VISFLAIR 키네틱 윈드 스피너(모델 LT00167S1) 사용 설명서

소개

This manual provides detailed instructions for the assembly, operation, and maintenance of your VISFLAIR Kinetic Wind Spinner. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

안전 정보

• Ensure the wind spinner is installed in a stable location, away from overhead power lines or structures.
• Avoid installing in areas with extremely high winds that could cause damage or dislodge the spinner.
• Keep children and pets away from the spinner during assembly and operation.
• Regularly check for loose parts or damage. Do not operate if damaged.

패키지 내용

조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Wind Spinner Head (Kinetic Sculpture)
• Support Pole Sections (typically 2-3 sections)
• 지상 스테이크
• Assembly Hardware (if applicable, e.g., screws, nuts)
• 사용 설명서(본 문서)

설정 및 조립

Follow these steps to assemble your VISFLAIR Kinetic Wind Spinner:

1. Step 1: Assemble the Support Pole.

   Carefully connect the pole sections by screwing them together clockwise. Ensure each section is securely tightened to form a rigid support pole.

   

   Illustration of the thick ground stake and pole sections. The pole sections are designed to screw together for a secure fit.

2. Step 2: Attach the Ground Stake.

   Screw the ground stake onto the bottom end of the assembled support pole. This stake provides stability when inserted into the ground.

3. Step 3: Attach the Wind Spinner Head.

   Carefully attach the kinetic wind spinner head to the top of the support pole. Ensure it is securely fastened according to the design (e.g., by screwing or sliding into place). The spinner head features multiple moon-shaped blades designed to rotate independently.

   

   The fully assembled wind spinner, showcasing its moon-shaped blades and overall structure.

4. Step 4: Select Installation Location.

   Choose a location in your garden or yard that receives adequate wind and is free from obstructions. Ensure the ground is soft enough to insert the stake firmly.

5. Step 5: Install the Wind Spinner.

   Push the ground stake firmly into the soil until the support pole is stable and upright. For best results, ensure the pole is vertical.

   

   The wind spinner installed in a garden, demonstrating its approximate height of 63 inches and 15-inch diameter.

작동 지침

The VISFLAIR Kinetic Wind Spinner is designed to rotate with natural wind currents, creating a dynamic visual effect. No power source or manual intervention is required for its primary function.

• The moon-shaped blades are engineered to spin in different directions, providing a continuous and mesmerizing display.
• Optimal performance is achieved in moderate wind conditions. In very low wind, movement may be minimal.
• The spinner is equipped with durable ball bearings to ensure smooth and effortless rotation.

상세한 view of the spinner's construction, highlighting the ball bearings for smooth movement and the colorful, anti-rust coated moon elements.

유지

To ensure your wind spinner remains in excellent condition and functions optimally, follow these maintenance guidelines:

• 청소: Periodically wipe down the metal surfaces with a soft, damp cloth to remove dust, dirt, or debris. Avoid abrasive cleaners that could damage the finish.
• 점검: Regularly check all connections (screws, pole sections) to ensure they remain tight. Inspect the spinner blades and bearings for any signs of wear or damage.
• 매끄럽게 하기: If the spinning action becomes stiff over time, a small amount of silicone-based lubricant can be applied to the ball bearings to restore smooth rotation.
• 겨울 보관: In areas with harsh winter conditions (heavy snow, ice), it is recommended to disassemble the wind spinner and store it indoors to protect it from extreme weather.

문제 해결

명세서

보증 및 지원

For any questions, concerns, or support regarding your VISFLAIR Kinetic Wind Spinner, please contact VISFLAIR customer service. Refer to your purchase documentation for specific warranty details.

You can visit the official VISFLAIR store on Amazon for more information: VISFLAIR Store