MINISFORUM 790S7 미니 PC 사용자 설명서

1. 서론

This manual provides essential instructions for setting up, operating, maintaining, and troubleshooting your MINISFORUM 790S7 Mini PC. The 790S7 is a barebone mini PC featuring an AMD Ryzen 9 7940HX processor, designed for users who wish to customize their memory, storage, and graphics card.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1x MINISFORUM 790S7 PC (BD790i SE Motherboard + Case)
• 1x 전원
• 1x 사용자 매뉴얼(이 문서)

Note: The barebone version does not include a WiFi card, SSD cooler, or dedicated RTX 4060 Graphics.

이미지: 이상view of the MINISFORUM 790S7 Mini PC and its core features.

2. 설정 가이드

2.1 풀기 및 준비

Carefully remove the MINISFORUM 790S7 from its packaging. Place the unit on a stable, flat surface with adequate ventilation. Ensure you have a Phillips head screwdriver and anti-static precautions (e.g., an anti-static wrist strap) before proceeding with component installation.

2.2 구성 요소 설치

The 790S7 is a barebone system, requiring the installation of memory and storage. An optional low-profile graphics card can also be installed.

메모리(RAM) 설치

The system supports up to 64GB of DDR5 SODIMM memory across two slots.

1. 메인보드에서 DDR5 SODIMM 슬롯 두 개를 찾으세요.
2. Align the notch on the SODIMM module with the key in the slot.
3. Insert the module at a 45-degree angle and push down until the side clips snap into place.

Image: Illustration of installing DDR5 SODIMM memory modules into the designated slots.

Storage (M.2 SSD) Installation

The 790S7 features two M.2 2280 PCIe4.0 SSD slots for high-speed storage.

1. 메인보드에서 M.2 슬롯을 찾으세요.
2. M.2 SSD를 약간 기울여 슬롯에 삽입합니다.
3. SSD를 살짝 누르고 제공된 나사로 고정합니다.

Recommendation: For PCIe Gen 5 SSDs, consider installing passive heatsinks to prevent thermal throttling, as these drives can generate significant heat.

Image: Diagram showing the installation process for M.2 PCIe 4.0 SSDs.

Optional Graphics Card Installation

The system includes a PCIe 5.0 x16 slot for a dedicated graphics card. Only low-profile, dual-slot graphics cards are compatible with the stock chassis.

1. Open the chassis to access the PCIe 5.0 x16 slot.
2. Carefully insert the low-profile graphics card into the slot until it is fully seated.
3. Secure the graphics card with the retaining mechanism or screw.

이미지: 클로즈업 view of the PCIe 5.0 x16 slot, indicating where a low-profile GPU can be installed.

무선 모듈 설치(선택 사항)

The 790S7 includes an M.2 2230 Key E slot for a wireless LAN card. If you wish to add Wi-Fi and Bluetooth capabilities, you will need to purchase and install a compatible module separately.

1. Locate the M.2 2230 Key E slot.
2. Insert the wireless module and secure it with a screw.
3. Connect the antenna cables to the module (if applicable).

2.3 주변기기 연결하기

After installing internal components, connect your external devices.

1. 모니터: Connect your display(s) to the HDMI2.1, DP1.4, or USB-C (Alt DP) ports.
2. 키보드 및 마우스: Connect to any available USB-A ports.
3. 회로망: For wired internet, connect an Ethernet cable to the 2.5G RJ45 port.
4. 오디오: Connect speakers or headphones to the Audio Jack, LINE OUT, or MIC IN ports as needed.
5. 힘: Connect the power cord to the PC and then to a power outlet.

이미지: 상세 view of the front and rear input/output ports available on the MINISFORUM 790S7.

2.4 운영 체제 설치

The MINISFORUM 790S7 supports Windows operating systems. You will need to install your preferred operating system onto your M.2 SSD. Refer to the operating system's installation guide for detailed steps, typically involving creating a bootable USB drive.

3. 사용 설명서

3.1 전원 켜기/끄기

• 전원 켜기: Press the Power Button located on the front of the chassis.
• 전원 끄기 : Initiate a shutdown from your operating system. Alternatively, press and hold the Power Button for 5 seconds to force a shutdown (use only when necessary).

3.2 디스플레이 구성

The 790S7 supports up to three independent displays simultaneously.

• HDMI2.1: 최대 4K@60Hz 해상도를 지원합니다.
• DP1.4: 최대 4K@60Hz 해상도를 지원합니다.
• USB-C (Alt DP): 최대 8K@60Hz 해상도를 지원합니다.

Connect your monitors to the desired ports. Your operating system's display settings will allow you to configure extended or duplicated desktop modes.

Image: The MINISFORUM 790S7 Mini PC connected to a triple monitor setup, demonstrating its multi-display capability.

3.3 포트 사용

Utilize the various ports for connecting peripherals:

• USB 3.2 Gen2 Type-C (Alt DP): 고속 데이터 전송 및 디스플레이 출력.
• USB 3.2 Gen1 Type-A: Standard high-speed USB for peripherals.
• USB 2.0 유형 A: For basic peripherals like keyboard and mouse.
• 2.5G RJ45: 고속 유선 네트워크 연결.
• Audio Jack / LINE IN / LINE OUT / MIC IN: For audio input and output devices.

3.4 BIOS 설정

To access the BIOS/UEFI settings, press the designated key (usually DEL or F2) repeatedly during startup. Within the BIOS, you can adjust various system parameters, including fan speeds for both the CPU and chassis fans.

4. 유지관리

4.1 청소

정기적인 청소는 최적의 성능을 유지하고 PC의 수명을 연장하는 데 도움이 됩니다.

• Use a soft, dry cloth to wipe the exterior of the chassis.
• For internal dust, use compressed air to gently clear dust from fans and heatsinks. Ensure the PC is powered off and unplugged before cleaning internally.

4.2 냉각 시스템

The 790S7 features a custom CPU cooler and a mesh-designed case to enhance heat dissipation.

이미지: 내부 view highlighting the custom CPU cooler designed for efficient heat management.

The case's mesh design promotes airflow, contributing to excellent cooling performance, typically maintaining temperatures below 60°C during operation and under 45dB at full load.

Image: Diagram showing the airflow path and cooling efficiency metrics of the 790S7 chassis.

4.3 Storage Cooling

High-performance M.2 SSDs, especially PCIe Gen 5 models, can generate significant heat. Installing passive heatsinks on your M.2 SSDs is recommended to prevent thermal throttling and ensure consistent performance.

5. 문제 해결

5.1 일반적인 문제

• 전원 없음: 전원 코드가 PC와 전원 콘센트에 제대로 연결되어 있는지 확인하십시오. 전원 콘센트가 정상적으로 작동하는지 확인하십시오.
• 디스플레이 없음: Check all monitor cables and ensure they are securely connected. Confirm the monitor is powered on and set to the correct input source. If a dedicated GPU is installed, ensure the monitor is connected to the GPU's output, not the motherboard's integrated graphics ports.
• 시스템 불안정성: Verify that RAM and SSDs are correctly seated. Ensure adequate cooling and consider updating drivers.

5.2 CMOS 리셋

If you encounter boot issues or incorrect BIOS settings, you can reset the CMOS (Complementary Metal-Oxide-Semiconductor) to default settings.

• Locate the CMOS Clear button on the rear I/O panel.
• With the PC powered off and unplugged, press and hold the CMOS Clear button for 5-10 seconds.
• 전원을 다시 연결하고 시스템 부팅을 시도하십시오.

5.3 추가 지원

If troubleshooting steps do not resolve your issue, please refer to the support section for contact information.

6. 제품 사양

Detailed technical specifications for the MINISFORUM 790S7 Mini PC:

Image: A summary table of the MINISFORUM 790S7's key specifications.

7. 보증 및 지원

7.1 보증 정보

MINISFORUM products typically come with a limited warranty. Please refer to the official MINISFORUM website or your purchase documentation for specific warranty terms and conditions applicable to your region and product model. Keep your proof of purchase for warranty claims.

7.2 기술 지원

For technical assistance, driver downloads, or further inquiries, please visit the official MINISFORUM support web대지:

MINISFORUM Official Support

You may also find helpful resources and community forums on the MINISFORUM web대지.