매뉴얼+

테크넷 TK-WA801

TECKNET Wireless Door Sensor Chime Alarm

모델: TK-WA801

브랜드: TECKNET

소개

Thank you for choosing the TECKNET Wireless Door Sensor Chime Alarm. This device provides an instant alert when a door or window opens, enhancing security for homes, businesses, and various other environments. It features a long wireless range, multiple melodies, adjustable volume, and visual RGB light indicators.

안전 정보

Please read all instructions carefully before installation and use. Keep the device away from water and extreme temperatures. Do not attempt to disassemble or repair the unit yourself. Avoid installing the sensor on metal doors or near strong electromagnetic fields, as this may interfere with its performance.

패키지 내용

  • 1 x Door Sensor (Transmitter)
  • 1 x Chime Receiver
  • 1 x 사용자 설명서
  • 양면 접착 테이프
  • 4 x LR44 Batteries (included in sensor)

설정

  1. Prepare the Sensor (Transmitter):
    • Locate the small plastic insulating tab on the side of the door sensor. Gently pull and remove this tab to activate the pre-installed LR44 batteries.
    • Ensure the ON/OFF switch on the sensor is set to the 'ON' position.
  2. 설치 표면을 준비하세요:
    • Clean the area on your door and door frame where the sensor and magnetic strip will be installed. Ensure the surface is dry and free of dust or grease for optimal adhesive performance.
  3. Mount the Sensor and Magnetic Strip:
    • Attach the double-sided adhesive tape to the back of both the sensor and the magnetic strip.
    • Affix the main sensor unit to the door frame and the smaller magnetic strip to the door itself.
    • 중요한: Align the triangular symbols (arrows) on both parts of the sensor. The gap between the sensor and the magnetic strip should be less than 0.78 inches (2 cm) when the door is closed.
  4. 수신기를 연결하세요:
    • Plug the chime receiver into a standard electrical outlet in a central location within your home or business.
  5. 초기 페어링(사전 페어링):
    • The sensor and receiver are typically pre-paired from the factory. Open and close the door where the sensor is installed. The receiver should chime and/or flash its RGB light.
Diagram showing correct and incorrect installation methods for the door sensor, emphasizing alignment and distance.
Figure 1: Correct Installation Method. Ensure the arrows on the sensor and magnetic strip align, and the gap is less than 0.78 inches.
Diagram illustrating adhesive mounting steps for the door sensor and receiver, showing cleaning, applying adhesive, and proper alignment.
Figure 2: Adhesive Mounting. Steps for attaching the sensor and magnetic strip using adhesive tape.

Video 1: TECKNET Door Sensor Alarm Chime. This video demonstrates the unboxing and installation process for the door sensor and receiver.

운영

  1. 변화하는 멜로디:
    • The receiver offers 61 unique ringtones. Press the 'Next Chime' button (usually marked with an arrow pointing right) on the receiver to cycle through the available melodies.
    • Press the 'Previous Chime' button (usually marked with an arrow pointing left) to go back to previous melodies.
  2. 볼륨 조절:
    • There are five adjustable volume levels (0-120dB), including a mute option. Short press the 'Volume' button (usually marked with a speaker icon) on the receiver to switch and cycle through the volume levels.
  3. RGB Light & Silent Mode:
    • The receiver features an RGB flashing light that provides a visual alert when the sensor is triggered. This is beneficial for individuals with hearing impairments.
    • To activate Silent Mode, cycle through the volume levels until the mute option is selected. In this mode, only the RGB light will flash, providing a discreet notification without sound.
  4. 확장 가능한 시스템:
    • Each receiver can be paired with up to 20 magnetic door sensors, allowing for comprehensive coverage across multiple entry points.
  5. 메모리 기능:
    • The device retains your preferred melody and volume settings even after a power outage.
Image showing the TECKNET chime receiver plugged into an outlet, with visual representations of different sound levels from 0dB (mute) to 120dB (loud party).
Figure 3: Loud Alert Sound & Volume Levels. The receiver offers five adjustable volume levels for various environments.
Image showing the TECKNET chime receiver plugged into an outlet next to a sleeping baby, highlighting the RGB display and mute mode features.
Figure 4: RGB Display and Mute Mode. Visual alerts are provided by the RGB light, with a silent mode for quiet environments.

Video 2: TECKNET Wireless Door Sensor Alarm Chime. This video showcases the various melodies and RGB light functions of the chime receiver.

유지

  • 청소: Wipe the sensor and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement (Sensor): If the LED light on the transmitter does not light up when the magnetic strip is separated, the batteries may need replacement. Carefully open the sensor casing, remove the old LR44 batteries, and insert new ones, ensuring correct polarity.

문제 해결

  • 차임벨이 울리지 않음:
    • Check if the receiver is plugged into a working outlet.
    • Ensure the sensor's ON/OFF switch is in the 'ON' position and its batteries are functional.
    • Verify the magnetic strip and sensor are aligned correctly and the gap is less than 0.78 inches.
    • Check if the receiver's volume is set to mute. Briefly press the volume button to increase the volume.
    • 다시 페어링: If the pairing between the transmitter and receiver is accidentally cleared (e.g., by long-pressing the volume button), follow these steps:
      1. Press and hold the 'Next Chime' button on the receiver for over 3 seconds. You will hear a "ding dong" sound, indicating the receiver is in pairing mode.
      2. Separate the magnetic sensor parts (move the door sensor magnet away). The chime receiver will play the default chime sound, confirming that the pairing is successfully completed.
  • 제한된 범위:
    • Ensure the receiver is placed in a central location, free from obstructions.
    • Avoid installing the sensor on metal surfaces or near large metal objects, as this can reduce the wireless range.

명세서

특징사양
모델 번호티케이-와801
무선 범위개방된 공간에서 최대 1000피트(300미터)
멜로디선택 가능한 곡 61개
볼륨 레벨5단계 (0~120dB)
시각 경보RGB Flashing Light
전원(수신기)교류 110V
전원(센서)LR44 배터리 4개(포함)
제어 방법터치 버튼
장착 유형Adhesive / Door Mount
확장성Up to 20 sensors per receiver
제품 치수4.5 x 3 x 1.5 인치
품목 무게5.3 온스

보증

TECKNET products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official TECKNET web자세한 보증 정보와 조건은 사이트에서 확인하세요.

지원하다

For any questions, technical assistance, or troubleshooting not covered in this manual, please contact TECKNET customer support:

  • 이메일: support@tecknetonline.com
  • Web대지: Visit the official TECKNET webFAQ 및 추가 리소스는 해당 사이트에서 확인하세요.