1. 서론
Thank you for choosing the OREiN OL17006 Bathroom Exhaust Fan with Light. This product is designed to enhance air quality and illumination in your bathroom, laundry room, or similar indoor spaces. It features a humidity sensor, adjustable airflow (CFM), a multi-color temperature LED light, and a nightlight function. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.
Image 1.1: The OREiN OL17006 Bathroom Exhaust Fan with Light, showcasin세련된 디자인과 통합 조명이 특징입니다.
2. 안전 정보
화재, 감전 또는 부상의 위험을 줄이기 위해 본 제품을 설치, 작동 및 유지 관리할 때는 항상 기본적인 안전 수칙을 준수하십시오.
- 모든 지침을 읽으십시오. Familiarize yourself with the product and its functions before use.
- 전기 안전: Disconnect power at the service panel before wiring or servicing the unit. Ensure all wiring complies with local electrical codes and standards.
- 적격 직원: 설치 및 배선 작업은 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 접지: 이 장치는 적절히 접지되어야 합니다.
- 통풍: Do not use this fan in kitchens or areas where it may be exposed to grease.
- 정리: 가연성 물질로부터 적절한 거리를 유지하십시오.
- 손상: Do not operate any fan with a damaged cord or plug, or if the fan motor is dropped or damaged in any manner.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- OREiN OL17006 조명이 있는 욕실 배기 팬
- Fast Bracket for Installation
- 사용 설명서(본 문서)
- Mounting Hardware (Screws, wire nuts, etc.)
4. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 오레인 |
| 모델명 | OL17006 |
| 기류 용량 | 80 / 110 Cubic Feet Per Minute (CFM) selectable |
| 소음 수준 | 0.8 / 1.0 Sones |
| 왓tage | 30 watts (Fan) |
| 권tage | 120 볼트 |
| 광 출력 | 1500루멘 |
| 색온도 | 3000K (Soft White), 4000K (Bright White), 5000K (Daylight) selectable |
| 야간 조명 | 2200K |
| 특별 기능 | Humidity Sensor, Adjustable Color Temperature, LED Light |
| 덕트 직경 | 4인치 |
| 하우징 치수 | 9.25인치 x 9.75인치 x 7.1인치 |
| 설치 크기 | 10.24인치 x 9.37인치(260 x 238mm) |
| Light Cover Size | 13인치 x 13인치 |
| 객실 유형 | 욕실, 세탁실 |
5. 설정 및 설치
The OREiN OL17006 fan is designed for easy installation in new construction or retrofit applications. It fits 10.24" x 9.37" ceiling constructions with a 4-inch duct.
5.1 사전 설치 단계
- 전원 차단: Ensure power is turned OFF at the circuit breaker before starting any installation work.
- 위치 선택: Choose a suitable location in the ceiling, ensuring adequate space for the fan housing and ductwork.
- 덕트: Plan for a 4-inch duct connection to the exterior.
5.2 설치 절차
The fan comes with a fast bracket for secure and easy installation. You can mount the exhaust fan between ceiling joists using the fast bracket, or nail/screw it directly to a joist.
- 하우징 장착: Secure the fan housing to the ceiling joists using the provided fast bracket or by nailing/screwing directly. Ensure the housing is level and firmly attached.
- 덕트 연결: Connect the 4-inch ductwork to the fan's exhaust port. Seal all duct connections with appropriate tape or sealant to prevent air leakage.
- 전기 배선: Connect the electrical wiring according to the wiring diagram provided with the unit and local electrical codes. Ensure proper grounding.
- Light Cover Installation: Once wiring is complete and tested, attach the light cover to the fan housing.
Image 5.1: Diagram illustrating the product dimensions, installation size (10.24" x 9.37"), and the fast bracket for mounting.
6. 사용 설명서
The OREiN OL17006 fan offers versatile operation modes and lighting options.
6.1 CFM Selection (Airflow Speed)
You can select between 80 CFM and 110 CFM airflow speeds to suit your ventilation needs. This is done by sliding a toggle switch located on the fan housing before final installation of the light cover.
Image 6.1: Illustration of the toggle switch on the fan housing used to select between 80 CFM and 110 CFM airflow settings.
6.2 Light Color Temperature (CCT) Selection
The integrated LED light offers three color temperature options: 3000K (Soft White), 4000K (Bright White), and 5000K (Daylight). To select your desired CCT, slide the toggle switch located on the back of the bath fan shade before installing it.
Image 6.2: Visual guide for selecting the LED light's color temperature (3000K, 4000K, 5000K) using the switch on the lamp그늘.
6.3 야간 조명 기능
The fan includes a 2200K nightlight. To activate the nightlight mode, cycle the wall switch of the light from OFF to ON-OFF-ON within 2 seconds. This quick sequence will switch the light to nightlight mode.
이미지 6.3: 전ample of the 2200K nightlight providing subtle illumination in a bathroom setting.
6.4 Humidity Sensing Mode
The built-in humidity sensor automatically turns the fan on when the humidity level in the room exceeds 60%. The LED indicator light on the back of the fan will be green when in humidity sensing mode.
To switch between Manual Mode (fan runs continuously) and Humidity Sensing Mode, cycle the wall switch of the fan to the "OFF" position and then back to the "ON" position. The fan will indicate the current mode by the color of its indicator light.
Image 6.4: Explanation of Manual Mode (red indicator, continuous operation) and Humidity Sensing Mode (green indicator, automatic activation at 60% humidity).
7. 유지관리
정기적인 유지관리를 통해 배기팬의 최적의 성능과 수명을 보장할 수 있습니다.
- 전원 차단: 유지보수 작업을 하기 전에 항상 회로 차단기에서 전원을 차단하십시오.
- Cleaning the Grille/Light Cover: Remove the light cover and wash it with mild soap and water. Rinse thoroughly and dry completely before reattaching.
- 선풍기 날개 청소하기: 팬 블레이드를 광고로 부드럽게 닦으세요.amp 천으로 먼지와 이물질을 제거하세요. 칼날을 구부리지 마세요.
- 모터 정비: 모터는 영구 윤활 방식이므로 추가적인 오일 공급이 필요하지 않습니다.
- 덕트 작업 검사: Periodically check ductwork for obstructions or damage.
8. 문제 해결
If you encounter issues with your OREiN OL17006 fan, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 작동하지 않습니다 | 전원 공급이 없습니다 느슨한 배선 모터 고장 | 회로 차단기와 벽 스위치를 확인하세요 Verify all wire connections are secure (ensure power is off) 고객 지원에 문의하세요 |
| 불이 켜지지 않습니다 | 전원 공급이 없습니다 느슨한 배선 LED 고장 | 회로 차단기와 벽 스위치를 확인하세요 Verify all wire connections are secure (ensure power is off) 고객 지원에 문의하세요 |
| 팬이 시끄럽습니다 | 느슨한 장착 Duct obstruction 더러운 팬 블레이드 모터 문제 | 팬 하우징이 단단히 고정되었는지 확인하십시오. Check ductwork for debris Clean fan blades (ensure power is off) 고객 지원에 문의하세요 |
| 습도 센서가 작동하지 않습니다 | 잘못된 모드가 선택되었습니다. Humidity level below 60% 센서 오작동 | Cycle wall switch to switch to Humidity Sensing Mode Ensure room humidity is above 60% 고객 지원에 문의하세요 |
| Nightlight not activating | Incorrect switch sequence | Ensure ON-OFF-ON sequence is performed within 2 seconds |
9. 보증 및 지원
OREiN products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the warranty card included with your product or contact OREiN customer service directly.
9.1 고객 지원
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact OREiN customer support:
- 핸드폰: 1 (844) 506-1530 (24-Hour Service)
- 온라인: Visit the OREiN store on Amazon or search for OREiN on the internet to find contact options.
Image 9.1: OREiN customer service contact details, including a 24-hour service phone number.
