1. 서론
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.
Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. 상자 안에 무엇이 들어있나요?
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- 사용자 가이드 x1
- 점퍼 케이블 x1
- Inflatable Tube x1
- 보관 가방 x1
- 충전 케이블 x1
Image 2.1: All items included in the Andeman EP-177 product package.
3. 제품 특징
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- 최대 출력 4000A 점프 스타터: Capable of starting 12V vehicles with up to 8.5L gas or 7L diesel engines.
- 150PSI 공기 압축기: Integrated portable inflator for tires, sports equipment, and other inflatables.
- 24000mAh 파워뱅크: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Multi-Mode LED Light: Features standard illumination, SOS, and alert modes for various situations.
- 10가지 안전 보호 조치: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.
Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 안데만 |
| 모델 | 이파워-177 |
| 피크 출력 전류 | 4000 Amps |
| 배터리 용량 | 24000mAh |
| 엔진 호환성 | 최대 8.5L 가솔린 / 7L 디젤 |
| 공기 압축기 압력 | 최대 150PSI |
| 충전 입력(C 타입) | 5V/3A, 9V/2A, 12V/1.5A |
| USB-A 출력 | QC3.0 |
| USB-B 출력 | 5V/3A |
| DC 출력 | 15V |
| 제품 치수 | 1.97인치 깊이 x 4.33인치 너비 x 7.68인치 높이 |
| 품목 무게 | 2.86파운드 |
| 배터리 유형 | 리튬 이온 |
5. 설정
5.1 초기 충전
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.
Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 배터리 잔량 확인
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. 사용 설명서
6.1 차량 점프 스타트
- 1단계: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- 2단계: 빨간색 cl을 연결하세요amp 차량의 양극(+) 배터리 단자와 검은색 클립에 연결하십시오.amp 차량의 배터리 음극(-) 단자에 연결하십시오.
- 3단계: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- 4단계: 차량 시동 후 점퍼 케이블을 제거하십시오.amps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.
Image 6.1: Step-by-step guide for jump starting a vehicle.
6.2 공기 압축기 사용 방법
- 1단계: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- 2단계: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- 3단계: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- 4단계: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
메모: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.
Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 파워뱅크로 사용하기
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.
Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 LED 손전등 사용법
The integrated LED light offers three modes:
- 표준 조명: 지속적인 조명을 제공합니다.
- 구조 요청 모드: 비상 상황에 SOS 신호를 보냅니다.
- 경고 모드: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.
Image 6.4: The Andeman EP-177's LED flashlight in use.
7. 안전수칙
부상이나 기기 손상을 방지하기 위해 다음 안전 지침을 준수하십시오.
- 점프 스타터 단자를 단락시키지 마십시오.
- 장치를 극한 온도(-20°C 미만 또는 60°C 이상)에 노출시키지 마세요.
- 장치를 분해하지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.
이미지 7.1: 이상view of the 10 safety protections.
8. 유지관리
- 직사광선을 피해 서늘하고 건조한 곳에 기기를 보관하세요.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- 부드러운 천으로 외부를 청소하고 damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- 모든 포트에 먼지와 이물질이 없는지 확인하십시오.
9. 문제 해결
- 장치가 켜지지 않습니다:
- Ensure the device is charged. Connect it to a power source and allow it to charge for a period.
- Vehicle does not start after jump-starting:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. 보증 및 지원
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
