소개
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference. This switch is designed for use in both single-pole and 3-way circuits, allowing control of a light fixture from one or two locations.
이미지: 이상view of BESTTEN 3-Way Decorator Wall Light Switches with included wallplates.
안전 정보
경고: 감전 위험. 부적절한 설치는 심각한 부상이나 사망을 초래할 수 있습니다.
- Always turn off power at the circuit breaker or fuse box before wiring.
- Verify power is off before proceeding with installation.
- 모든 국가 및 지역 전기 규정에 따라 설치하십시오.
- 이 지침의 일부에 대해 확실하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하십시오.
- Do not use with loads exceeding the specified ratings (15A, 120V/277V).
- 이 장치는 실내에서만 사용하도록 설계되었습니다.
패키지 내용
- BESTTEN 3-Way Decorator Wall Light Switch(es)
- Matching Decorator Wallplate(s)
- 장착 나사
명세서
| 사양 | 값 |
|---|---|
| 모델 번호 | USP-LS03-10PK |
| 작동 모드 | 온-오프 |
| 현재 평가 | 15 Amps |
| 운영 볼륨tage | 120볼트 / 277볼트 |
| 연락처 유형 | 유지됨 |
| 커넥터 유형 | 나사 |
| 단말기 | 나사 |
| 회로 유형 | 3-way (also compatible with Single Pole) |
| 액추에이터 유형 | 흔들리는 것 |
| 제품 치수 | 2.91 x 4.69 x 1.28 인치 |
| 재료 | Impact-resistant polycarbonate thermoplastic and solid steel |
| 인증 | UL 인증 |
Image: Physical dimensions of the switch and wallplate.
설정 및 설치
Before beginning, ensure the power is OFF at the circuit breaker. This switch can be used for both single-pole and 3-way applications.
Wiring Terminals Overview
이미지: 자세한 뒷면 view of the switch illustrating screw and push-in terminals.
- Black Screw: Connects to the Hot/Line wire or the Hot/Load wire.
- 황동 나사: Connect to the Traveler wires in a 3-way circuit.
- 녹색 나사: Connects to the Ground wire.
- Quick Push-in Terminals: Accept 14 AWG solid copper wire only. Terminal screws accept up to 12 AWG.
3-Way Circuit Wiring Diagram
A 3-way switch allows control of a single light fixture from two different locations. This setup requires two 3-way switches.
Image: Standard 3-way wiring configuration.
- 전원 끄기: Locate the circuit breaker controlling the switch and turn it OFF. Verify power is off using a voltag전자 테스터.
- 전선 식별: In a 3-way setup, you will typically find a Hot/Line wire, a Hot/Load wire, two Traveler wires, and a Ground wire. Label them if necessary.
- 접지선을 연결하십시오: Connect the bare copper or green insulated ground wire from the wall box to the green ground screw on the switch.
- 여행자 전선을 연결하세요: Connect the two traveler wires to the two brass screws on the switch. Ensure consistency between both 3-way switches (e.g., if one traveler is connected to the top brass screw on the first switch, connect it to the top brass screw on the second switch).
- Connect Hot/Line or Hot/Load Wire: Connect the Hot/Line wire (from the power source) to the black screw on the first 3-way switch. Connect the Hot/Load wire (going to the light fixture) to the black screw on the second 3-way switch.
- 보안 스위치: Carefully fold the wires into the electrical box. Mount the switch to the box using the provided screws.
- 월플레이트 설치: Attach the decorator wallplate over the switch.
- 복원력 : 회로 차단기에서 전원을 다시 켜세요.
Single Pole Circuit Wiring
For single-pole applications, the switch controls a light fixture from one location. Connect the Hot/Line wire to one black screw and the Hot/Load wire to the other black screw. Connect the ground wire to the green screw. The brass screws are not used in a single-pole configuration.
작동 지침
The BESTTEN 3-Way Decorator Wall Light Switch features a simple rocker paddle for operation.
- Press the top of the paddle to turn the connected light fixture ON.
- Press the bottom of the paddle to turn the connected light fixture OFF.
Image: Switch installed in a room, demonstrating its aesthetic integration.
유지
- 청소: To clean the switch and wallplate, wipe with a soft, damp 천을 사용하십시오. 연마성 세제나 용제는 사용하지 마십시오. 청소하기 전에 전원이 꺼져 있는지 확인하십시오.
- 점검: Periodically inspect the switch and wallplate for any signs of damage or wear. If damage is observed, turn off power and replace the switch.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지거나 꺼지지 않습니다. | No power to the switch | 회로 차단기를 확인하고 켜져 있는지 확인하십시오. |
| 느슨하거나 잘못된 배선 | Turn off power. Recheck all wire connections according to the wiring diagram. Ensure wires are securely fastened to terminals. | |
| 전구가 고장났습니다 | 전구를 교체하세요. | |
| Switch feels loose in the wall box | Mounting screws are not tightened | Turn off power. Tighten the mounting screws that secure the switch to the electrical box. |
| Wallplate does not fit correctly | Switch not properly aligned or incorrect wallplate | Ensure the switch is centered and flush within the electrical box. Verify you are using the correct decorator-style wallplate. |
보증 및 지원
BESTTEN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN web대지.
For additional product information or to explore other BESTTEN electrical solutions, please visit the BESTTEN Store on Amazon.
