Radiomaster Boxer 2.4G 16ch ELRS Transmitter Instruction Manual

1. 서론

The Radiomaster Boxer is a compact, ergonomic, and powerful radio control transmitter designed for precision control in various RC applications. It features full-size Hall effect gimbals and an intuitive button layout, making it an ideal choice for pilots seeking comfort and functionality without compromising on size.

This transmitter comes preinstalled with the EdgeTX operating system, leveraging cutting-edge software with class-leading hardware. It is available with an internal 2.4GHz ExpressLRS (ELRS) module, offering high-power, fan-cooled operation for reliable long-distance control, minimal latency, and high refresh rates. Alternatively, a 4-in-1 Multi-module (CC2500, NRF24L01, A7105, CYRF6936) or CC2500-only version is also available.

The Boxer is powered by a robust STM32F407VGT6 processor with 1MB Flash and 192KB RAM, ensuring smooth performance. Its oversized battery compartment accommodates a 2S 6200mAh pack, providing up to 20 hours of operation (batteries not included).

2. 안전 정보

Please refer to this instruction manual before using the Radiomaster Boxer transmitter. Adhere to all safety guidelines to ensure safe operation and prevent damage to the device or injury to yourself and others.

• Always ensure the antenna is properly installed before powering on the radio.
• Use only compatible batteries and charging devices.
• Do not disassemble or modify the transmitter.
• Keep the device away from water and extreme temperatures. This device is not water-resistant.
• Always check for throttle and switch warnings before flight.

3. 상자 안에 무엇이 들어있나요?

Image: Radiomaster Boxer Transmitter with its included carry case and accessories.

Your Radiomaster Boxer package includes the following items:

• 1 x Radiomaster BOXER Radio Transmitter
• 1 x Signature Carry Case
• 1 x T Antenna
• 1 x USB-C 케이블
• 짐벌 보호대 1개

4. 설정

4.1. 안테나 설치

Before powering on your Radiomaster Boxer, ensure the T-shaped antenna is securely installed. The antenna screws into the connector located at the top rear of the transmitter.

Image: Proper installation of the T-shaped antenna.

4.2. 배터리 설치

The Radiomaster Boxer features an oversized battery compartment designed to accommodate a 2S 6200mAh Li-Po battery pack for extended use. Batteries are not included and must be purchased separately. The transmitter also supports a battery pack for AA batteries as an alternative.

이미지: 후면 view of the transmitter with the battery compartment.

배터리를 설치하려면 :

1. 송신기 뒷면의 배터리 덮개를 엽니다.
2. Connect the battery's power connector to the corresponding port inside the compartment.
3. 배터리를 조심스럽게 배터리 칸에 넣으세요.
4. Close the battery compartment cover, ensuring it clicks securely into place.

4.3. SD 카드 슬롯

The transmitter includes a redesigned SD card slot with a pre-loaded SD card. This is essential for the EdgeTX operating system and for storing model configurations and other data.

Image: Location of the SD card slot.

5. 사용 설명서

5.1. 전원 켜기 / 끄기

To power on the transmitter, press and hold the power button located centrally above the screen until the boot sequence begins and the screen displays 'EdgeTX'. To power off, press and hold the power button again until the shutdown sequence completes.

5.2. 통제view

The Radiomaster Boxer features a comprehensive set of controls for precise operation:

Image: Detailed diagram of the Radiomaster Boxer's controls.

• 짐발: Full-size Hall effect gimbals provide smooth and precise control for pitch, roll, yaw, and throttle.
• 스위치: Multiple switches (SA, SB, SC, SD, SE, SF) are available for various functions, including momentary and latching types.
• 버튼: Dedicated buttons for SYS (System), RTN (Return), PAGE+/- (Page Navigation), and TELE (Telemetry) allow for easy menu navigation and function access.
• 스크롤 휠: A scroll wheel on the right side facilitates quick navigation through menus and settings.
• 트림 버튼: Fine-tune control inputs using the trim buttons located around the gimbals.

5.3. EdgeTX Operating System

The EdgeTX operating system offers extensive customization and functionality. Use the SYS button to access system settings, and the PAGE buttons and scroll wheel to navigate through menus and adjust parameters. Refer to the official EdgeTX documentation for detailed instructions on advanced features and model setup.

6. 유지관리

• 청소: Use a soft, dry cloth to clean the transmitter's exterior. Avoid using harsh chemicals or solvents.
• 저장: Store the transmitter in its included carry case in a cool, dry place when not in use. Remove the battery if storing for extended periods.
• 펌웨어 업데이트: Regularly check the Radiomaster website for firmware updates for the EdgeTX operating system to ensure optimal performance and access to new features.
• 짐벌 관리: The Hall effect gimbals are designed for durability, but avoid exposing them to excessive dust or debris. The included gimbal protector should be used during transport.

7. 문제 해결

• 송신기가 켜지지 않음: Ensure the battery is correctly installed and fully charged. Check the battery connections.
• 수신기에 신호가 없습니다. Verify that the internal module (ELRS, 4-in-1, or CC2500) is correctly configured and bound to your receiver. Check antenna connection.
• Switch/Throttle Warning: If a warning appears on the screen, ensure all switches are in their default positions and the throttle stick is at its lowest point before powering on.
• 화면 문제: If the screen is unresponsive or displaying incorrectly, try restarting the transmitter. If the issue persists, consult the EdgeTX documentation or Radiomaster support.

8. 사양

Image: Radiomaster Boxer dimensions: 235mm height, 178mm width, 76.7mm depth.

9. 보증 및 지원

보증 정보 및 기술 지원에 대해서는 공식 Radiomaster 웹사이트를 참조하십시오. web웹사이트를 방문하거나 공인 대리점에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

Online resources, including firmware updates and detailed manuals, are often available on the manufacturer's web대지.