1. 서론
The Kidde Carbon Monoxide Detector (Model KN-COB-DP2) is designed to detect carbon monoxide (CO) gas in your home and alert you with an 85-decibel alarm. This device utilizes electrochemical sensor technology for reliable detection. It operates by plugging into a standard 120V AC power outlet and includes two AA alkaline batteries for backup power during outages. Key features include a test-hush button, peak level memory, and an end-of-life alarm.
Image 1: Kidde Carbon Monoxide Alarm highlighting LED operation, test/reset button, event memory, low battery backup, end of unit life alarm, and 10-year limited warranty.
2. 중요한 안전 정보
WARNING: Carbon monoxide is an invisible, odorless, and tasteless gas that can be fatal. This alarm is designed to detect carbon monoxide from any source of combustion. It is not designed to detect smoke or fire.
- Never ignore a CO alarm. Act immediately.
- If the alarm sounds, move to fresh air immediately. Call 911 or your local emergency services.
- 장치를 페인트하지 마십시오.
3. 제품 특징
- 전기화학 센서: Advanced technology for accurate CO detection.
- 플러그인 작동: Easily connects to any standard 120V AC wall outlet.
- AA Battery Backup: 정전 시 지속적인 보호 기능을 제공합니다.tages (2 AA alkaline batteries included).
- 85데시벨 경보: Loud audible alert when carbon monoxide is detected.
- 테스트-소음 제거 버튼: Allows for easy testing of the alarm's functionality and temporary silencing of nuisance alarms.
- 최고 수준의 메모리: Records the highest CO concentration detected since the last reset or power cycle.
- End of Unit Life Alarm: Alerts you when the unit needs to be replaced, typically after 10 years of operation.
- Tamper Resist Feature: Helps prevent unauthorized removal of the unit.
Image 2: Visual representation of the detector's key features, including CO detection, event memory, tamper resistance, battery backup, UL certification, and the test/reset button.
4. 설치
- 단위 풀기: Carefully remove the carbon monoxide detector from its packaging.
- Activate Battery Backup: The unit comes with two AA alkaline batteries pre-installed. A yellow pull tab may need to be removed to activate the battery backup. Ensure the battery compartment is securely closed.
- 콘센트에 꽂으세요: Insert the detector into a standard, unswitched 120V AC wall outlet. The unit is designed to allow access to the second outlet if it's a dual outlet.
- 작동 확인: Once plugged in, the green LED indicator should illuminate, signifying proper operation.
Image 3: The rear of the detector, illustrating the AC plug and the battery compartment for backup power.
Image 4: Diagram detailing the AC plug-in, tamper resist switch, and the inclusion of 2 AA batteries for backup.
5. 사용 설명서
LED 표시등:
- 녹색 LED : Flashes every 60 seconds, indicating normal operation.
- 적색 LED : Flashes with an audible alarm, indicating CO detection.
테스트/무음 버튼:
를 누르고 계세요 테스트/리셋 button to test the alarm's electronic circuitry and horn. The alarm will sound if functioning correctly. To silence a nuisance alarm (e.g., from cooking fumes), press the 테스트/리셋 button. This will temporarily silence the alarm for approximately 8 minutes.
최고 수준의 메모리:
The detector records the highest CO concentration detected. To view the peak level, press the 테스트/리셋 button. The display (if applicable to your model) will show the recorded level. This feature also records the last time the unit was tested.
Image 5: The front of the detector, displaying the operational indicators and the test/reset button.
6. 유지관리
주간 테스트:
Test the alarm weekly by pressing and holding the 테스트/리셋 button until the alarm sounds. This confirms the unit is functioning properly.
배터리 교체:
The unit will chirp once every 60 seconds with a red LED flash when the batteries are low. Replace the two AA alkaline batteries immediately. Refer to Image 3 for battery compartment location.
청소:
Clean the detector regularly by vacuuming the outside of the unit with a soft brush attachment. Do not use cleaning solvents or spray directly into the unit.
장치 수명 종료:
The unit has a 10-year operational life. After 10 years, the unit will chirp every 30 seconds to indicate it needs to be replaced. This chirp cannot be silenced and will continue until the unit is replaced.
7. 배치 지침
For optimal protection, install carbon monoxide detectors on every level of your home, including the basement. Place a detector near sleeping areas and in rooms where fuel-burning appliances are located. Avoid placing detectors:
- Within 6 feet of cooking appliances.
- Within 20 feet of furnaces.
- In garages, kitchens, or furnace rooms (unless specifically recommended by local codes).
- In direct sunlight or near heating/cooling vents.
Image 6: A Kidde Carbon Monoxide Alarm installed in a typical home environment, demonstrating its discreet design.
8. 문제 해결
| 상태 | Indicator/Sound | 행동 |
|---|---|---|
| CO 경보 | 4 quick beeps, 5 seconds off, repeats. Red LED flashes. | Move to fresh air. Call 911. |
| 단위 오류 | Intermittent audible chirp every 25-30 seconds. | 장치를 교체하십시오. |
| 배터리 부족 | 1 quick beep with red LED flash every 60 seconds. | 배터리를 즉시 교체하십시오. |
| 장치 수명 종료 | 1초마다 30번 울음. | 장치를 교체하십시오. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | KN-COB-DP2 |
| 전원 | 120V AC Plug-in with 2 AA Alkaline Battery Backup |
| 경보 음 레벨 | 85데시벨 |
| 센서 기술 | 전기 화학 |
| 제품 치수 | 2.32인치 깊이 x 2.83인치 너비 x 4.72인치 높이 |
| 품목 무게 | 10.9온스(0.31킬로그램) |
| 작동 습도 | 10 ~ 95% 상대 습도(RH), 비응축 |
| 인증 | UL Certified (Meets UL 2034, NFPA72, NFPA101, FHA, HUD requirements) |
| 색상 | 하얀색 |
이미지 7: 측면 view of the detector with approximate dimensions, highlighting its compact design.
10. 보증 및 지원
This Kidde Carbon Monoxide Detector comes with a 10년 제한적 제조사 보증. For warranty claims, technical support, or further information, please refer to the contact details provided in the product packaging or visit the official Kidde web대지.
