1. 서론
This manual provides instructions for the safe and effective use of the KAIWEETS KC604 Digital Clamp Meter Multimeter and the KET12 Soft Silicone Electrician Test Leads Kit. Please read this manual thoroughly before operation and retain it for future reference. This kit is designed for professional and DIY electrical testing, offering a range of measurement capabilities for various applications.
2. 안전 정보
Always adhere to safety precautions when using electrical testing equipment. Failure to do so may result in injury or damage to the device. This device is designed for safe operation when used according to these instructions.
- Do not exceed the maximum input values for any function. The KC604 is rated for CAT III 1000V and CAT IV 600V.
- 측정하기 전에 테스트 리드가 제대로 연결되어 있고 기능 스위치가 올바른 범위로 설정되어 있는지 확인하십시오.
- Always use appropriate personal protective equipment (PPE) such as safety glasses and insulated gloves when working with electrical circuits.
- Inspect test leads for damage before each use. Do not use if insulation is compromised or if there are any signs of wear.
- Avoid touching exposed conductors or circuit components when power is applied.
- 계량기가 손상된 것처럼 보이거나 제대로 작동하지 않는 경우 작동하지 마십시오.
- 배터리 부족 표시등이 켜지면 정확한 측정값과 기기의 정상적인 작동을 위해 즉시 배터리를 교체하십시오.
- Never attempt to measure current on a circuit with the test leads; use the clamp function for current measurements.
Image: An electrician safely using the KAIWEETS KC604 Digital Clamp Meter to perform measurements within an electrical panel, highlighting its application in a professional setting.
3. 제품 오버view
3.1 KAIWEETS KC604 Digital Clamp 미터
The KAIWEETS KC604 is a versatile digital clamp 교류/직류 전류 및 교류/직류 전압 측정을 위해 설계된 계측기tage, resistance, continuity, diode, capacitance, frequency, and temperature. It features a D-shaped jaw for clamping around conductors and a clear digital display with backlight and flashlight functions for improved visibility in various environments.
Image: The KAIWEETS KC604 Digital Clamp 미터, 표시asing its main components including the clamp jaw, function dial, and LCD display.
3.2 KAIWEETS KET12 Soft Silicone Electrician Test Leads Kit
The KET12 kit provides high-quality, flexible silicone test leads with interchangeable connectors, including alligator clips, needle probes, and mini-hooks, for various testing applications. These leads are double-insulated, rated for CAT III 1000V & CAT IV 600V, and can handle a 10A current, ensuring safety and versatility.
Image: Components of the KET12 Test Leads Kit, including two alligator clips, two test probes, two test hooks, and a test lead with an SMD tweezer, demonstrating the interchangeable nature of the connectors.
4. 설정
4.1 배터리 설치
The KC604 requires batteries for operation. To install or replace batteries, locate the battery compartment on the back of the device. Use a screwdriver to open the compartment, insert the batteries according to the polarity markings, and then securely close the compartment. Refer to the device markings for the correct battery type (e.g., AAA or 9V).
4.2 테스트 리드 연결
대부분의 볼륨의 경우tage, resistance, continuity, diode, capacitance, and frequency measurements, insert the red test lead into the "VΩmA" input jack and the black test lead into the "COM" input jack. Ensure the connections are firm. For current measurements using the clamp function, test leads are not required for the main current path.
Image: An illustration showing test leads properly connected to a multimeter's input jacks, demonstrating the correct setup for various electrical measurements.
5. 사용 설명서
5.1 전원 켜기/끄기
Rotate the function dial from the "OFF" position to any desired measurement function to power on the device. To power off, rotate the function dial back to "OFF". The device features an auto-shutdown function after a period of inactivity to conserve battery life.
5.2 교류/직류 전류 측정 (Cl)amp 함수)
Rotate the function dial to the appropriate AC or DC current range (e.g., 40A, 400A). Open the clamp jaw and carefully enclose a single conductor. Ensure the jaw is fully closed. The current value will be displayed on the LCD. Do not clamp 여러 도체 주변에서 측정하면 부정확한 측정값이 나올 수 있으므로 주의해야 합니다.
Image: The KAIWEETS KC604 clamp meter actively measuring AC/DC current by securely clamping around a single electrical wire, displaying the reading on its screen.
5.3 AC/DC Vol 측정tage
Rotate the function dial to the AC V or DC V range. Connect the red and black test leads in parallel to the circuit or component where voltage is to be measured. The voltage value will be displayed on the LCD. Always ensure the correct voltage type (AC or DC) is selected.
Image: The KAIWEETS KC604 clamp meter measuring AC/DC voltage using its connected test leads, with the voltage reading visible on the display.
5.4 온도 측정
Rotate the function dial to the temperature function (°C/°F). Connect the temperature probe (typically a K-type thermocouple, if included) to the meter's input jacks. Place the tip of the probe on the object whose temperature is to be measured. The temperature will be displayed in Celsius or Fahrenheit.
Image: The KAIWEETS KC604 clamp meter measuring temperature using a connected temperature probe, showing the temperature reading on its display.
5.5 Other Functions (Resistance, Continuity, Diode, Capacitance, Frequency)
For these functions, rotate the function dial to the corresponding symbol. Connect the test leads to the appropriate input jacks and across the component or circuit being tested. Always ensure the circuit is de-energized before measuring resistance, continuity, diode, or capacitance.
- 저항(Ω): 전기 저항을 옴(Ω) 단위로 측정합니다.
- Continuity (Buzzer): Indicates a complete circuit with an audible tone and low resistance reading.
- Diode (►|--): Tests diode functionality and forward voltag전자 드롭.
- 정전용량(F): 정전 용량을 패럿(Farad) 단위로 측정합니다.
- 주파수(Hz%): AC 신호의 주파수를 측정합니다.
5.6 MAX/MIN and HOLD Functions
그만큼 최대/최소 button allows the meter to capture and display the maximum and minimum readings during a measurement session. Pressing it cycles through MAX, MIN, and current readings. The 잡고 있다 button freezes the current reading on the display, which is useful for recording measurements in hard-to-reach areas.
6. 유지관리
6.1 청소
계량기와 테스트 리드를 물로 닦으십시오.amp cloth and mild detergent. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing or display. Ensure the device is powered off and disconnected from any circuits before cleaning.
6.2 배터리 교체
When the low battery indicator appears on the display, replace the batteries immediately to ensure accurate readings and proper device functionality. Refer to the battery compartment cover for the correct battery type and ensure proper polarity during installation.
6.3 테스트 리드 관리
Store test leads properly to prevent kinking, sharp bends, or damage to the insulation. Regularly inspect the test leads for any cuts, cracks, or other signs of wear. Damaged test leads should be replaced immediately to maintain safety and measurement accuracy.
이미지: 클로즈업 view of the flexible, double-insulated silicone test leads, emphasizing their durable and soft construction for long-lasting use.
7. 문제 해결
7.1 일반적인 문제 및 해결 방법
- 디스플레이/전원 없음: Check battery installation and charge. Ensure the function dial is not on the "OFF" position. Replace batteries if necessary.
- 부정확한 판독: Verify correct function selection and test lead connection. Check for damaged test leads. Ensure the clamp jaw is fully closed around a single conductor for current measurements. Ensure the circuit is de-energized for resistance/continuity tests.
- 연속성 비프음 없음: Ensure the circuit is de-energized. Check for open circuits or high resistance in the component being tested.
- 디스플레이에 "OL"(과부하)이 표시됩니다. The measured value exceeds the selected range. Select a higher range or ensure the input is within the device's specifications.
8. 사양
8.1 KAIWEETS KC604 Digital Clamp 미터
- 안전 등급: CAT III 1000V, CAT IV 600V
- 표시하다: 4000 카운트 디지털 디스플레이
- AC/DC Current Range: Up to 400A (via clamp)
- AC/DC 볼륨tag전자 범위: 최대 1000V
- 온도 범위: -4°F ~ 1832°F(-20°C ~ 1000°C)
- 특징: Auto-shutdown, Backlight, Flashlight, Low battery indication, NCV (Non-Contact Voltage) detection, MAX/MIN, HOLD functions.
8.2 KAIWEETS KET12 Test Leads Kit
- 안전 등급: CAT III 1000V, CAT IV 600V
- 현재 평가: 10A
- 재료: Soft Silicone Double Insulated
- 와이어 길이: 약 48cm(122인치)
- 와이어 코어: Composed of 105pcs 0.001mm copper wires and nylon yarn for excellent tensile strength and low resistance.
- 커넥터: Interchangeable alligator clips, needle probes, and mini-hooks.
9. 보증 및 지원
9.1 보증 정보
KAIWEETS provides a 36-month after-sale service for this product. This warranty covers manufacturing defects and ensures the product meets its specified performance. Please retain your proof of purchase for warranty claims.
9.2 연락처 정보
For warranty claims, technical support, or any inquiries regarding the KAIWEETS KC604 Digital Clamp Meter and KET12 Test Leads Kit, please contact KAIWEETS customer service through their official website or the retailer where the product was purchased. Detailed contact information can typically be found in your product packaging or on the KAIWEETS official support page.
