Evenflo Revolve180 LiteMax NXT 유아용 카시트 사용 설명서

소개

This manual provides detailed instructions for the safe and proper use, installation, and maintenance of your Evenflo Revolve180 LiteMax NXT Rotational Infant Car Seat. Designed for infants weighing 3-30 lbs (15.7-32 inches), this car seat integrates advanced features for ease of use and enhanced safety. Please read all instructions carefully before using the car seat.

Image: The Evenflo Revolve180 LiteMax NXT Infant Car Seat, highlighting its 180-degree rotation capability for easy access.

주요 특징:

• 180° 회전: One-hand rotation makes getting your child in and out of the car seat easier.
• SensorySoothe™ Technology: Integrated lights, music, and sounds in the handle to calm your baby, controllable via the Evenflo app or car seat controls.
• SensorSafe® Technology: Real-time alerts for four potentially unsafe conditions: unsafe ambient temperature, child unattended, child buckled too long, and unexpected chest clip unbuckling.
• LockStrong™ Belt Tensioning System: Provides solid and secure installation.
• SecureTight™ Technology: Facilitates a tighter installation with up to 50% less effort.
• Green & Gentle™ Fabric: Plush, sustainable fabric made from recycled plastic bottles, free of added chemicals and flame retardants.

안전 정보

The Evenflo Revolve180 LiteMax NXT car seat meets or exceeds all applicable federal safety standards, including federal side impact standards effective in June 2025. In addition to federally required testing, this car seat undergoes structural integrity testing, rollover testing, and temperature testing to ensure maximum safety.

SensorSafe® Alerts:

The integrated SensorSafe technology provides critical alerts to help prevent unsafe situations:

• Unsafe Ambient Temperature: Alerts if the car's temperature is too hot or too cold for the child.
• Child Unattended: Notifies you if the child is left in the vehicle.
• Child Buckled Too Long: Reminds you to take breaks on long journeys.
• 예기치 않은 가슴 버클 풀림: Alerts if the child unbuckles the chest clip during travel.

Image: A baby secured in the car seat, demonstrating the SensorSafe chest clip and its connection to a mobile app for safety alerts.

설정 및 설치

Proper installation is crucial for your child's safety. Always refer to your vehicle's owner's manual for specific car seat installation instructions and locations of LATCH anchors or seat belt paths.

기본 설치:

1. 베이스 위치 지정: 카시트 받침대를 차량 좌석에 뒤쪽을 향하도록 놓으십시오.
2. LATCH 시스템 또는 안전벨트로 고정하십시오.
   • LATCH 시스템: 차량 하단 앵커에 LATCH 커넥터를 연결하십시오. 단단히 연결되었는지 확인하십시오.
   • 차량 안전벨트: 차량의 안전벨트(허리 벨트와 어깨 벨트)를 카시트 바닥의 지정된 벨트 경로를 통해 통과시키십시오.
3. LockStrong™ Belt Tensioning System: Utilize the LockStrong system to achieve a secure installation. Follow the indicators on the base to ensure the belt is properly tightened.
4. SecureTight™ Technology: This feature assists in achieving a tighter installation with reduced effort. Ensure the base is firmly secured and does not move more than one inch side-to-side or front-to-back at the belt path.
5. Adjustable SafeZone™ Load Leg (Sold Separately): If using the optional Load Leg accessory, extend it to the vehicle floor. This helps stabilize the seat base, limiting rotation and reducing crash forces. Ensure the indicator shows proper engagement.

Image: Demonstrating the LockStrong belt tensioning system for secure car seat base installation.

작동 지침

아이를 카시트에 앉히는 방법:

1. Rotate the Seat: Use the one-hand 180° rotation feature to turn the infant carrier towards the vehicle door for easy access.
2. Position the Child: 아기를 카시트에 앉힐 때, 아기의 등이 등받이에 완전히 밀착되도록 하십시오.
3. 하네스를 단단히 고정하세요: Fasten the 5-point harness system. Ensure the chest clip is at armpit level and the harness straps are snug against your child's shoulders and hips.
4. Rotate to Rear-Facing: Once your child is securely buckled, rotate the infant carrier back to the rear-facing position until it locks into place.

Image: A parent utilizing the 180-degree rotation feature to easily place an infant into the car seat.

SensorySoothe™ Technology:

The SensorySoothe feature helps calm your baby with integrated lights, music, and sounds. You can activate and customize this technology in two ways:

• Evenflo App: Download the Evenflo app to your smartphone. Connect to the car seat to customize soothing scenes, adjust light patterns, music, and sounds, and enable voice activation.
• Car Seat Controls: Use the dedicated buttons on the car seat handle to cycle through light and sound options.

Image: An infant observing the calming lights from the SensorySoothe technology integrated into the car seat handle.

리클라이닝 자세:

The car seat offers 5 recline positions to ensure your child's comfort and proper angle for safety. Refer to the indicators on the side of the car seat to select the appropriate recline for your child's age and weight.

유지

정기적인 청소와 관리는 카시트의 수명과 안전성을 보장합니다.

청소 지침:

• 플라스틱 및 금속 부품: Wipe clean with mild soap and water. Dry with a soft cloth. Do not lubricate or immerse any part of the child restraint in water unless specifically permitted for rinsing.
• 마구: 하네스는 순한 비누와 물로 닦아낼 수 있습니다. 하네스를 완전히 자연 건조시키십시오.
• 좌석 패드: 시트 패드는 찬물에 단독 세탁하고, 약한 세탁 코스로 세탁하세요. 낮은 온도로 10~15분간 건조하세요.

중요한: 카시트를 재조립하고 사용하기 전에 모든 부품이 완전히 건조되었는지 반드시 확인하십시오.

명세서

보증 및 지원

Evenflo is committed to providing safe and reliable products. For assistance with installation or any product-related inquiries, please contact the Evenflo ParentLink® Consumer Care Team. They offer online help in real-time, including live video support with a certified car seat safety technician to assist with proper vehicle installation.

Please refer to the product packaging or Evenflo's official web구체적인 보증 세부 사항과 연락처 정보는 해당 사이트를 참조하세요.