1. 서론
This manual provides essential instructions for the safe and effective use, installation, operation, and maintenance of your CHBMSS Half Steel Pressure Gauge, model EN 837-1 213.53.100. Please read this manual thoroughly before using the device and retain it for future reference.
그림 1: 전면 view of the CHBMSS Half Steel Pressure Gauge.
2. 안전 정보
부상 및 기기 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- Always ensure the pressure gauge is installed by qualified personnel.
- 압력계의 최대 정격 압력을 초과하지 마십시오.
- Verify compatibility of the gauge material with the measured medium.
- Protect the gauge from excessive vibration, shock, and extreme temperatures.
- Regularly inspect the gauge for any signs of damage or wear.
3. 제품 특징
- Standard Interface Design: Ensures broad compatibility with various systems.
- 고정밀 측정: Utilizes digital circuitry and high-precision pressure sensors for accurate pressure and vacuum readings.
- 실시간 데이터: Capable of real-time testing of pressure and relative temperature, aiding in systematic installation or maintenance based on standard pressure and temperature relationships.
4. 사양
| 기인하다 | 값 |
|---|---|
| 모델 번호 | EN 837-1 213.53.100년 |
| 다이얼 크기 | 100mm (XNUMXmm) |
| 압력 범위 | -1 to 0 bar / -0.1 to 0 MPa |
| 품목 무게 | 500그램(1.1파운드) |
| 패키지 크기 | 1.18 x 0.79 x 0.39 인치 |
| 제조업체 | CHBMSS |
| ASIN | B0F3C87G2K |
5. 설정 및 설치
Proper installation is crucial for accurate readings and device longevity. Follow these general guidelines:
- 위치 선택: Choose a location free from excessive vibration, direct heat, and corrosive environments.
- 설치: Securely mount the gauge using appropriate fittings. Ensure the gauge face is easily visible.
- 연결: Connect the gauge to the pressure source using compatible and properly sealed fittings. Avoid overtightening.
- 누출 확인: After installation, slowly apply pressure and check all connections for leaks using a suitable leak detection method.
그림 2: 측면 view showing the gauge's connection point.
6. 사용 설명서
The CHBMSS Half Steel Pressure Gauge is designed for straightforward operation:
- 게이지 읽기: The gauge displays pressure in both bar and MPa. The inner scale typically indicates MPa, and the outer scale indicates bar. Read the value indicated by the needle.
- 진공 측정: For vacuum applications, the needle will move into the negative range, indicating vacuum pressure.
- 환경 고려 사항: Ensure the operating environment is within the specified temperature and humidity ranges for optimal performance.
7. 유지관리
Regular maintenance ensures the accuracy and longevity of your pressure gauge:
- 청소: Clean the gauge face and casing는 부드러운 d로 발음합니다.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 점검: Periodically check for any physical damage, such as cracks in the casing or bent needles. Ensure the connection remains secure and free of leaks.
- 구경 측정: For critical applications, periodic calibration by a certified technician is recommended to maintain accuracy.
그림 3: 뒤로 view of the pressure gauge.
8. 문제 해결
If you encounter issues with your pressure gauge, consider the following:
- 읽지 않음/잘못 읽음:
- Check for blockages in the pressure line.
- Verify the gauge is correctly connected and sealed.
- Ensure the pressure source is active.
- Fluctuating Needle:
- This may indicate pressure pulsations in the system. Consider installing a snubber or damp에너.
- Check for excessive vibration at the mounting point.
- 연결 부위 누출:
- Tighten connections appropriately.
- Replace seals or thread tape if necessary.
9. 보증 및 지원
This CHBMSS product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the CHBMSS customer service department. Contact information can typically be found on the product packaging or the official CHBMSS web대지.
