  • 다른 이더넷 케이블을 사용해 보세요.
  • 연결된 장치의 전원이 켜져 있고 올바르게 작동하는지 확인하세요.
  • Check the LED indicator for the port; if it's off, there might be no link.
• PoE 장치가 전원을 공급받지 못하고 있습니다:
  • Confirm that the connected device is IEEE 802.3af/at compliant.
  • Check the total PoE power budget (120W) and individual port power limit (30W) to ensure it's not exceeded.
  • PoE 장치를 다른 PoE 포트에 연결해 보세요.
• 네트워크 속도가 느립니다:
  • Ensure you are using Cat5e or higher-rated Ethernet cables for 2.5G speeds.
  • Verify that your connected devices (NICs, routers) support 2.5G Ethernet.
  • 네트워크 혼잡이나 상당한 대역폭을 소모하는 다른 장치가 있는지 확인하세요.

9. 사양

10. 보증 및 지원

For warranty information and technical support, please refer to the official YuanLey web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.