1. 서론
This manual provides essential information for the safe and efficient operation of your VEVOR 3HP 2.2KW 5A 3-Phase 380V Variable Frequency Drive (VFD). Please read this manual thoroughly before installation, operation, or maintenance to ensure proper usage and prevent potential hazards. Keep this manual for future reference.
안전 예방 조치
- Always disconnect power before installation, wiring, or maintenance. Failure to do so can result in severe injury or death.
- Ensure proper grounding of the VFD and connected motor.
- 자격을 갖춘 인력만이 설치 및 배선 작업을 수행해야 합니다.
- Do not touch internal components immediately after power disconnection, as residual voltage가 존재할 수 있습니다. 콘덴서가 방전될 때까지 최소 5분 이상 기다리십시오.
- 입력 볼륨을 확인하세요tage matches the VFD's specifications (3-phase AC 380V).
2. 제품 오버view
The VEVOR VFD is designed to control the speed of 3-phase AC motors, offering precise control and energy efficiency. It features an intuitive control panel and robust protection mechanisms.
제어판 및 디스플레이
그림 2.1: VFD Control Panel Layout. This image shows the front panel of the VFD, highlighting the 4-digit LED display, speed adjustment knob, and various control buttons including RUN, STOP, ESC, SET, and arrow keys for navigation and parameter adjustment. A status indicator is also visible.
The VFD features a 4-digit LED display for real-time monitoring of frequency, voltage, current, and other parameters. The speed adjustment knob allows for easy manual frequency control. Buttons for RUN, STOP, ESC (exit menu), SET (enter menu/confirm), and arrow keys (up/down, left/right for parameter selection) provide comprehensive control.
보호 시스템
그림 2.2: VFD Protection Features. This image illustrates the VFD unit and lists its comprehensive protection capabilities, including overcurrent, overload, overvoltage, overheat, reverse power, ground short circuit, input phase-loss, output phase-loss, and inverter overload protections.
The VFD incorporates a robust 10-level multiple protection system to ensure safe and reliable operation. These protections include:
- 과전류 보호
- Overload Protection (Load Overload 100% and 150%)
- 오버볼tage 보호
- 과열 보호
- 역 전력 보호
- 접지 단락 보호
- 입력 위상 손실 보호
- 출력 위상 손실 보호
- 인버터 과부하 150% 보호
열 발산
그림 2.3: VFD Cooling System. This image highlights the VFD's internal components, including a large cooling fan and a multi-hole design on the casing, indicating features for efficient heat dissipation during operation.
For stable and long-term operation, the VFD is equipped with a powerful cooling fan and a multi-hole casing design. This ensures efficient heat dissipation, preventing overheating and extending the lifespan of the unit.
3. 사양
The following table details the technical specifications of the VEVOR VFD Model D100-2.2T4B-S:
그림 3.1: VFD Dimensions and Specifications. This image displays the physical dimensions of the VFD unit in both inches and millimeters, alongside a list of key specifications such as model number, horsepower, power, input current, input voltage, 출력 볼륨tage, input frequency, output frequency, main material, and net weight.
| 매개변수 | 값 |
|---|---|
| 모델 번호 | D100-2.2T4B-S |
| 힘 | 2.2kW (3HP) |
| 입력 전류 | 5아 |
| 입력 Voltage | 3-Phase AC 380V (±15%) |
| 출력 볼륨tage | 3-Phase AC 0-380V |
| 입력 주파수 | 50/60Hz |
| 출력 주파수 | 0-2000Hz |
| 치수(길이 x 너비 x 높이) | 8.99 x 15.01 x 11.76cm(3.54 x 4.65 x 5.91인치) |
| 순중량 | 1.1kg(2.43파운드) |
| 주요소재 | 난연 ABS |
| 장착 유형 | 벽걸이형 |
| 인증 | CE |
4. 설정
배선 지침
Proper wiring is crucial for the safe and correct operation of the VFD. Refer to the diagram below for terminal connections.
그림 4.1: VFD Wiring Diagram. This image illustrates the wiring connections for the VFD, showing a 3-phase AC 380V input connected to L1, L2, L3 terminals via a circuit breaker, and a 3-phase motor connected to U, V, W output terminals. The grounding terminal is also indicated.
- Input Power (L1, L2, L3): Connect the 3-phase AC 380V power supply to the L1, L2, and L3 input terminals. It is recommended to install a circuit breaker or fuse upstream for protection.
- 모터 출력(U, V, W): Connect the three phases of your 3-phase motor to the U, V, and W output terminals of the VFD.
- Grounding (GND): Connect the grounding terminal of the VFD to a reliable earth ground. This is essential for safety.
- 제어 터미널: If using external control signals (e.g., remote start/stop, external potentiometer), refer to the detailed wiring diagram in the full product manual for specific terminal assignments.
설치
The VFD is designed for wall mounting. Ensure the mounting surface is stable and can support the weight of the unit. Allow adequate clearance around the VFD for ventilation and heat dissipation. Avoid mounting in direct sunlight, high humidity, or dusty environments.
5. 사용 설명서
This section outlines the basic operation of the VFD. For advanced parameter settings, refer to the comprehensive manual provided with the product.
기본 동작
- 전원 켜기: After ensuring all wiring is correct and secure, apply power to the VFD. The LED display will illuminate.
- 속도 조정 : 회전하다 속도 adjustment knob on the control panel to set the desired output frequency (and thus motor speed). The display will show the current frequency in Hz.
- 시동 모터: 녹색을 누르세요 달리다 button to start the motor. The motor will accelerate to the set speed.
- 정지 모터: 빨간색을 눌러 멈추다 button to stop the motor. The motor will decelerate and come to a halt.
- 오류 재설정: In case of a fault (indicated by an error code on the display), address the underlying issue and then press the 정말로 button (often labeled as 'Break Down Fault Reset') to clear the fault and resume operation.
Menu Navigation and Parameter Setting
The VFD allows for detailed parameter configuration to optimize performance for specific applications. Use the 세트 button to enter the menu mode and the 키보드 button to exit. The arrow keys (up/down) are used to navigate through parameters, and the 세트 button is used to select a parameter and confirm changes. Consult the full manual for a complete list of parameters and their functions.
- 메뉴 진입: 누르다 세트.
- Navigating Parameters: Use the Up/Down arrow keys.
- Selecting/Editing Parameter: 누르다 세트. Use Up/Down to change value, then 세트 확인합니다.
- 메뉴 종료: 누르다 키보드 repeatedly until the main display is shown.
원격 제어 작동
The VFD supports remote control operation via a detachable panel or external control signals. Connect the remote panel to the corresponding interface. For external control, wire the appropriate terminals as per the detailed wiring diagrams in the full manual.
6. 유지관리
정기적인 유지관리는 VFD의 수명과 최적의 성능을 보장합니다.
- 청소: Periodically clean the VFD's exterior and ventilation openings to prevent dust accumulation, which can hinder heat dissipation. Use a soft, dry cloth. Do not use liquid cleaners.
- 점검: Regularly inspect all wiring connections for tightness and signs of damage or corrosion. Check for any unusual noises or odors during operation.
- 환경 조건: Ensure the VFD operates within its specified environmental conditions (temperature, humidity). Avoid exposure to corrosive gases or excessive vibrations.
- 팬 체크: Ensure the cooling fan is operating correctly and is free from obstructions.
7. 문제 해결
This section provides solutions for common issues. For complex problems or issues not listed here, contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모터가 시동되지 않습니다 | No power; Incorrect wiring; Fault condition; Parameter error | Check power supply; Verify wiring connections; Check for error codes and reset; Review 매개변수 설정. |
| VFD displays an error code | 과전류, 과전압tage, Overload, etc. | Identify the specific error code (refer to full manual); Address the cause (e.g., reduce load, check input voltage); Press F/R to reset. |
| Motor speed is unstable | Incorrect parameter settings; Motor load fluctuations; Poor wiring connection | Adjust acceleration/deceleration times; Check motor and load; Inspect wiring. |
| VFD overheats | Insufficient ventilation; Ambient temperature too high; Overload condition | Ensure proper airflow around VFD; Reduce ambient temperature; Reduce motor load. |
8. 보증 및 지원
VEVOR products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VEVOR web대지.
고객 지원
If you encounter any issues or have questions regarding your VEVOR VFD, please contact VEVOR customer support. Have your model number (D100-2.2T4B-S) and purchase information ready when contacting support for faster service.
- Web대지: www.vevor.com
- 이메일: 구체적인 지원 이메일 주소는 제품 설명서를 참조하십시오.
