1. 서론
This manual provides detailed instructions for the proper installation, operation, and maintenance of the GODIYMODULES High Voltage DC Converter Module Board. This module is designed to provide stable high voltage DC and filament voltage, suitable for applications such as powering Nixie tubes and Magic Eye tubes.
이미지 1.1: 위에서 아래로 view GODIYMODULES 고볼륨의tage DC Converter Module Board. This image shows the overall layout of the components, including capacitors, inductors, the DC input jack, and the terminal blocks for input and output connections.
2. 안전 정보
WARNING: This module generates high voltage. Improper handling can result in electric shock, injury, or damage to equipment. Always exercise extreme caution when working with high voltag전자 회로.
- Ensure the power supply is disconnected before making any connections or adjustments.
- Do not touch any components on the board when power is applied.
- 적절한 절연재와 안전 장비를 사용하십시오.
- Verify all connections are correct before applying power.
- This module is intended for experienced electronics hobbyists and professionals.
3. 특징
- Designed for Nixie and Magic Eye Tube anode and filament power supply.
- 조정 가능한 높은 볼륨tage DC output.
- Dedicated 6.3V filament voltag전자 출력.
- Compact board design.
4. 사양
| 매개변수 | 값 |
|---|---|
| 입력 Voltage | 직류 9V-12V |
| DC Socket Specification | 5.5*2.1 mm (Inner Positive, Outer Negative) |
| 높은 Voltage 출력 | DC 150V-280V / 15mA (Adjustable) |
| 필라멘트 Voltage 출력 | DC 6.3V/1500mA |
| 치수 | 약 5.24 x 3.82 x 1.34인치(패키지) |
| 무게 | 약 0.634온스 |
| 재료 | 금속, 플라스틱 |
5. 설정 및 연결
Follow these steps to correctly connect the High Voltage DC Converter Module Board to your system. Ensure all power is disconnected before proceeding.
5.1 입력 전원 연결
The module accepts a DC input voltage between 9V and 12V. There are two methods for providing input power:
- DC 전원 잭: Use a DC power adapter with a 5.5*2.1 mm plug. The plug must be inner positive and outer negative.
- 터미널 블록: Connect your DC 9V-12V power supply to the designated input terminals on the green screw terminal block. Observe correct polarity.
Image 5.1: Connection diagram showing input and output terminals. The DC 9-12V input can be connected via the barrel jack (5.5*2.1mm, inner positive, outer negative) or the screw terminal block. The image also indicates the output voltage regulation potentiometer.
Image 5.2: Detailed connection diagram illustrating the input power options (DC 9-12V via barrel jack or screw terminals) and the output connections for 6.3V filament voltage, GND, and adjustable DC 150-280V. The output voltage adjustment potentiometer is also clearly marked.
5.2 출력 연결
The module provides two main outputs via the green screw terminal block:
- DC 150V-280V Output: 이것이 높은 거래량이다tage output, adjustable via the onboard potentiometer. Connect the anode of your Nixie or Magic Eye tube to this output.
- DC 6.3V 출력: This output provides 6.3V for tube filaments. Connect the filament of your tube to this output.
- GND : Common ground connection for both outputs.
Ensure all connections are secure and correctly polarized before applying power.
6. 사용 설명서
6.1 전원 켜기
Once all connections are verified and secure, connect the DC 9V-12V power supply to the module. The module will immediately begin generating the output voltag에스.
6.2 Adjusting High Voltage 출력
높은 볼륨tage output (DC 150V-280V) is adjustable using the blue potentiometer located on the board. Use a small screwdriver to carefully turn the potentiometer:
- 선회 시계 방향으로 ~ 할 것이다 증가하다 출력 볼륨tage.
- 선회 반 시계 방향 ~ 할 것이다 감소하다 출력 볼륨tage.
Always use a multimeter to measure the output voltage while adjusting to prevent over-voltage damage to your connected components.
이미지 6.1: 상단 view of the module, clearly showing the blue potentiometer used for adjusting the high voltag전자 출력.
7. 유지관리
GODIYMODULES 고볼륨tage DC Converter Module Board is designed for reliable operation and requires minimal maintenance.
- 모듈을 깨끗하게 유지하고 먼지와 이물질이 없도록 하십시오.
- 모듈 주변의 환기를 충분히 확보하여 과열을 방지하십시오.
- 모듈을 습기나 극한 온도에 노출시키지 마십시오.
- Regularly inspect connections for looseness or corrosion.
8. 문제 해결
- 출력 없음tage:
- Verify the input power supply is connected and providing 9V-12V DC.
- Check the polarity of the input DC power plug (inner positive, outer negative).
- Ensure all output connections are secure.
- 잘못된 출력 볼륨tage:
- 대용량용tage output, adjust the potentiometer as described in Section 6.2.
- Use a multimeter to accurately measure the output voltag에스.
- 입력 볼륨을 확인하세요tage는 안정적이며 지정된 범위 내에 있습니다.
- 모듈 과열:
- Ensure adequate airflow around the module.
- Verify that the load connected to the outputs does not exceed the specified current limits (15mA for HV, 1500mA for 6.3V).
9. 지원
For further assistance or technical inquiries, please refer to the seller's contact information on the product purchase page or visit the GODIYMODULES official support channels.
