1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your GLEDOPTO ZigBee Pro+ 5-in-1 Smart LED Controller, Model GL-C-204P. This device is designed to control various types of LED strip lights within a smart home environment, supporting multiple configurations including RGBCCT, RGBW, RGB, CCT, and Dimmer modes. It operates with a DC 12-48V input and offers a maximum total output of 15A.
2. 안전 정보
- 권tage 호환성: 입력 볼륨을 확인하세요tage (DC 12-48V) and current of your power supply and LED strips are compatible with the controller's specifications. Exceeding the maximum total output current of 15A or 12A per channel can damage the device and connected lighting.
- 적절한 배선: Always ensure good contact between the wire and the terminal. Incorrect or loose wiring can lead to overheating or malfunction.
- 운영 환경: The controller is designed for indoor use within an operating temperature range of -20°C to +45°C. Avoid exposure to extreme temperatures, moisture, or corrosive environments.
- 허브 호환성: Please note that Tuya Zigbee hubs currently block third-party devices. This GLEDOPTO Zigbee product may not connect to Tuya hubs. Verify compatibility with your specific Zigbee hub before purchase and installation.
- 전문적인 설치: 배선 절차에 대해 확신이 서지 않는다면 자격을 갖춘 전기 기술자에게 문의하십시오.
3. 패키지 내용
- 1 x GLEDOPTO ZigBee Pro+ LED Strip Controller (Model GL-C-204P)
4. 제품 오버view
The GLEDOPTO ZigBee Pro+ controller offers versatile control for various LED strip types. Its compact design integrates essential functions for smart lighting systems.
이미지 4.1: 앞면 view of the GLEDOPTO ZigBee Pro+ 5-in-1 Smart LED Controller.
주요 특징:
- High Output Current: Total output current of 15A maximum, with a maximum of 12A per single channel, allowing for longer LED strip installations (e.g., 10-15 meters).
- 와이드볼tag전자 범위: Supports DC 12-48V input, compatible with a broad range of LED strips and panel lights.
- 5-in-1 기능: Configurable for RGBCCT, RGBW, RGB, CCT, or Dimmer LED strip types.
- 전원 켜짐 상태 메모리: Retains the last power-on state (on/off) or defaults to 'on' after a power interruption.
- Selectable PWM Frequency: Offers frequencies of 600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, and 8000Hz to match various power supplies and reduce potential noise. Default frequency is 1000Hz.
이미지 4.2: 상세 view of the controller highlighting its 15A maximum output, support for external push button switches, and quick wire connectors for easy wiring.
구성 요소:
Image 4.3: Diagram illustrating the key functions and components of the controller.
- 재설정 버튼: Used for switching PWM frequency (short press) or resetting the controller (long press for 5 seconds).
- 선택 버튼: Used for switching the current device function/mode (short press) or setting power-on status (long press for 5 seconds).
- Push Button Terminal: Connects to an external push button for power on/off (short press) and brightness adjustment (long press).
- 표시등: Displays different colors corresponding to the selected function mode.
5. 설정
5.1 배선 지침
The controller features quick-connect terminals for simplified wiring. Follow these steps for secure connections:
- 전선 준비: Strip approximately 10mm of insulation from the ends of your LED strip wires and power supply wires. The suggested wire type is 0.3-2mm² (22-14AWG).
- 오픈 커넥터: Gently open the connector lever upwards.
- 와이어 삽입: Insert the prepared wire into the appropriate terminal. Refer to the terminal labels for correct polarity and channel assignment (V+, R, G, B, W, C, V-).
- 보안 연결: Press the connector lever down to secure the wire. Give each wire a gentle tug to ensure it is firmly held.
Image 5.1: Step-by-step guide for using the quick connect port design for wiring.
5.2 ZigBee 허브와 페어링
This controller requires a compatible ZigBee hub for smart control. The pairing process typically involves:
- 전원 켜기: Connect the controller to a suitable DC 12-48V power supply.
- 페어링 모드 시작: Consult your ZigBee hub's instructions to put it into pairing mode.
- 컨트롤러 재설정: Short press the 'Reset' button on the controller or power cycle the controller (turn off and on) to initiate pairing. The indicator light may flash to confirm pairing mode.
- 페어링 확인: Once successfully paired, the controller will appear in your ZigBee hub's device list.
Important Note: If you change the device function mode using the 'OPT' button, the controller may need to be re-paired with your ZigBee hub.
6. 사용 설명서
6.1 Mode Selection (5-in-1 Functionality)
The controller supports five different LED strip configurations. Use the 'OPT' button to cycle through these modes:
- Short Press 'OPT': Switches the current device function. The indicator light will change color to reflect the selected mode:
| 표시등 색상 | 방법 |
|---|---|
| 하얀색 | RGB+CCT |
| 노란색 | RGBW |
| 파란색 | RGB |
| 녹색 | 한국어 |
| 빨간색 | 주차 |
Image 6.1: Visual representation of the 5-in-1 modes supported by the controller.
6.2 전원 켜짐 상태 설정
You can configure the controller's behavior after a power interruption:
- Long Press 'OPT' (more than 5 seconds): The indicator light will flash light blue three times. This action toggles between two power-on states:
- 마지막 상태를 기억하세요: The controller will resume its state (on/off) prior to the power failure.
- 기본적으로 켜짐: The controller will turn on automatically when power is restored.
Image 6.2: Illustration of the two optional power-on state settings.
6.3 Selectable PWM Frequency
Adjusting the PWM frequency can help match different power supplies and reduce audible noise (e.g., high-pitched whine) from the LED strips or power supply.
- Short Press 'Reset': Cycles through the available frequencies. The number of flashes of the indicator light corresponds to the selected frequency:
| 플래시 | 빈도 |
|---|---|
| 1 | 600Hz |
| 2 | 800Hz |
| 3 | 1000Hz(기본값) |
| 4 | 2000Hz |
| 5 | 4000Hz |
| 6 | 8000Hz |
Image 6.3: Diagram illustrating the selectable PWM frequencies and their corresponding indicator light flashes.
6.4 External Push Button Control
An external push button can be connected to the 'Push' terminals for basic control:
- 짧은 보도: 전원을 켜거나 끕니다.
- 길게 누르기 : Adjusts brightness. Release and long press again to change dimming direction (increases brightness, then decreases brightness).
7. 유지관리
- 청소: Use a dry, soft cloth to clean the controller. Do not use harsh chemicals or abrasive cleaners.
- 환경: Keep the controller in a dry, well-ventilated area, away from direct sunlight and sources of heat or moisture.
- 사이: Periodically check all wire connections to ensure they remain secure.
8. 문제 해결
- 컨트롤러가 응답하지 않음:
- 전원 공급 장치가 연결되어 있고 올바른 전압을 공급하고 있는지 확인하십시오.tage (DC 12-48V).
- 배선 연결부가 헐거워졌거나 극성이 잘못 연결되었는지 모든 배선 연결부를 점검하십시오.
- Try power cycling the controller (disconnect and reconnect power).
- If using a ZigBee hub, ensure the controller is properly paired. Re-pair if necessary.
- LED Strips Not Lighting Up or Flickering:
- Verify that the LED strip type matches the mode selected on the controller (RGBCCT, RGBW, RGB, CCT, Dimmer).
- Check the LED strip itself for damage or incorrect wiring.
- Ensure the total current draw of the LED strips does not exceed the controller's maximum output (15A total, 12A per channel).
- If flickering occurs, try adjusting the PWM frequency using the 'Reset' button.
- High-Pitched Noise:
- This can often be resolved by changing the PWM frequency. Short press the 'Reset' button to cycle through frequencies (600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, 8000Hz) until the noise is eliminated or reduced.
- 컨트롤러 과열:
- 즉시 전원을 차단하세요.
- Check if the total current draw of the connected LED strips exceeds the controller's maximum capacity (15A total).
- 컨트롤러 주변에 적절한 환기가 이루어지도록 하십시오.
- Verify that all wire connections are secure and not causing resistance.
- Cannot Connect to Tuya Hub:
- As stated in the safety information, Tuya Zigbee hubs may block third-party devices. This is a known compatibility issue. Consider using a different Zigbee hub (e.g., Home Assistant, Conbee) for full functionality.
9. 사양
Image 9.1: Detailed product parameters for the GLEDOPTO ZigBee Pro+ LED Controller.
| 매개변수 | 값 |
|---|---|
| 모델 번호 | GL-C-204P |
| 입력 Voltage | DC 12-48V |
| 출력 전류/채널 | 최대 12A |
| 총 출력 전류 | 최대 15A |
| 작동 온도 | -20°C ~ +45°C |
| 통신 프로토콜 | 지그비 + 2.4G RF |
| 권장 전선 종류 | 0.3-2mm² (22-14AWG) |
| 벗기는 길이 | 10mm |
| 재료 | 내화 PC |
| 순중량 | 54.2g |
| 총 중량 | 64.8g |
| 치수(길이 x 너비 x 높이) | 108 x 45 x 18mm(4.25 x 1.77 x 0.71인치) |
10. 보증 및 지원
GLEDOPTO products are designed for reliability and performance. For warranty information and technical support, please refer to the official GLEDOPTO web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
