TRU COMPONENTS TC-Q200 2-Channel Industrial Radio Control User Manual

1. 서론

This manual provides essential information for the safe and efficient operation of your TRU COMPONENTS TC-Q200 2-Channel Industrial Radio Control system. This device is designed for controlling motors, vehicles, or machinery across two independent channels. Please read this manual thoroughly before installation and use, and keep it for future reference.

2. 안전 지침

• 설치, 유지보수 또는 문제 해결 작업을 수행하기 전에 항상 전원 공급 장치를 차단하십시오.
• This device operates with 10-30 V AC/DC. Verify your power source matches these requirements.
• Do not expose the unit to extreme temperatures, moisture, or corrosive environments.
• Only qualified personnel should perform installation and wiring to prevent electrical shock or damage to the equipment.
• 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
• 제품을 직접 개조하거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.

3. 제품 오버view

The TRU COMPONENTS TC-Q200 is a robust industrial radio control system designed for reliable remote operation. It features a durable GFK housing and advanced communication protocols.

Image showing the TRU COMPONENTS TC-Q200 2-channel industrial radio control unit, featuring its robust housing and compact design.

주요 특징:

• 2채널 제어: Enables independent control of two separate functions or devices.
• 작동 버튼: Equipped with 2 buttons for single-speed control.
• 주파수 범위: Operates within 433.88 - 433.95 MHz for stable communication.
• 확장된 범위: Provides a reliable operating range of over 100 meters (approximately 328 feet).
• 보안 통신: Features an automatic channel search function and over one million unique ID codes to ensure secure and interference-free communication between the transmitter and receiver.
• 견고한 하우징: Encased in a durable GFK (Glass Fiber Reinforced Plastic) housing for industrial environments.
• 전원 공급 장치: The receiver operates on a versatile 10 - 30 V AC/DC power input.

4. 설정

4.1. 개봉 및 검사

1. Carefully unpack all components and verify that all parts are present and undamaged.
2. If any damage is found, do not proceed with installation and contact your supplier.

4.2. 수신기 배선

1. Ensure the power source is OFF before making any connections.
2. Connect the receiver to a 10-30 V AC/DC power supply according to the wiring diagram provided with the product (refer to product packaging or separate wiring instructions).
3. Connect the output channels of the receiver to the motors, vehicles, or machinery you intend to control. Ensure correct polarity and load capacity.
4. Secure all wiring connections to prevent accidental disconnection or short circuits.

4.3. Pairing (Automatic Channel Search)

The receiver is equipped with an automatic channel search function. Typically, the transmitter and receiver are pre-paired from the factory. If re-pairing is necessary, follow these general steps:

1. 수신기의 전원을 켭니다.
2. Activate the pairing mode on the receiver (refer to specific instructions provided with the product, usually a button press or sequence).
3. Activate the transmitter (e.g., press a button) to initiate the pairing process.
4. The receiver will automatically search for and establish a secure connection with the transmitter using its unique ID code.

5. 사용 설명서

Once the system is properly installed and paired, operating the TRU COMPONENTS TC-Q200 is straightforward.

• 전원 켜기: Ensure the receiver is powered on and the transmitter has fresh batteries (if applicable).
• Channel 1 Control: Press and hold the designated button on the transmitter for Channel 1 to activate the corresponding output on the receiver. Release the button to deactivate.
• Channel 2 Control: Press and hold the designated button on the transmitter for Channel 2 to activate the corresponding output on the receiver. Release the button to deactivate.
• 범위: Maintain a clear line of sight between the transmitter and receiver for optimal performance. The effective range is over 100 meters. Obstacles may reduce this range.

6. 유지관리

• 청소: 제품을 깨끗하게 유지하고 먼지와 이물질이 쌓이지 않도록 하십시오. 청소할 때는 부드럽고 마른 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오.
• 배터리 교체(송신기): If the transmitter uses batteries, replace them regularly or when the indicator light shows low power. Use only the specified battery type.
• 점검: Periodically inspect all wiring and connections for signs of wear, damage, or corrosion. Tighten any loose connections.
• 환경 보호: Ensure the unit remains protected from harsh environmental conditions as specified in the product's technical data.

7. 문제 해결

If you encounter issues with your radio control system, refer to the following common problems and solutions:

• 수신자로부터 응답이 없습니다.
  • Check if the receiver is properly powered (10-30 V AC/DC).
  • Ensure the transmitter batteries are not depleted.
  • Verify that the transmitter and receiver are paired. If not, perform the pairing procedure.
  • Check for any physical obstructions or excessive distance between the transmitter and receiver.
• 간헐적 제어:
  • Check for sources of radio interference in the operating environment.
  • Ensure the transmitter and receiver antennas (if external) are properly positioned and undamaged.
  • The range might be at its limit; try operating closer to the receiver.
• 한 채널이 작동하지 않습니다.
  • Verify the wiring for that specific channel's output.
  • Test the connected device (motor/machine) independently to ensure it is functional.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원 센터 또는 자격을 갖춘 기술자에게 문의하십시오.

8. 사양

9. 보증 및 지원

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or service inquiries, please contact TRU COMPONENTS customer service through their official website or the contact details provided with the product.