1. 서론
Thank you for choosing the X-PRO Hawk 60 Gas Powered Dirt Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new dirt bike. Please read this manual thoroughly before use to ensure proper handling and to maximize your riding experience. The X-PRO Hawk 60 is designed for recreational off-road use, featuring a powerful 58cc 4-stroke engine, CVT transmission, electric start, and disc brakes, making it suitable for young riders learning to ride.
2. 안전 정보
경고: Improper use of this motorcycle can cause serious injury or death. Always wear a helmet and appropriate safety gear, including gloves, long pants, and sturdy footwear. Never operate this vehicle on public roads. Never operate under the influence of drugs or alcohol. Never carry passengers. This dirt bike is not intended for sale in California.
경고: Apply throttle gradually from a standing/starting position. If full throttle is applied from a standing/starting position, the front wheel of the motorcycle can raise up, causing you to be thrown off the motorcycle, resulting in serious injury or death.
경고: This vehicle is intended for riders 16세 미만 years of age. Never operate over speeds too fast for your skill or road conditions.
3. 패키지 내용
Upon opening the package, ensure all components are present and undamaged. The package should contain:
- X-PRO Hawk 60 Dirt Bike (partially assembled)
- Handlebar brackets
- 전륜 및 후륜
- 브레이크 구성품
- 번호판
- 펜더
- 보조 바퀴
- Toolkit (containing necessary wrenches, screwdrivers, etc.)
- 사용자 설명서
4. 설치 및 조립
Some assembly is required before operating your X-PRO Hawk 60 dirt bike. Please follow these steps carefully:
- 언박싱: Carefully open the packing box and remove the motorcycle and all accessories. Ensure you have all necessary tools from the toolkit.
- 전륜 설치: Remove the front brake caliper to prepare for installing the front wheel. Install the front wheel by placing the spacer before tightening the fixed nut. Reinstall the front brake caliper.
- 핸들바 설치: Install the handlebar onto the triple clamp using the provided bolts and clamps. Ensure it is centered and securely tightened.
- 리어 쇼크 설치: Install the rear shock absorber, ensuring all bolts are tightened securely.
- Front Fender and Number Plate: Install the front fender and then attach the number plate to the front of the handlebars.
- 보조 바퀴: Attach the training wheels to the rear axle, ensuring they are securely fastened and provide proper balance. Find the proper fit of the extension. Fix one side then tighten the other side till they all tighten. Double-check extension and tightness. Ensure training wheels are well-fixed.
- 연료 라인: For safety during transport, the airvent hose has been pulled out. Remove the rubber cap and insert the hose back into the airvent.
- Handlebar Pad: Install the handlebar pad for added safety.
- 배터리 연결: Connect the battery terminals. Ensure the positive (+) terminal (red wire) is connected first, followed by the negative (-) terminal (black/green wire).
조립 영상:
비디오 설명: This video provides a detailed guide on assembling the X-PRO Hawk 60 Dirt Bike, covering all necessary steps from unboxing to final checks.
비디오 설명: This video demonstrates the assembly process for a VK 58cc 4-stroke Dirt Bike. While not the exact model, many steps are similar and can be helpful for general assembly guidance.
비디오 설명: This video shows the assembly of an X-PRO Templar X 250cc Dirt Bike. Some assembly steps may be transferable to the Hawk 60 model.
비디오 설명: A general installation video that may provide useful tips for various parts of the dirt bike assembly.
비디오 설명: This video specifically demonstrates how to get the best fit for training wheels on a VK 58cc 4-Stroke Dirt Bike, which is applicable to the Hawk 60 model.
5. 사용 설명서
The X-PRO Hawk 60 features a simple, gearless operation, making it ideal for beginners.
- 연료 혼합물: This is a 2-stroke engine. Always use a 25:1 gas-to-oil mixture. Refer to the fuel container for proper mixing ratios.
- 점화: Insert the key into the ignition switch (located on the side of the bike) and turn it to the 'ON' position.
- 연료 밸브: Locate the fuel valve (petcock) near the carburetor and turn it to the 'ON' position.
- 엔진 시작: Use the pull starter to ignite the engine. A single pull should be sufficient.
- 스로틀 제어: The bike operates without gears. Once started, gently twist the throttle on the right handlebar to accelerate.
- 제동: Use the brake levers on both handlebars to slow down and stop.
- 킬 스위치: The kill switch (red button on the handlebar) will immediately shut off the engine. There is also a safety lanyard that will pull off and kill the engine if the rider falls.
6. 유지관리
오토바이의 수명 연장과 안전한 운행을 위해서는 정기적인 관리가 매우 중요합니다.
- 연료 시스템: Regularly check the fuel lines and carburetor for any leaks or blockages. Ensure the correct fuel mixture is always used.
- 브레이크: Inspect brake pads and cables regularly. Adjust or replace as needed to ensure optimal braking performance.
- 타이어: Check tire pressure before each ride. Ensure tires are free from punctures or excessive wear.
- 체인: 구동 체인을 깨끗하게 유지하고 윤활유를 바르고 장력을 적절하게 조절하십시오.
- 패스너: 주기적으로 모든 너트, 볼트 및 고정 장치가 단단히 조여졌는지 확인하고, 느슨한 부품이 있으면 조여주십시오.
- 에어 필터: Clean or replace the air filter regularly to maintain engine performance.
7. 사양
| 특징 | 사양 |
|---|---|
| 품목 치수(LxWxH) | 50 x 23 x 30.7 인치 |
| 브랜드 이름 | X-프로 |
| 모델명 | DB-K29 |
| 색상 | 주황색 |
| 재료 | 플라스틱 |
| 항목 수 | 1 |
| 제조업체 | X-프로 |
| 스타일 | 운동가 다운 |
| 포함된 구성 요소 | 먼지 자전거 |
| 크기 | 작은 |
8. 보증
This product comes with a 1-month warranty. Please refer to the warranty card included in your package for full details and terms.
9. 지원
For any questions, technical assistance, or parts inquiries, please contact X-PRO customer support. Our dedicated team is committed to providing fast and reliable support to ensure your satisfaction and a smooth riding experience.
