소개
This manual provides detailed instructions for the installation, operation, and maintenance of your CNBINGO MT-WK Rotary Knob Digital Room Thermostat. Please read this manual thoroughly before installation and use to ensure proper function and safety. This thermostat is designed to regulate the temperature of various heating systems, including electric heating, hot water heating, and water/gas boilers, ensuring a comfortable indoor climate.
Figure 1: CNBINGO MT-WK Rotary Knob Digital Room Thermostat with external sensor.
The CNBINGO MT-WK thermostat is a flush-mounted device featuring a rotary knob for temperature control and an integrated sensor, with an option for an external sensor. It supports a maximum current of 16A and voltag110-230V의 e.
안전 정보
- 설치는 해당 지역의 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 온도 조절 장치를 설치하거나 정비하기 전에 항상 회로 차단기의 전원을 분리하세요.
- Do not expose the thermostat to water or excessive moisture. The device has an IP20 rating, suitable for indoor use.
- 모든 배선 연결이 안전하고 적절하게 절연되어 단락을 방지하세요.
- The thermostat housing is made of flame-retardant PC material for safety.
제품 끝view
The CNBINGO MT-WK thermostat features a simple and intuitive design for temperature control.
Figure 2: Thermostat Components.
- PC Material: Durable and flame-retardant housing.
- 상태 LED : Indicates heating status (red when active).
- 온도 조절기: Rotary knob for setting and calibrating temperature.
- 켜기/끄기 스위치: Slider switch to power the thermostat on or off.
- 온도 표시 : Scale around the rotary knob indicating the set temperature.
설정 및 설치
1. 배선도
Refer to the following diagram for correct wiring connections. This thermostat is compatible with electric heating, hot water heating, and water/gas boiler systems.
Figure 3: Wiring Diagram and Compatible Devices.
- L: 활선 연결.
- N: 중성선 연결.
- 외부 센서 : Connect the provided 3-meter external sensor cable if required.
2. 센서 선택
The thermostat includes both a built-in aluminum sensor and a 3-meter external temperature sensor. You can choose to use one or both depending on your specific needs.
Figure 4: Built-in vs. External Sensor Usage.
- 내장 센서 : Ideal for smaller rooms where uniform temperature distribution is expected. The sensor is integrated directly into the thermostat unit.
- 외부 센서 : Recommended for larger rooms or areas where the thermostat's location might not accurately reflect the room's overall temperature. The 3-meter cable allows for flexible placement.
3. 장착 요구 사항
The thermostat is designed for flush-mounting in a standard wall box.
Figure 5: Product Dimensions and Wall Box Requirements.
- 치수: The thermostat measures 86mm x 86mm x 55mm.
- Wall Box: Mount in a standard wall box with a diameter of 60mm.
- 깊이: The depth of the device box should be at least 35mm to accommodate the thermostat.
작동 지침
1. 전원 켜기/끄기
Use the slider switch on the thermostat to turn the unit on or off.
2. 온도 조절
To set the desired temperature, rotate the central knob. The temperature can be precisely set to 0.5°C increments within a range of 5°C to 40°C.
Figure 6: Temperature Adjustment Knob.
3. 온도 교정
If the temperature displayed on the thermostat deviates from the actual room temperature, you can calibrate it by gently turning the rotary knob until it matches the accurate reading from another thermometer.
4. LED 표시등
The thermostat is equipped with an LED indicator light that provides visual feedback on its operational status.
Figure 7: LED Indicator.
- 적색 LED : The LED lights up red when the heating system is actively engaged and providing heat.
- LED 꺼짐 : The LED is off when the heating system is not active or the thermostat is powered off.
유지
The CNBINGO MT-WK thermostat requires minimal maintenance.
- 청소: 온도 조절기 표면을 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 점검: Periodically check for any visible damage or loose connections. If any issues are found, consult a qualified electrician.
문제 해결
온도 조절 장치에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
- 온도 조절기가 켜지지 않음:
- Check the main power supply to the thermostat.
- Ensure the on/off slider switch is in the 'on' position.
- 배선 연결이 단단히 되어 있는지 확인하십시오.
- Heating not turning on:
- 설정 온도가 현재 실내 온도보다 높은지 확인하십시오.
- Check if the red LED indicator is lit. If not, the thermostat is not calling for heat.
- Verify the heating system (boiler, electric heater) is operational.
- 잘못된 온도 측정:
- Calibrate the thermostat by adjusting the rotary knob to match a known accurate thermometer.
- Ensure the sensor (internal or external) is not obstructed or exposed to drafts/direct sunlight.
명세서
| 특징 | 사양 |
|---|---|
| 모델 번호 | MT-WK |
| 권tage | 110-230볼트(AC) |
| 최대 전류 | 16A |
| 전원 유형 | AC |
| 온도 조절 범위 | 5°C - 40°C |
| 온도 정확도 | 0.5도 |
| 센서 | Built-in aluminum sensor, 3m external sensor |
| 보호 등급 | IP20 |
| 제품 크기(L x W x H) | 8.3 x 8.3 x 5.5cm |
| 무게 | 0.2 킬로그램 |
| 색상 | 하얀색 |
보증 및 지원
For warranty information or technical support, please contact CNBINGO customer service. Refer to your purchase documentation for specific warranty terms.
제조업체: 씨엔빙고
모델: MT-WK
For further assistance, please visit the official CNBINGO web사이트를 방문하거나 현지 유통업체에 문의하세요.
