1. 서론
The Kienzle Wireless Weather Station with Projection is a sophisticated device designed to provide comprehensive weather and indoor climate information. It features a clear color display and can project the current time and temperature onto a wall or ceiling. This manual will guide you through its setup, operation, and maintenance, ensuring you get the most out of your device.
2. 패키지 내용
Please check that all items are present and in good condition upon unboxing:
- 기지국
- 1 Thermo-Hygrometer Outdoor Sensor
- 전원 어댑터
- 사용 설명서(본 문서)
Image: The Kienzle weather station base unit and its accompanying outdoor thermo-hygrometer sensor.
3. 제품 특징
The Kienzle Wireless Weather Station offers a range of advanced features for monitoring your environment:
- 투영 함수: Projects time and indoor/outdoor temperature onto a wall or ceiling.
- 컬러 디스플레이: Clear, vibrant display showing all relevant data at a glance.
- Indoor Climate Monitoring: Measures indoor temperature, humidity, and atmospheric pressure.
- 야외 데이터: Displays outdoor temperature and humidity from the included wireless sensor.
- 일기 예보: Provides weather predictions based on atmospheric pressure changes.
- 편안함 표시기: A smiley icon provides a quick visual assessment of indoor climate comfort.
- Mold Risk Index: A 3-level indicator helps identify and prevent potential mold formation.
- 얼음 경고: A snowflake icon flashes when the outdoor temperature is between -1.0 °C and 2.9 °C, indicating potential icy conditions.
- Max/Min Value Recording: Automatically records and allows viewing of maximum and minimum temperature and humidity readings.
- Automatic Time Setting (DCF): Automatically sets date and time via the DCF radio signal for precise timekeeping.
- 듀얼 알람 시계: Features two independent, adjustable alarm times with a convenient snooze function.
- 백라이트: Provides illumination for the display, improving visibility in low-light conditions.
- 무선 센서 범위: The outdoor sensor communicates wirelessly with the base station up to 80 meters in open areas.
4. 설정 가이드
4.1. 기지국 전원 공급
Connect the provided power adapter to the DC 4.5V port on the back of the base station and plug it into a standard power outlet. The display will light up. For backup power during outages, insert 4 x AAA batteries (not included) into the battery compartment on the underside of the base station, ensuring correct polarity.
4.2. 실외 센서 설치
The outdoor sensor requires 2 x AAA batteries (not included). Open the battery compartment on the back of the sensor and insert the batteries, observing the correct polarity. Close the compartment securely. Place the outdoor sensor in a sheltered location outdoors, away from direct sunlight and rain, to ensure accurate readings and prolong its lifespan. Ensure it is within 80 meters of the base station and free from major obstructions.
이미지: 앞면과 뒷면 views of the Kienzle outdoor thermo-hygrometer sensor, showing its display and battery compartment.
4.3. 초기 동기화
Once both the base station and the outdoor sensor are powered, the base station will automatically attempt to connect with the outdoor sensor and receive the DCF time signal. This process may take a few minutes. Ensure both units are close to each other during initial setup. If synchronization fails, refer to the Troubleshooting section for assistance.
5. 사용 설명서
5.1. 디스플레이 오버view
컬러 디스플레이는 포괄적인 개요를 제공합니다.view of various environmental data:
- 실내 온도 및 습도
- 실외 온도 및 습도
- 기압
- Weather Forecast Icons (e.g., Sunny, Partly Cloudy, Rainy)
- 현재 시간 및 날짜
- 곰팡이 위험 지표
- Comfort Level Indicator (Smiley)
- Ice Warning Icon (Snowflake)
- 알람 상태 표시기
Image: The main display of the Kienzle weather station, showing various readings including time, indoor/outdoor temperature and humidity, and weather forecast icons.
5.2. 시간 및 날짜 설정 (수동 조정)
While the DCF signal typically sets the time automatically, you can manually adjust it if needed. Refer to the buttons on the top of the device (e.g., 'SET', 'MODE') to enter time setting mode. Use the '+' and '-' buttons to adjust values and 'SET' or 'MODE' to confirm and move to the next setting.
5.3. 알람 설정
The device supports two independent alarms. Locate the 'ALARM1' and 'ALARM2' switches on the back of the unit. Set the desired alarm times by pressing the corresponding 'ALARM' button and using the '+' and '-' buttons to adjust the hour and minute. Press the 'ALARM' button again to confirm. When an alarm sounds, press the 'SNOOZE' button to temporarily silence it for a few minutes, or any other button to turn it off completely.
Image: The rear panel of the Kienzle weather station, highlighting the alarm switches and power input port.
5.4. 프로젝션 기능 사용
The integrated projector can display the current time and indoor/outdoor temperature onto a wall or ceiling. To activate the projection, ensure the 'Projection' switch on the back of the unit is set to 'ON'. Adjust the projection angle by rotating the projector arm. Use the focus ring on the projector lens to achieve a clear image on your desired surface.
Image: The Kienzle weather station actively projecting the time and temperature onto a wall, demonstrating its projection capability in a home setting.
5.5. View최대값/최소값
Press the 'MAX/MIN' button on the top of the unit to cycle through the maximum and minimum recorded values for indoor temperature, outdoor temperature, indoor humidity, and outdoor humidity. Pressing the button repeatedly will show each value in sequence.
6. 유지관리
- 청소: Wipe the device and sensor with a soft, dry cloth. Do not use abrasive cleaners, solvents, or corrosive chemicals, as these can damage the surfaces and internal components.
- 배터리 교체: Replace batteries in both the base station and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time with new ones of the same type.
- 놓기: Ensure the outdoor sensor remains in a sheltered location to protect it from extreme weather conditions and prolong its lifespan, while also maintaining accurate readings.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No display / Device not powering on | 전원 어댑터가 연결되지 않았습니다. 배터리가 소모되었거나 잘못 삽입되었습니다. | Check power adapter connection; Replace batteries, ensuring correct polarity. |
| Outdoor temperature not displayed / Incorrect readings | Sensor out of range; Sensor batteries depleted; Interference. | Move sensor closer to base station; Replace sensor batteries; Relocate units away from electronic interference. |
| Time not setting automatically (DCF) | Weak DCF signal; Interference. | Move base station to a location with better signal reception (e.g., near a window); Avoid placing near electronic devices; Manually set time if necessary. |
| Projection unclear or out of focus | Incorrect focus adjustment; Incorrect projection distance. | Adjust the focus ring on the projector; Adjust the distance of the base station from the projection surface. |
| 알람이 울리지 않음 | 경보가 작동하지 않았습니다. 볼륨이 너무 작습니다. | Ensure alarm is set to "ON"; Check alarm settings. |
8. 사양
- 모델 번호: 14993
- Dimensions (Base Station): 16.5 x 16.5 x 2.9cm
- 무게(기준 스테이션): 206그램
- 전원 공급 장치(기지국): Power adapter (included), 4 x AAA batteries (not included) for backup
- 전원(실외 센서): AAA 배터리 2개 (포함되지 않음)
- 무선 주파수: 433MHz, 868MHz
- 무선 범위: (개방된 공간에서) 최대 80미터
- 온도 정확도: ±1 °C
- 재료: 플라스틱
- 색상: Black (Base Station), White (Sensor)
- 특별 기능: Mold alarm, Ice warning, Alarm function, Room temperature indicator, Max/Min value memory, Projection, Backlight, DCF time signal.
9. 보증 및 지원
For warranty information and technical support, please refer to the contact details provided with your purchase documentation or visit the official Kienzle web이 설명서에는 예비 부품의 가용성에 대한 정보가 제공되지 않습니다.
