XLX 3.7V Cordless Electric Screwdriver Instruction Manual

1. 서론

Welcome to the instruction manual for your XLX 3.7V Cordless Electric Screwdriver. This versatile tool is designed for various home repair and DIY projects, offering convenience and efficiency. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. 중요 안전 지침

화재, 감전, 신체 상해의 위험을 줄이려면 전기 도구를 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.

• 작업 공간을 깨끗하고 밝게 유지하세요. 어수선하거나 어두운 공간은 사고를 초래합니다.
• 가연성 액체, 가스 또는 먼지가 있는 폭발성 분위기에서 전동 공구를 작동하지 마십시오. 전동 공구는 먼지나 연기를 점화할 수 있는 불꽃을 생성합니다.
• 전동 공구를 작동하는 동안 어린이와 주변 사람을 멀리하십시오. 주의가 산만해지면 제어력을 잃을 수 있습니다.
• Wear appropriate personal protective equipment, including eye protection, hearing protection, and suitable gloves.
• 실수로 공구가 작동하지 않도록 주의하세요. 배터리 팩에 연결하거나 공구를 들어 올리거나 운반하기 전에 스위치가 꺼져 있는지 확인하세요.
• Do not overreach. Maintain proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• 조정을 하거나 액세서리를 교체하거나 전동 공구를 보관하기 전에 전동 공구에서 배터리 팩을 분리하십시오. 이러한 예방적 안전 조치는 전동 공구가 우발적으로 작동할 위험을 줄여줍니다.
• 사용하지 않는 전동 공구는 어린이의 손이 닿지 않는 곳에 보관하고 전동 공구나 본 사용 설명서에 익숙하지 않은 사람이 전동 공구를 작동하지 않도록 하세요.
• 전동 공구와 액세서리를 유지 관리합니다. 움직이는 부품의 정렬 불량이나 바인딩, 부품 파손 및 전동 공구 작동에 영향을 줄 수 있는 기타 조건을 확인합니다. 손상된 경우 사용하기 전에 전동 공구를 수리합니다.
• 이러한 지침에 따라 전동 공구, 액세서리 및 공구 비트 등을 사용하고 작업 조건과 수행할 작업을 고려하십시오. 의도한 작업과 다른 작업에 전동 공구를 사용하면 위험한 상황이 발생할 수 있습니다.
• 스위치가 켜지고 꺼지지 않으면 도구를 사용하지 마십시오. 스위치로 제어할 수 없는 전동 공구는 위험하므로 수리해야 합니다.
• Do not abuse the charging cable. Never use the cable for carrying, pulling or unplugging the power tool. Keep cable away from heat, oil, sharp edges or moving parts.
• 전동 공구를 비나 습한 환경에 노출시키지 마십시오. 전동 공구에 물이 들어가면 감전 위험이 커집니다.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1x XLX Cordless Electric Screwdriver
• 1x USB-Type C Charging Cable
• 12x Screwdriver Bits (compatible with Phillips, Slotted, and Hex screws)
• 1x Magnetic Screwdriver Extender (24MM/50MM)

This image displays all components included in the XLX 3.7V Cordless Electric Screwdriver package: the screwdriver unit, a USB-Type C charging cable, a set of 12 versatile screwdriver bits, and a magnetic screwdriver extender.

4. 제품 특징

• Powerful & Cordless Lithium-Ion Battery: Equipped with a 900mAh rechargeable lithium-ion battery (3.7V DC), this electric screwdriver delivers long-lasting performance with a 3–5-hour charging time via USB-Type C (cable included). Enjoy cordless convenience for home repairs without frequent recharging.
• High Torque & Precision Control: Boasts 3.0N.m max electric torque and 10.0N.m manual torque for tackling stubborn screws, paired with a 245RPM speed for efficient yet controlled driving. Perfect for appliances, electronics, furniture, and DIY projects.
• 12 Versatile Bits + Dual-Length Shafts: Includes 12 screwdriver bits (compatible with Phillips, slotted, and hex screws) and two magnetic extension shafts (24MM/50MM) to fit tight spaces or deep recesses. A complete toolkit for diverse repair needs.
• Built-in LED Light for Dark Spaces: The integrated LED light illuminates dimly lit work areas (e.g., under cabinets, car interiors, or electrical panels), ensuring accuracy even in low-light conditions.
• 컴팩트하고 인체공학적인 디자인: Lightweight and pocket-sized for easy handling, with a non-slip grip for comfort during prolonged use. Ideal for professionals and home users alike.

This image demonstrates the integrated LED light illuminating a screw in a dark cabinet, highlighting its utility in low-light conditions.

This image shows key features of the screwdriver: the USB charging port, hook rings for portability, and the direction buttons for forward and reverse operation.

This image illustrates the compact and portable design of the XLX electric screwdriver, easily fitting into a pocket for convenient transport.

5. 설정

5.1 배터리 충전

Before first use, or when the battery is low, charge the screwdriver:

1. Locate the USB-Type C charging port on the screwdriver.
2. Connect the provided USB-Type C cable to the screwdriver and a compatible USB power source (e.g., wall adapter, computer USB port).
3. Allow 3-5 hours for a full charge. The indicator light will typically illuminate during charging and change or turn off when fully charged.

5.2 드라이버 비트 부착하기

To prepare the screwdriver for use:

1. Select the appropriate screwdriver bit for your task from the included 12-piece set.
2. Insert the bit firmly into the magnetic chuck at the front of the screwdriver. Ensure it is seated securely.
3. For reaching screws in tight or deep spaces, first insert one of the magnetic extension shafts into the chuck, then insert the desired bit into the extender.

6. 사용 설명서

6.1 정방향 및 역방향 작동

The screwdriver features two direction buttons for driving and removing screws:

• 를 누르세요 앞으로 버튼 (usually indicated by an arrow pointing away from the handle) to drive screws in.
• 를 누르세요 reverse button (usually indicated by an arrow pointing towards the handle) to remove screws.

6.2 LED 조명 사용하기

The integrated LED light automatically activates when either the forward or reverse button is pressed, providing illumination for your work area, especially in dimly lit conditions.

6.3 수동 조작

For stubborn screws or when more precise control is needed, the screwdriver can also be used manually. Simply hold the screwdriver firmly and turn it by hand. The maximum manual torque is 10.0N.m, allowing you to apply additional force beyond the electric motor's capacity.

This image illustrates the wide range of applications for the XLX electric screwdriver, including assembling furniture, working on electronics, and general home repairs.

7. 유지관리

적절한 유지 관리는 드라이버의 수명과 최적의 성능을 보장합니다.

• 청소: Wipe the screwdriver with a dry, soft cloth after each use. Do not use harsh chemicals, abrasive cleaners, or immerse the tool in water.
• 저장: Store the screwdriver and its accessories in the provided case in a dry, cool place, away from direct sunlight, moisture, and extreme temperatures.
• 배터리 관리 : To prolong battery life, avoid fully discharging the battery frequently. Recharge the battery periodically (e.g., every 3-6 months) even if the tool is not in regular use.
• 비트 유지 관리: Keep screwdriver bits clean and free of debris. Replace worn or damaged bits to ensure effective operation and prevent damage to screw heads.

8. 문제 해결

일반적인 문제와 해결 방법은 아래 표를 참조하세요.

9. 사양

Technical details for the XLX 3.7V Cordless Electric Screwdriver:

10. 보증 및 고객 지원

For warranty information or technical support regarding your XLX 3.7V Cordless Electric Screwdriver, please refer to the product packaging or contact XLX customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.