AsperX Portable Power Station User Manual
모델: AXP200
1. 서론
Thank you for choosing the AsperX Portable Power Station. This device is designed to provide reliable power for your electronic devices during outdoor adventures, travel, camping, emergencies, or as a home backup solution. It features a high-capacity LiFePO4 battery, multiple output ports, and advanced safety features to ensure stable and safe operation.
2. 안전 정보
중요한 안전 예방 조치:
- 장치를 분해, 수리 또는 개조하지 마십시오.
- 제품을 화기 또는 열원으로부터 멀리하십시오.
- 물이나 높은 습도에 노출되지 않도록 하십시오.
- 장치가 손상되었거나 떨어진 경우 사용하지 마십시오.
- 사용 및 충전 시에는 적절한 환기를 유지하세요.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
This power station utilizes LiFePO4 batteries, known for their stability and safety, and is equipped with a Battery Management System (BMS) offering 12 professional safety protections, including over-charge, over-current, short-circuit, low-temperature, high-temperature, over-voltage, 과부하 보호.
3. 제품 오버view
구성 요소 및 포트
The AsperX Portable Power Station (Model AXP200) is designed with user convenience and versatility in mind. Below is an overview of its main components and ports:
그림 3.1: 전면 view of the AsperX Portable Power Station, highlighting the display and ports.
- 디지털 디스플레이: Shows input power, output power, battery percentage, and remaining time.
- 전원 버튼: 기기를 켜거나 끕니다.
- LED 라이트 버튼: Activates and cycles through LED light modes.
- DC1 Input Port (20-60V/100W): For charging the power station via DC input.
- DC2 Output Port (12V/5A): For DC output to compatible devices.
- USB-C1 PD In/Out Port (140W): Bi-directional USB-C port for fast charging.
- USB-C2 PD In/Out Port (140W): Bi-directional USB-C port for fast charging.
- USB-A1 Output Port (18W): Standard USB-A output for charging devices.
- USB-A2 Output Port (18W): Standard USB-A output for charging devices.
- 통합 LED 조명: Retractable 3W LED light with multiple modes.
- 운반 손잡이: Durable strap for easy portability.
그림 3.2: 상세 view of the input and output ports on the power station.
4. 설정
초기 요금
Before first use, it is recommended to fully charge your AsperX Portable Power Station. This ensures optimal battery performance and longevity.
- Connect the provided USB-C to USB-C cable to one of the PD In/Out ports (USB-C1 or USB-C2) on the power station.
- Connect the other end of the cable to a compatible 140W PD3.1 USB-C wall charger (not included).
- The digital display will show the input power and battery charging status.
- Charging can also be done via a 100W solar panel or car socket (adapters not included).
Figure 4.1: Charging the power station via a wall adapter.
Note: Data measured by AsperX may deviate due to environmental variations. Ensure your charging cable supports 140W speeds for optimal performance.
5. 사용 설명서
출력 포트 사용
To power or charge your devices, simply connect them to the appropriate output port on the power station. The digital display will show the output power in watts.
- USB-C 포트(140W): 노트북, 태블릿, 스마트폰을 빠르게 충전하는 데 이상적입니다.
- USB-A 포트(18W): Suitable for charging a wide range of USB-powered devices.
- DC2 Output Port (12V/5A): For devices requiring a 12V DC input.
Figure 5.1: Multiple devices connected and charging from the power station.
LED 조명 작동
The integrated 3W LED light provides illumination for various situations. It has a stretchable design and four modes:
- Press the LED Light Button once for Normal Lightness.
- 다시 누르세요 Strong Lightness.
- 세 번째 누르세요 SOS 모드 (flashing signal).
- 네 번째로 누르세요 비상 스트로브.
- To turn off the light from any mode, press and hold the LED Light Button.
Figure 5.2: The power station's LED light in operation.
The LED light can provide illumination for up to 42.3 hours on a full charge, making it suitable for extended use during camping 또는 power outag에스.
6. 유지관리
- 직사광선을 피해 서늘하고 건조한 곳에 발전소를 보관하십시오.
- Charge the unit at least once every 3-6 months to maintain battery health, even if not in use.
- 외부를 부드럽고 마른 천으로 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
- 기기를 떨어뜨리거나 강한 충격을 주지 마십시오.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않음 | 배터리가 소진되었습니다. 전원 버튼을 제대로 누르지 않았습니다. | 기기를 충전하세요. 전원 버튼을 3초간 누르세요. |
| 기기가 충전되지 않음 | Output port not activated; Device cable faulty; Overload protection activated. | Ensure output is enabled; Try a different cable; Reduce connected load. |
| 충전 속도가 느림 | 케이블이 고전력을 지원하지 않습니다tage; Charger not powerful enough. | Use a 140W PD3.1 compatible cable; Use a higher wattag전자 충전기. |
| LED 조명이 작동하지 않음 | Light button not pressed correctly; Unit battery low. | Press and hold the light button; Charge the unit. |
If the problem persists, please contact AsperX customer support for assistance.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | AXP200 |
| 배터리 유형 | 인산철(LiFePO4) |
| 용량 | 60,000mAh(192Wh) |
| 총 출력 | 200와트 |
| USB-C 출력/입력 | 2 x 140W PD3.1 (Two-Way) |
| USB-A 출력 | 2 x 18W |
| DC 입력 | 20-60V / 100W |
| DC 출력 | 12V/5A |
| LED 조명 전원 | 3W |
| 치수 | 7.6 x 4.1 x 3.9 인치 |
| 무게 | 4.18파운드(1.9kg) |
| 안전 인증 | FCC, UL, CE, ROHS, PSE, UN38.3, etc. |
9. 보증 및 지원
AsperX provides a 12-Month Full Protection Plan covering defects in materials and workmanship. For any technical assistance or support, please contact our customer service team. You will receive 7x24 After-Sales Support.
패키지에 포함:
- 1 x AsperX Portable Power Bank Station
- 1 x High-Speed USB-C to USB-C cable
- 1 x 사용자 매뉴얼(이 문서)
