매뉴얼+

BRIKSMAX BX723

BRIKSMAX 2.0 Light Kit Instruction Manual

For Lego Architecture Trevi Fountain Set (Model 21062)

Model: BX723 | Brand: BRIKSMAX

1. 서론

This instruction manual provides detailed guidance for installing and operating your BRIKSMAX 2.0 LED Light Kit for the Lego Architecture Trevi Fountain set (model 21062). This kit is designed to enhance the visual appeal of your Lego model with integrated lighting. Please read all instructions carefully before beginning installation.

2. 안전 정보

  • 질식 위험을 방지하려면 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하십시오.
  • Handle wires and LED components with care to avoid damage.
  • Ensure the power source (USB cable or battery box) is correctly connected and within specified voltag제한합니다.
  • Do not expose the light kit to water or excessive moisture.
  • Avoid excessive force when connecting or disconnecting components.

3. 포함 사항

The BRIKSMAX 2.0 Light Kit for Lego Trevi Fountain 21062 includes the following components:

  • LED Light Kit components
  • 종이 지침
  • 사용자 가이드
  • AA Battery Box
  • USB 케이블
Contents of the BRIKSMAX 2.0 Light Kit for Lego Trevi Fountain
Image: The complete contents of the BRIKSMAX 2.0 Light Kit, including LED components, instructions, user guide, AA battery box, and USB cable.

4. 설정 및 설치

Installation of the BRIKSMAX 2.0 Light Kit requires careful disassembly and reassembly of parts of your Lego Trevi Fountain set. Follow the included paper instructions and refer to the video guide for visual assistance.

4.1 일반 설치 단계:

  1. 레고 모델을 준비하세요: Carefully disassemble the sections of your Lego Trevi Fountain model as indicated in the instructions to access the areas where lights will be installed.
  2. LED 조명 설치: Place the small LED lights into the designated brick locations. Ensure wires are routed neatly to avoid pinching or damage.
  3. 확장 보드에 연결: Connect the LED wires to the expansion boards. Pay attention to the correct orientation and ensure secure connections.
  4. 전선 관리: Utilize the provided wire organizer parts to conceal and secure wires, preventing breakage and maintaining the model's aesthetic.
  5. Reassemble Lego Model: Carefully reassemble the Lego bricks around the installed lights and wires.
  6. 전원 연결: Connect the expansion boards to the battery box or USB power cable.
BRIKSMAX 2.0 Light Kit installed in Lego Trevi Fountain 21062, showing illuminated details.
Image: The BRIKSMAX 2.0 Light Kit integrated into the Lego Trevi Fountain, highlighting the illuminated architectural details and water effects.
Close-up of BRIKSMAX wire management system with a red LED light and grey brick shells
이미지: 클로즈업 view demonstrating the BRIKSMAX wire management system, showing how wires are protected and neatly integrated using specialized brick shells.
Comparison of BRIKSMAX connectors and wire management with generic alternatives
Image: A comparison illustrating the larger, safer, and softer connectors and improved wire management of BRIKSMAX kits versus smaller, harder, and less organized alternatives.

4.2 Video Installation Guide:

For a visual step-by-step installation guide, please watch the official BRIKSMAX video:

Video: Official BRIKSMAX installation guide for the Lego Trevi Fountain light kit, demonstrating the process of adding LED lights and managing wires.

5. 사용 설명서

Once the light kit is fully installed and connected to a power source, operating it is straightforward:

  • 전원 켜기: If using the battery box, ensure batteries are inserted correctly and switch the power button to the 'ON' position. If using a USB cable, connect it to a compatible USB power adapter (not included).
  • 조명 효과: The kit is designed to provide continuous illumination. Some kits may include a remote control for customizable lighting effects or color changes, if applicable to your specific model.
  • 전원 끄기 : To turn off the lights, switch the battery box to 'OFF' or disconnect the USB power cable.
Lego Trevi Fountain model with BRIKSMAX lights on and off comparison
Image: A side-by-side comparison of the Lego Trevi Fountain model, showing the dramatic difference with the BRIKSMAX light kit turned on versus off.
Close-up of illuminated Lego Trevi Fountain details with BRIKSMAX lights
이미지: 상세 view of the Lego Trevi Fountain illuminated by the BRIKSMAX light kit, highlighting the warm white lights in the windows and the blue lights in the fountain water.

6. 유지관리

To ensure the longevity and optimal performance of your BRIKSMAX Light Kit:

  • 청소: Use a soft, dry cloth to gently dust the LED components and wires. Avoid using liquid cleaners.
  • 와이어 검사: Periodically check wires for any signs of wear, fraying, or damage. Ensure all connections remain secure.
  • 저장: If storing the Lego model for an extended period, remove batteries from the battery box to prevent leakage.

7. 문제 해결

문제가능한 원인해결책
불이 켜지지 않습니다No power, loose connection, dead batteriesCheck battery box switch, replace batteries, ensure USB cable is connected to a working power source, verify all wire connections.
일부 조명이 작동하지 않습니다Loose wire, damaged LED, faulty expansion boardInspect individual LED connections to the expansion board. Ensure wires are not pinched. If an LED is damaged, contact support for replacement.
조명 깜박임Unstable power, loose connectionEnsure power source is stable. Check all connections for tightness.

8. 사양

  • 상표: 브릭스맥스
  • 모델 번호: BX723
  • Compatible Lego Set: Lego Architecture Trevi Fountain 21062
  • 광원 유형: 발광 다이오드(LED)
  • 색상: Warm White (main), Blue (fountain)
  • 재료: 플라스틱
  • 전원: Battery Powered (AA Battery Box) or USB cable
  • 광원 수: 10 (as per product specifications, may vary by specific kit design)
  • 품목 무게: 11.6 온스
  • 제품 크기: 6.5 x 4.72 x 1.57인치 (포장/키트 크기)

9. 보증 및 지원

BRIKSMAX is committed to providing quality products and customer satisfaction. If you encounter any issues, or if there are damaged or missing parts, please contact BRIKSMAX customer service for assistance. We offer a warm service and are ready to help with replacements or troubleshooting.

For support, please refer to the contact information provided with your product packaging or visit the official BRIKSMAX store on Amazon.

관련 문서 - BX723

사전view Briksmax 2.0 BX723 Trevi Fountain Building Block Lighting Installation Guide
This document provides installation instructions for the Briksmax 2.0 LED lighting kit (BX723) for the Trevi Fountain building block set (21062). It details the process of installing and connecting the lighting components.
사전view BRIKSMAX Trevi Fountain 21062 Building Set with Lighting - Instruction Manual
Step-by-step assembly instructions for the BRIKSMAX Trevi Fountain 21062 building set, including detailed guidance for the integrated lighting kit. Features model numbers BX723 2 and other BRIKSMAX products.
사전view BRIKSMAX Trevi Fountain 21062 Lighting Kit Installation Manual
Detailed installation guide for the BRIKSMAX Trevi Fountain 21062 lighting kit, featuring step-by-step instructions, remote control operation, and troubleshooting tips for enthusiasts.
사전view BRIKSMAX The Razor Crest 75331 LED Lighting Kit Installation Guide
Official installation instructions for the BRIKSMAX LED lighting kit designed for the LEGO Star Wars The Razor Crest 75331 set. This guide provides detailed steps for integrating the lighting system.
사전view BRIKSMAX LED Lighting Kit for LEGO Architecture Paris 21044 - Assembly Instructions
Detailed step-by-step instructions for installing the BRIKSMAX LED lighting kit for the LEGO Architecture Paris 21044 set. Enhance your model with lights.
사전view BRIKSMAX LED Lighting Kit for LEGO Architecture Trafalgar Square (21045) - Installation Guide
Detailed installation instructions for the BRIKSMAX LED lighting kit designed for the LEGO Architecture Trafalgar Square (21045) set. This guide provides step-by-step visual and textual instructions to illuminate your model.