FUXTEC FX-EV360 전기식 폭기기 및 스카리파이어 사용 설명서

1. 서론

This manual provides essential instructions for the safe and effective operation, assembly, and maintenance of your FUXTEC FX-EV360 Electric Aerator and Scarifier. Please read this manual thoroughly before using the appliance to ensure proper function and to prevent injury or damage. Keep this manual in a safe place for future reference.

The FUXTEC FX-EV360 is designed to improve the health and appearance of your lawn by removing moss, thatch, and dry debris. It features a powerful 1500W motor, a 36 cm working width, and 5 adjustable depth levels for versatile lawn care.

2. 안전 지침

일반 안전 경고:

• Always wear appropriate personal protective equipment (PPE) such as safety glasses, sturdy footwear, and hearing protection when operating the machine.
• Ensure the work area is clear of stones, sticks, wires, and other debris that could be thrown by the machine.
• Keep children, pets, and bystanders at a safe distance (at least 5 meters) from the operating area.
• Never operate the machine in wet conditions or rain.
• Before performing any maintenance, cleaning, or when leaving the machine unattended, always disconnect it from the power supply.
• Inspect the power cord regularly for damage. If damaged, have it replaced by a qualified electrician.
• 부품이 손상되거나 누락된 경우 기계를 사용하지 마십시오.
• 일광 또는 좋은 인공 조명에서만 기계를 작동하십시오.
• Always maintain a firm grip on the handles and walk, do not run, while operating the machine.

전기 안전:

• 전원 공급 장치 볼륨을 확인하십시오.tage는 기계 라벨에 표시된 등급과 일치합니다.
• Use only extension cords suitable for outdoor use and rated for the machine's power consumption.
• Do not abuse the cord. Never carry the machine by the cord or yank it to disconnect from the outlet.
• 코드를 열, 기름, 날카로운 모서리 또는 움직이는 부품에서 멀리 두십시오.

3. 제품 오버view

The FUXTEC FX-EV360 is an electric aerator and scarifier designed for efficient lawn maintenance.

그림 1: 전면 view of the FUXTEC FX-EV360 Electric Aerator and Scarifier.

그림 2: 각도 view of the FUXTEC FX-EV360, highlighting the handle and collection bag.

그림 3: 밑면 view showing the roller mechanism and depth adjustment lever.

Figure 4: Close-up of the interchangeable roller with tines for scarifying or aerating.

주요 구성 요소:

• 모터 하우징 : 1500W 전기 모터가 포함되어 있습니다.
• 핸들바: Ergonomic design with quick-release clamps for easy adjustment and storage.
• Operating Switch: Power control for the motor.
• 깊이 조정 레버: Allows selection of 5 working depth levels.
• 컬렉션 가방: 45-liter capacity for collecting removed debris.
• 롤러: Interchangeable rollers for scarifying (blades) and aerating (spring tines).
• 바퀴: For easy maneuverability across the lawn.

4. 설치 및 조립

The FUXTEC FX-EV360 is designed for straightforward assembly. Follow these steps:

1. 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 손상되었거나 누락된 부품이 있는지 확인하세요.
2. 핸들바 어셈블리: Attach the lower handlebar sections to the main unit. Secure them using the provided screws or quick-release clamps. Then, attach the upper handlebar section, ensuring the operating switch and cable are correctly positioned and secured.
3. 롤러 설치: The unit typically comes with one roller pre-installed. If you need to change the roller (e.g., from scarifier to aerator), refer to the "Roller Replacement" section in Maintenance. Ensure the chosen roller is securely fastened before operation.
4. 수집 백 부착 장치: Hook the 45-liter collection bag onto the designated points at the rear of the machine. Ensure it is securely attached to prevent debris from escaping.
5. 케이블 관리 : Secure the power cable along the handlebar using the provided clips to prevent it from interfering with operation or getting damaged.

Note: While assembly is generally intuitive, always refer to the detailed diagrams in the printed manual for precise steps.

5. 사용 설명서

Before starting, ensure all safety instructions have been read and understood.

1. 준비:
   • Clear the lawn of any obstacles like stones, toys, or branches.
   • Mow the lawn to a short height (e.g., 2-3 cm) before scarifying or aerating for best results.
   • Ensure the lawn is dry. Operating on wet grass can clog the machine and reduce effectiveness.
2. Selecting Working Depth:
   • The FUXTEC FX-EV360 offers 5 adjustable depth levels, ranging from -12 mm to +10 mm.
   • Use the depth adjustment lever, typically located on the side of the machine, to select the desired depth.
   • For initial scarifying, start with a shallower depth and gradually increase if needed. For aeration, a deeper setting might be appropriate.
   • The '+' settings are for raking (light dethatching), while the '-' settings are for scarifying (deeper cutting).
3. 머신 시작:
   • Connect the machine to a suitable power outlet.
   • Press and hold the safety button (if present) and then squeeze the operating lever on the handlebar to start the motor.
   • The motor will start immediately.
4. 작업:
   • Push the machine forward at a steady, moderate pace. Avoid pushing too fast, which can reduce effectiveness, or too slow, which can overload the motor.
   • Overlap each pass slightly to ensure complete coverage of the lawn.
   • Empty the 45-liter collection bag regularly to maintain optimal performance and prevent clogging.
   • When turning, release the operating lever to stop the motor, lift the front of the machine slightly, pivot, and then restart.
5. 기계 정지:
   • 모터를 멈추려면 작동 레버를 놓으십시오.
   • Wait for the roller to come to a complete stop before moving away from the machine or performing any tasks.
   • Always disconnect the power cord after use.

6. 유지 관리 및 보관

Regular maintenance ensures the longevity and optimal performance of your FUXTEC FX-EV360.

1. 청소:
   • 사용 후에는 반드시 전원 공급 장치를 분리하십시오.
   • Clean the machine thoroughly, especially the roller and the underside of the housing, to remove grass, soil, and debris. Use a brush or a damp 천을 사용하십시오. 물줄기나 고압 세척기를 사용하지 마십시오.
   • 통풍구에 이물질이 없는지 확인하세요.
   • Clean the collection bag as needed.
2. 롤러 교체:
   • 전원공급장치를 분리하세요.
   • Carefully tilt the machine to access the underside.
   • Locate the roller retention mechanism (e.g., bolts, clips).
   • Remove the current roller and install the desired roller (scarifier or aerator), ensuring it is correctly seated and secured.
   • Always ensure the roller is firmly attached before resuming operation.
3. 저장:
   • 보관하기 전에 기계를 철저히 청소하세요.
   • 기기를 직사광선과 극한 온도 변화를 피해 건조하고 통풍이 잘 되는 곳에 보관하십시오.
   • The handlebar can be folded using the quick-release clamps for compact storage.
   • 어린이의 손이 닿지 않는 곳에 보관하세요.
4. 점검:
   • Regularly inspect the rollers for wear or damage. Replace worn or damaged rollers immediately.
   • 모든 나사와 패스너가 단단히 조여져 있는지 확인하세요.
   • Inspect the power cord for any cuts, abrasions, or signs of damage.

7. 문제 해결

This section addresses common issues you might encounter. For problems not listed here, contact FUXTEC customer support.

8. 기술 사양

9. 보증 및 지원

FUXTEC products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FUXTEC web대지.

For technical assistance, spare parts, or service inquiries, please contact FUXTEC customer support.

• 제조업체: 푹스텍
• 지원하다: Refer to your purchase documentation or the FUXTEC official web연락처 정보 사이트.