1. 서론
This manual provides essential information for setting up, operating, and maintaining your Waveshare 1.47inch LCD Display Module with Touch Panel. This micro LCD display features a 172x320 resolution, 262K colors, and an IPS panel, offering clear and vibrant visuals. It integrates a JD9853 driver chip for the display and an AXS5106L capacitive touch control chip, utilizing SPI and I2C communication respectively. The module is designed for compatibility with various controller boards, including Raspberry Pi, Raspberry Pi Pico, and ESP32S3, minimizing the required I/O pins for integration into your projects.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 1.47inch Touch LCD x1
- SH1.0 13PIN cable ~100mm x1
- FFC cable x1
Figure 2.1: Contents of the Waveshare 1.47inch LCD Display Module package, including the display, SH1.0 13PIN cable, and FFC cable.
3. 특징
The Waveshare 1.47inch LCD Display Module offers the following key features:
- 172x320 Resolution: Provides a clear and colorful display effect with 262K colors.
- High Touch Screen Transmittance: Ensures fast response and long lifetime for touch interactions.
- Integrated Driver Chips: Embedded JD9853 driver chip for the display and AXS5106L capacitive touch control chip.
- 유연한 커뮤니케이션: Uses SPI for display and I2C for touch, minimizing required I/O pins.
- 광범위한 호환성: Supports controller boards such as Raspberry Pi, ESP32S3, and Raspberry Pi Pico.
- Rich Wiki Resources: Official Wiki resources are available for development and examp레.
Figure 3.1: Visual summary of the 1.47inch Touch LCD Display Module's key features and specifications.
4. 사양
Detailed technical specifications for the 1.47inch Touch LCD Display Module:
| 매개변수 | 값 | 매개변수 | 값 |
|---|---|---|---|
| 운영 볼륨tage | 3.3V / 5V | 해결 | 172 x 320 픽셀 |
| 디스플레이 드라이버 | JD9853 | 터치 드라이버 | AXS5106L |
| 디스플레이 인터페이스 | 4-와이어 SPI | 터치 인터페이스 | I2C |
| 디스플레이 패널 | IPS | 터치타입 | 용량성 |
| 디스플레이 크기 | 17.75 x 32.93mm | 모듈 크기 | 22.05 x 41.69mm |
| 품목 무게 | 0.64 온스 | 패키지 크기 | 2.7 x 1.9 x 0.6 인치 |
Figure 4.1: Key specifications of the display module.
5. 설정
5.1 Onboard Voltag전자 번역기
이 모듈에는 온보드 볼륨이 포함되어 있습니다.tage translator, making it compatible with both 3.3V and 5V power inputs. This simplifies integration with various microcontrollers without requiring external level shifters.
Figure 5.1: The module's onboard voltage translator for 3.3V/5V compatibility.
5.2 SPI and I2C Control Interfaces
The display uses a 4-wire SPI interface for data transfer, while the capacitive touch panel communicates via I2C. This dual-interface design optimizes pin usage.
핀아웃 설명
| 핀 | 설명 |
|---|---|
| (주)비씨씨 | Power (3.3V / 5V input) |
| 접지 | 지면 |
| 미소 | SPI MISO pin |
| 모시 | SPI MOSI 핀 |
| SCLK | SPI Clock pin |
| LCD_CS | LCD Chip Selection, low active |
| LCD_DC | LCD Data/Command selection (high for data, low for command) |
| LCD_RST | LCD Reset, low active |
| LCD_BL | LCD 백라이트 |
| TP_SDA | TP Data pin |
| TP_SCL | TP Clock pin |
| TP_INT | TP Interrupt pin |
| TP_RST | TP Reset, low active |
Figure 5.2: Pinout details for connecting the display module.
5.3 연결 예amp레
The module can be easily connected to various development boards. Below are examples for Raspberry Pi and ESP32-S3.
Figure 5.3: Connecting with Raspberry Pi 5.
Figure 5.4: Connecting with ESP32-S3.
Note: Raspberry Pi 5 and ESP32-S3 boards are not included with the display module.
6. 사용 설명서
To operate the Waveshare 1.47inch LCD Display Module, you will need to program your chosen microcontroller (e.g., Raspberry Pi, ESP32S3, Raspberry Pi Pico) to communicate with the display and touch controller.
6.1 소프트웨어 구성
- 라이브러리 설치: Depending on your development board and programming language (e.g., Python, C/C++), you will need to install specific libraries for SPI and I2C communication, as well as display and touch control.
- 화면 초기화: Configure the display driver (JD9853) via SPI to initialize the screen, set resolution, and manage colors.
- Initialize Touch: Configure the touch controller (AXS5106L) via I2C to enable touch detection and read touch coordinates.
- 디스플레이 콘텐츠: Use graphics libraries to draw text, shapes, and images on the LCD.
- Handle Touch Input: Implement code to read touch events and respond to user interactions.
자세한 프로그래밍 예시는 다음과 같습니다.amples, code libraries, and comprehensive tutorials, please refer to the official Waveshare Wiki resources. These resources provide platform-specific guides for Raspberry Pi, ESP32S3, Raspberry Pi Pico, and Arduino.
공식 위키 자료: Visit Waveshare Wiki
7. 유지관리
Proper care and maintenance will ensure the longevity and optimal performance of your display module.
- 손질: Avoid applying excessive force to the display or touch panel. Handle the module by its edges to prevent damage to components.
- 청소: 부드럽고 보푸라기가 없는 천을 사용하여 약간 damp물이나 순한 화면 세정제를 사용하여 디스플레이 표면을 부드럽게 닦아주세요. 연마성 재질이나 강한 화학 물질은 사용하지 마십시오.
- 저장: Store the module in a dry, dust-free environment, away from direct sunlight and extreme temperatures. If not in use for extended periods, consider storing it in its original anti-static packaging.
- 힘: 전원 공급 장치 볼륨을 확인하십시오.tage is within the specified 3.3V to 5V range. Incorrect voltag모듈이 손상될 수 있습니다.
8. 문제 해결
If you encounter issues with your Waveshare 1.47inch LCD Display Module, refer to the following troubleshooting tips:
- 디스플레이가 켜지지 않음:
- Check power connections (VCC and GND) to ensure they are correctly wired and receiving the appropriate voltage (3.3V 또는 5V).
- Verify the LCD backlight (LCD_BL) pin is correctly connected and enabled in your software.
- Ensure the SPI communication pins (MISO, MOSI, SCLK, LCD_CS, LCD_DC, LCD_RST) are correctly wired and configured.
- No Display Output / Garbled Display:
- Confirm that the display driver (JD9853) is correctly initialized in your code.
- Check for correct SPI mode and clock speed settings.
- Ensure all SPI data lines are securely connected and free from shorts.
- 터치가 응답하지 않음:
- Verify I2C connections (TP_SDA, TP_SCL) are correct.
- Ensure the touch controller (AXS5106L) is correctly initialized via I2C in your software.
- Check if the TP_INT pin is correctly configured and monitored for touch events.
- Ensure the touch panel surface is clean and free from obstructions.
- 통신 오류:
- Double-check all wiring against the pinout diagram.
- Ensure your microcontroller's GPIO pins are correctly configured for SPI and I2C.
- Consult the Waveshare Wiki for specific examples and common issues related to your development board.
9. 치수
The physical dimensions of the Waveshare 1.47inch LCD Display Module are provided below for integration planning.
Figure 9.1: Outline dimensions of the 1.47inch Touch LCD module (Unit: mm).
10. 공식 제품 영상
Explore these official product videos for additional guidance and demonstrations:
비디오 10.1: 제품 종료view and demonstration of the Waveshare 1.47inch LCD Display Module.
Video 10.2: Detailed look at the features and capabilities of the display module.
Video 10.3: Guide on connecting the display module to a development board.
Video 10.4: Software setup and programming examples for the display module.
Video 10.5: Demonstration of touch functionality and responsiveness.
Video 10.6: Quick start guide for initial setup of the display module.
Video 10.7: Advanced usage scenarios and project ideas with the display module.
Video 10.8: Compatibility and integration with various single-board computers.
11. 보증 및 지원
Waveshare products are designed for reliability and performance. For specific warranty information, please refer to the purchase documentation or contact Waveshare directly.
For technical support, detailed documentation, and community forums, please visit the official Waveshare Wiki. The Wiki provides extensive resources, including setup guides, programming examples, and troubleshooting tips for the 1.47inch Touch LCD module.
Waveshare Support: https://www.waveshare.com/wiki/Main_Page