1. 서론
Thank you for choosing the Sudokoo SK700 AM5 Air Cooler. This high-performance single-tower CPU cooler is designed exclusively for AMD AM5 sockets, featuring seven heatpipes and a 120mm FDB PWM quiet fan to ensure efficient and silent cooling for your system. This manual provides essential information for proper installation, operation, and maintenance of your cooler.
Figure 1.1: Sudokoo SK700 AM5 Air Cooler
2. 안전 정보
- 설치나 유지관리를 하기 전에는 항상 컴퓨터의 전원을 분리하세요.
- 손상을 방지하기 위해 구성품을 조심스럽게 다루십시오.
- Wear anti-static gloves to prevent electrostatic discharge (ESD) damage to sensitive components.
- Ensure proper ventilation in your PC case for optimal cooling performance.
- This cooler is mechanically incompatible with the MSI MAG B850M Mortar (WIFI) motherboard. Verify motherboard compatibility before installation.
3. 상자 안에 무엇이 들어있나요?
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- CPU Air Cooler (Heatsink with pre-installed fan)
- AMD AM5 Brackets
- 열전도 페이스트
- 사용 설명서
- Mounting Accessories (screws, spacers, etc.)
4. 사양
| 특징 | 사양 |
|---|---|
| 제품 크기(L x W x H) | 5.75" x 3.82" x 6.46"(146mm x 97mm x 164mm) |
| 상표 | 수도쿠 |
| 전원 커넥터 유형 | 4 핀 PWM |
| 권tage | 12 볼트 |
| 왓tage | 3 와트 |
| 냉각 방식 | 공기 |
| 호환 장치 | AMD AM5 CPUs |
| 소음 수준 | 32.5데시벨(최대) |
| 최대 회전 속도 | 2200 RPM |
| 기류 용량 | 66.29 분당 입방피트(CFM) |
| 히트파이프 | 7 |
| 열전도율 | 220와트 |
Figure 4.1: Sudokoo SK700 AM5 Air Cooler Dimensions
5. 설치 가이드
Follow these steps for installing your Sudokoo SK700 AM5 Air Cooler:
- 마더보드 준비: Ensure your motherboard is placed horizontally. Remove the original CPU retention mechanism from your AM5 motherboard.
- Install Anti-Bend Bracket: Replace the original Integrated Loading Mechanism (ILM) on your motherboard with the exclusive AM5 CPU anti-bend bracket provided. This anodized and sandblasted bracket is designed to accurately fit the AM5 CPU socket size, minimizing contact between thermal grease and CPU capacitors, providing double protection.
- 열 페이스트 적용: Apply a small amount of the included thermal paste to the center of your CPU's Integrated Heat Spreader (IHS).
- 방열판 장착: Position the heatsink onto the CPU, aligning it with the mounting points on the anti-bend bracket. Secure the heatsink using the provided screws.
- 팬 부착: The SK700 features an L-Rail Lock Mount design for effortless installation. Slide the 120mm FDB PWM fan onto the heatsink rails until it clicks securely into place. This tool-free method allows for easy fan removal and maintenance.
- 팬 케이블을 연결하세요: 4핀 PWM 팬 케이블을 마더보드의 CPU_FAN 헤더에 연결하십시오.
- Verify RAM Clearance: The angled offset heatpipe design ensures full RAM clearance, allowing unobstructed access to your RAM slots and compatibility with tall heat spreaders.
Figure 5.1: AM5 CPU Anti-Bend Bracket
Figure 5.2: Cooler Base with 7 Heatpipes
Figure 5.3: L-Rail Lock Mount Design for Fan Installation
Figure 5.4: Full RAM Clearance with SK700 Cooler
설치 비디오 가이드
Video 5.1: Sudokoo SK700/SK700V AM5 CPU Air Cooler Installation Overview. This video demonstrates the installation process for the SK700 series, including the anti-bend bracket and fan mounting.
6. 사용 설명서
The Sudokoo SK700 AM5 Air Cooler is designed for optimal performance and quiet operation.
- PWM 팬 제어: The 120mm FDB PWM fan operates with adjustable speeds from 500 to 2200 RPM (±10%). Your motherboard's BIOS or fan control software can manage these speeds based on CPU temperature, ensuring an ideal balance of cooling and silence.
- 0RPM 모드: The fan supports a 0 RPM mode under 5% PWM load, utilizing Intelligent Start Stop Tech (ISST). This feature ensures zero noise during low-load scenarios, contributing to environmental protection and energy saving while extending the device's lifespan.
- Efficient Heat Flow: The enclosed single-tower heatsink design, combined with seven heat pipes, ensures ultimate cooling performance with superb quietness of operation.
Figure 6.1: SK700 Fan and Heatsink Design
7. 유지관리
정기적인 유지관리는 CPU 쿨러의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.
- 먼지 제거: Periodically clean the fan blades and heatsink fins to remove accumulated dust. Use compressed air or a soft brush. Ensure the fan is not spinning during cleaning.
- Fan Removal: The L-Rail Lock Mount allows for easy, tool-free removal of the fan for thorough cleaning. Simply slide the fan off the heatsink.
- 열전도 페이스트: Reapply thermal paste every 2-3 years, or if you remove the cooler for any reason, to maintain efficient heat transfer.
8. 문제 해결
If you encounter issues with your Sudokoo SK700 AM5 Air Cooler, refer to the following common solutions:
- 높은 CPU 온도:
- 쿨러가 단단히 고정되어 CPU와 완전히 접촉하는지 확인하십시오.
- 써멀 페이스트가 올바르고 고르게 도포되었는지 확인하십시오.
- 방열판과 팬에 먼지가 쌓였는지 확인하고 필요하면 청소하십시오.
- Confirm that the fan is spinning and connected to the CPU_FAN header.
- PC 케이스 내부에 적절한 공기 흐름이 유지되도록 하십시오.
- 팬이 회전하지 않음:
- 메인보드의 CPU_FAN 헤더에 4핀 PWM 케이블이 제대로 연결되어 있는지 확인하십시오.
- Verify fan settings in your motherboard's BIOS/UEFI. The 0 RPM mode activates under low load, so the fan may not spin if the CPU is idle.
- Inspect the fan for any obstructions.
- 과도한 팬 소음:
- Check for loose fan mounting or vibrations.
- Clean the fan blades to remove any debris that might cause imbalance.
- 메인보드 BIOS/UEFI에서 팬 속도 곡선을 조정하여 더욱 조용한 환경을 만드세요.file 기온이 허락한다면.
9. 보증 및 지원
The Sudokoo SK700 AM5 Air Cooler comes with a 5년 보증 구매일로부터 정상적인 사용 중에 발생한 제조상의 결함 및 오작동을 보장합니다.
For technical support, warranty claims, or further assistance, please visit the official Sudokoo web해당 웹사이트를 방문하거나 판매점에 문의하십시오. 보증 적용을 위해 구매 증빙 자료를 보관하십시오.
공식 제품 페이지: Sudokoo SK700 AM5 Product Overview
