ATTACK SHARK X85 Pro

ATTACK SHARK X85 Pro Wireless Mechanical Gaming Keyboard User Manual

소개

This manual provides detailed instructions for the ATTACK SHARK X85 Pro Wireless Mechanical Gaming Keyboard. It covers setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device. The X85 Pro features tri-mode connectivity, a smart TFT screen, a multi-function knob, hot-swappable switches, and a gasket-mounted design for an enhanced typing experience.

ATTACK SHARK X85 Pro 75% Layout TFT Screen Mechanical Keyboard

Image: The ATTACK SHARK X85 Pro keyboard, highlighting its 75% layout, TFT screen, and mechanical switches.

설정

패키지 내용

  • ATTACK SHARK X85 Pro Mechanical Keyboard
  • USB-C 케이블
  • 2.4GHz USB 수신기
  • 키캡 풀러
  • 스위치 풀러

키보드 연결

The X85 Pro supports three connection modes: 2.4GHz wireless, Bluetooth 5.1, and USB-C wired.

Three-Mode Connection options for the ATTACK SHARK X85 Pro keyboard

Image: Diagram illustrating the three connection modes: Bluetooth, 2.4GHz wireless, and USB-C wired.

2.4GHz 무선 모드

  1. Locate the 2.4GHz USB receiver, typically stored in a magnetic slot on the keyboard.
  2. USB 수신기를 컴퓨터의 사용 가능한 USB 포트에 연결합니다.
  3. On the keyboard's side switch, select the '2.4G' mode.
  4. 키보드가 자동으로 연결됩니다.

블루투스 모드

  1. On the keyboard's side switch, select the 'BT' mode.
  2. The TFT screen will display Bluetooth connection options (BT1, BT2, BT3).
  3. 누르다 Fn + 1, Fn + 2, 또는 Fn + 3 to select a Bluetooth channel. The indicator will flash rapidly.
  4. On your device (PC, Mac, Laptop), enable Bluetooth and search for 'ATTACK SHARK X85 Pro'.
  5. Select the keyboard to pair. The indicator will stop flashing once connected.

USB-C 유선 모드

  1. 제공된 USB-C 케이블을 키보드의 USB-C 포트에 연결합니다.
  2. 케이블의 다른 쪽 끝을 컴퓨터의 USB 포트에 연결하세요.
  3. On the keyboard's side switch, select the 'USB' mode.
  4. 키보드는 유선 장치로 작동하며 동시에 충전도 가능합니다.

키보드 높이 조정

The keyboard features two-level adjustable feet on the underside. Flip them out to achieve your preferred typing angle and reduce wrist strain during extended use.

Adjustable two-level feet on the keyboard for ergonomic typing

이미지: 클로즈업 view of the keyboard's adjustable two-level feet and PBT keycaps.

작동 지침

TFT Smart Screen and Knob Functions

The 0.85-inch TFT screen displays essential information and allows for customization. The aluminum knob provides intuitive control.

TFT Smart Screen displaying various configuration options

Image: The 0.85-inch TFT smart screen showing options for RGB effects, color, brightness, speed, connection, layout, volume, and language, along with a custom GIF image display.

  • 기본 디스플레이: Shows battery level, time, and connection status.
  • Adjusting TFT Display: Turn the knob to navigate through menu sections (Effect, Color, Brightness, Speed, Connect, Layout, Volume, Language). Press the knob to confirm a selection.
  • 볼륨 조절: 길게 누르기 Fn + 노브 to enter volume adjustment mode. Turn the knob to adjust volume. Long press Fn + 노브 다시 종료합니다.
  • 사용자 지정 GIF 이미지: The screen supports custom GIF images. Refer to the QMK Web Driver section for details on uploading custom content.
Multi-function knob controls for volume, brightness, RGB effects, and language switching

Image: Visual guide to the multi-function knob's capabilities, including volume, brightness, RGB effects, and language switching.

RGB 백라이트 제어

The keyboard features vivid 16.8M-color RGB backlighting with multiple effects.

Keyboard backlight settings with key combinations

Image: Key combinations for controlling RGB backlight settings: Fn + Enter to switch color, Fn + </-> to adjust speed, Fn + \| to switch light mode, and Fn + Up/Down arrow to adjust brightness.

  • Fn + Enter: 백라이트 색상을 전환합니다.
  • Fn + \|: Switch light mode (19+ effects available).
  • Fn + < (Left Arrow): 백라이트 속도를 낮추세요.
  • Fn + > (Right Arrow): 백라이트 속도를 높입니다.
  • Fn + 위쪽 화살표: 백라이트 밝기를 높입니다.
  • Fn + 아래쪽 화살표: 백라이트 밝기를 낮추세요.

Music-reactive lighting is exclusive to 2.4G and wired modes.

핫스왑 가능 스위치

The X85 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports 3-pin and 5-pin switches.

Hot-swappable PCBA with linear blueberry switches and custom stabilizer

이미지: 상세 view of the hot-swappable PCBA, showing compatibility with 3/5 pin switches, custom stabilizers, and linear blueberry switches with their specifications.

  1. Use the provided switch puller to carefully remove the keycap, then the switch.
  2. 새 스위치의 핀을 PCB의 소켓에 맞춰 정렬합니다.
  3. 새 스위치를 딸깍 소리가 날 때까지 제자리에 살살 눌러 넣으세요. 핀이 구부러지지 않았는지 확인하세요.
  4. 키캡을 교체하세요.

큐엠케이 Web Driver for Customization

The keyboard is compatible with QMK firmware, allowing for advanced customization through a web-based driver. This enables macro recording, key redefinition, RGB effect customization, and uploading custom GIF images to the TFT screen.

큐엠케이 Web 키보드 사용자 지정을 위한 드라이버 인터페이스

이미지: QMK 스크린샷 Web Driver interface, demonstrating options for macro editing, RGB effects, key redefinition, and DIY GIF image customization.

Access the QMK Web Driver via your web browser (specific URL usually provided by manufacturer or found through a quick search for 'ATTACK SHARK X85 Pro QMK'). Follow the on-screen instructions to program your keyboard.

유지

키보드 청소

  • 청소하기 전에 키보드를 컴퓨터에서 분리하세요.
  • 부드러운 브러시나 압축 공기를 사용하여 키캡 사이의 먼지와 이물질을 제거하세요.
  • For keycap cleaning, gently remove keycaps using the provided puller. Wipe them with a damp 천과 순한 비눗물로 닦은 후 완전히 말린 다음 다시 부착하십시오.
  • 부드럽고 보풀이 없는 천으로 키보드 표면을 닦으세요. 강한 화학 물질이나 연마재는 사용하지 마세요.

배터리 관리

이 키보드에는 4000mAh 용량의 충전식 배터리가 장착되어 있습니다.

  • 제공된 USB-C 케이블을 사용하여 키보드를 충전하세요.
  • 배터리 수명을 연장하려면 배터리를 자주 완전히 방전시키지 마세요.
  • 장기간 키보드를 보관할 경우, 보관하기 전에 약 50%까지 충전하세요.

문제 해결

문제가능한 원인해결책
무선 모드에서 키보드가 응답하지 않습니다.배터리가 부족하거나, 잘못된 모드를 선택했거나, 수신기가 연결되지 않았거나, 페어링 문제가 있습니다.Charge the keyboard. Ensure the side switch is set to '2.4G' or 'BT'. Re-insert the 2.4GHz receiver. Re-pair Bluetooth. Try wired mode to confirm functionality.
RGB 백라이트가 작동하지 않거나 제대로 켜지지 않습니다.Backlight turned off, brightness too low, specific mode limitations.밝기를 조정하려면 다음을 사용하세요. Fn + 위쪽 화살표. Cycle through modes with Fn + \|. Note that music-reactive lighting is only available in 2.4G/wired modes.
키가 등록되지 않거나 두 번 입력됨.스위치가 헐거워졌거나, 키캡 아래에 이물질이 있거나, 소프트웨어 문제일 수 있습니다.Remove keycap and switch, check for debris, and re-seat the switch firmly. Ensure QMK software is correctly configured if custom settings are applied.
TFT screen not displaying correctly.소프트웨어 오류, 잘못된 설정.Restart the keyboard. Use the knob to navigate to display settings and ensure correct configuration. Check for firmware updates via the QMK Web 운전사.
Poor wireless range or interference.Obstructions, other wireless devices, distance.Move the keyboard closer to the receiver/device. Remove obstructions. Avoid placing the receiver near other wireless transmitters (e.g., Wi-Fi routers).

명세서

  • 상표: 공격상어
  • 모델: X85 프로
  • 연결성: Bluetooth 5.1, 2.4GHz 무선, USB-C 유선
  • 공들여 나열한 것: 75%
  • 스위치: Hot-Swappable (supports 3/5-pin mechanical switches)
  • 키캡: PBT, Gradient Side-Print
  • 백라이트: RGB (16.8만 색상, 19가지 이상의 효과)
  • 배터리: 4000mAh
  • 특별 기능: 0.85" TFT Smart Screen, Multi-function Knob, Gasket Mount Structure, N-Key Rollover, QMK/VIA compatibility
  • 호환 장치: Laptop, PC, Windows, Mac
  • 품목 무게: 약 2.33파운드
  • 패키지 크기: 14.61 x 7.6 x 2.05 인치

보증 및 지원

보증 정보 및 기술 지원에 대해서는 ATTACK SHARK 공식 웹사이트를 참조하십시오. web해당 사이트를 방문하거나 제품을 구매한 소매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

You can also visit the official ATTACK SHARK Store on Amazon for additional product information and support resources: 어택 샤크 스토어

Optional protection plans may be available for purchase separately, offering extended coverage beyond the standard manufacturer's warranty. Please check with your retailer for details.

관련 문서 - X85 프로

사전view ATTACK SHARK X85 기계식 키보드 사용 설명서
ATTACK SHARK X85 75% 가스켓 마운트 핫스왑 가능 기계식 키보드의 사양, 설정, 사용법 및 문제 해결 방법을 모두 다룬 종합 사용자 설명서입니다.
사전view 어택 샤크 AK832 초슬림 기계식 키보드 - 사용 설명서 및 사양
스마트 스크린과 USB Type-C, 블루투스 5.0, 2.4GHz 무선 연결 등 다양한 연결 옵션을 갖춘 초슬림 기계식 키보드, ATTACK SHARK AK832를 만나보세요. 이 문서에서는 자세한 사양과 기능을 제공합니다.
사전view 어택샤크 R5 울트라 게이밍 키보드 사용 설명서
ATTACK SHARK R5 Ultra는 핫스왑 기능을 갖춘 60% 게이밍 키보드로, 3가지 모드의 무선 연결과 PBT 키캡을 제공합니다. 이 가이드를 통해 설정, 기능 및 사용자 지정 방법에 대해 알아보세요.
사전view 어택 샤크 AKS068 유선 기계식 게이밍 키보드 사용 설명서
Attack Shark AKS068 유선 기계식 게이밍 키보드의 상세 사용자 설명서입니다. 65% Alice 레이아웃, 핫스왑 스위치, 가스켓 마운트, RGB 백라이팅, VIA 프로그래밍 기능, Windows 및 macOS와의 호환성에 대해 알아보세요.
사전view Attack Shark M71 무선 키보드 사용 설명서
Attack Shark M71 무선 키보드의 포괄적인 사용 설명서입니다. 2.4G, 블루투스 및 유선 모드의 사양, 작동, 연결 및 문제 해결 방법을 자세히 설명합니다. RGB 조명 및 핫스왑 가능 스위치에 대한 정보도 포함되어 있습니다.
사전view 어택 샤크 M86 트라이모드 가스켓 기계식 키보드 사용 설명서
Attack Shark M86 Tri-Mode Gasket 기계식 키보드의 기능, 설정 및 사용법을 자세히 설명하는 사용자 설명서입니다.