소개
Welcome to the user manual for your INTERPHONE Portable Air Compressor. This device is engineered for convenient and efficient inflation of motorcycle, car, and bike tires, and also features a power bank function for charging your electronic devices. Please read this manual thoroughly before use to ensure safe and optimal performance.
중요한 안전 정보
- 기기를 작동하기 전에 모든 지침을 반드시 읽고 이해하십시오.
- 기기를 어린이와 애완동물이 닿지 않는 곳에 보관하세요.
- 장치를 물이나 극한의 온도에 노출시키지 마십시오.
- Ensure the correct pressure is set for the item being inflated to prevent over-inflation, which can cause damage or injury.
- 환기가 잘 되는 곳에서 장치를 사용하십시오.
- 직접 기기를 분해하거나 수리하지 마십시오. 자격을 갖춘 서비스 담당자에게 도움을 요청하십시오.
- 해당 지역 규정에 따라 장치와 배터리를 책임감 있게 폐기하세요.
패키지 내용
다음 항목에 대한 상자를 체크해 주세요.
- INTERPHONE Portable Air Compressor
- USB-C 충전 케이블
- Inflation Nozzles/Adapters (e.g., for bicycle valves, ball needles)
- 사용자 설명서
제품 끝view
Familiarize yourself with the main components of your INTERPHONE Portable Air Compressor.
그림 1: 전면 View. This image displays the front of the portable air compressor, featuring a large digital display that shows pressure readings in PSI, BAR, and KPA. Below the screen are intuitive control buttons for operation.
그림 2: 뒤로 View. 후면 view of the device, highlighting the manufacturer's label with model information and the USB-C charging port.
그림 3: 측면 View with Hose. This image shows the side of the compressor where the integrated inflation hose is stored, ready for use.
설정
장치 충전하기
Before first use, fully charge the portable air compressor. Connect the provided USB-C cable to the charging port on the device and the other end to a suitable USB power adapter (not included). The battery indicator on the digital display will show the charging status. A full charge ensures optimal performance and standby time.
호스 연결
The device features an integrated inflation hose. Gently pull out the hose from its storage slot on the side of the compressor. Select the appropriate nozzle adapter for your tire valve (e.g., Presta, Schrader) and securely attach it to the end of the hose.
작동 지침
전원 켜기/끄기
장치를 켜려면 on, press and hold the power button (usually marked with a power symbol) for a few seconds until the display illuminates. To turn the device 끄다, press and hold the power button again until the display turns off.
압력 단위 설정
After powering on, you can cycle through the available pressure units (PSI, BAR, KPA) by briefly pressing the 'M' (Mode) or unit selection button. Select the unit appropriate for your needs.
목표 압력 설정
Use the '+' and '-' buttons on the control panel to adjust the desired target pressure. The dual backlit display will show the current pressure and the target pressure simultaneously. Refer to your vehicle's manual or tire sidewall for recommended pressure values.
인플레이션 과정
- Securely connect the inflation hose with the correct adapter to the tire valve. Ensure there are no air leaks.
- Once connected, the display will show the current tire pressure.
- Press the start/inflate button (often marked with a play symbol or a circle) to begin the inflation process.
- The compressor will automatically stop when the set target pressure is reached.
- 타이어 밸브에서 호스를 조심스럽게 분리합니다.
파워뱅크 기능
The INTERPHONE Portable Air Compressor can also function as a power bank. Locate the USB-A output port on the device. Connect your electronic device (e.g., smartphone, tablet) to this port using its charging cable. The compressor will then provide power to charge your device.
LED 조명 작동
The built-in LED light is useful for operating in low-light conditions or as an emergency light. Press the dedicated light button (or a multi-function button, refer to device markings) to turn the LED light on or off.
유지
Proper maintenance ensures the longevity and reliability of your air compressor.
- 청소: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the device.
- 저장: Store the compressor in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the integrated hose is properly retracted into its slot.
- 배터리 관리 : For long-term storage, charge the battery to approximately 50-70% every 3-6 months to maintain battery health. Avoid fully discharging the battery frequently.
문제 해결
If you encounter issues with your INTERPHONE Portable Air Compressor, refer to the table below for common problems and solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다. | 배터리가 부족하거나 방전되었습니다. | 제공된 USB-C 케이블을 사용하여 기기를 완전히 충전하세요. |
| Air is not inflating or inflating slowly. | Hose not securely connected to valve; incorrect nozzle adapter; hose kinked. | Ensure the hose is tightly screwed onto the tire valve. Check that the correct adapter is used and the hose is not bent. |
| 장치가 목표 압력에 도달하기 전에 멈춥니다. | Battery is low; internal safety mechanism (overheat protection). | Recharge the device. If the device feels hot, allow it to cool down for 15-20 minutes before resuming operation. |
| 화면에 오류 메시지가 표시됩니다. | Internal malfunction or sensor error. | 기기를 끄고 몇 초간 기다린 후 다시 켜세요. 오류가 지속되면 고객 지원팀에 문의하세요. |
명세서
Detailed technical specifications for the INTERPHONE Portable Air Compressor.
| 특징 | 사양 |
|---|---|
| 제조업체 | 셀룰라라인 스파 |
| 상표 | 내부 전화 |
| 모델 | 인터포에어펌프3K |
| 패키지 크기 | 18 x 12.1 x 4.1cm |
| 품목 무게 | 400g |
| Inflation Capacity | Up to 4 motorcycle tyres on a single charge |
| 인플레이션 시간 | Less than 4 minutes per tyre |
| 대기 시간 | 6개월 이상 |
| 압력 단위 | PSI, BAR, KPA |
| 추가 기능 | Power bank function, Built-in LED light, Integrated inflation tube, Dual backlit display, Auto-stop function |
보증 정보 및 고객 지원
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions regarding coverage and duration.
For technical support, service, or any inquiries regarding your INTERPHONE Portable Air Compressor, please visit the official Interphone web대지: