1. 제품 오버view
The SmallRig Portable Carbon Fiber Travel Tripod Kit (Model 11758) is designed for photographers and videographers requiring a lightweight, stable, and versatile support system. It features carbon fiber legs, a fluid video head, and the ability to convert into a monopod or be used for low-angle shooting.
Image 1.1: The SmallRig Portable Carbon Fiber Travel Tripod Kit, showcasing its compact design and fluid head.
2. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 삼각대 x 1
- Video Head x 1
- Short Center Column x 1
- 보관 가방 x 1
Image 2.1: Visual representation of the tripod and its included accessories, along with basic specifications.
3. 설치 및 조립
3.1 삼각대 펼치기
- 삼각대를 평평하고 안정적인 표면에 놓으십시오.
- Release the leg angle locks on each leg to extend them.
- 원하는 안정성을 얻으려면 다리 각도를 조정하십시오.
- Extend the leg sections by releasing the height lever locks and pulling out each section. Securely fasten the locks once the desired height is reached.
3.2 카메라 부착
- Ensure the quick release plate lock on the fluid head is disengaged.
- Remove the quick release plate from the fluid head.
- Attach the quick release plate to the bottom of your camera or camera cage using the 1/4"-20 screw. Ensure it is tightened securely.
- Slide the camera with the attached quick release plate back into the fluid head.
- Engage the quick release plate lock to secure the camera.
이미지 3.1: 상세 view of the fluid video head, highlighting the quick release plate lock, tilt lock, pan lock, and bowl lock.
4. 사용 설명서
4.1 높이 조정
The tripod offers a flexible height range from 25cm (0.82in) to 158cm (61.8in). To adjust the height:
- 다리 섹션 : Use the height lever locks on each of the 5-section legs to extend or retract them.
- 중앙 컬럼: The main center column can be extended for additional height.
Image 4.1: Illustration demonstrating the tripod's adjustable height range, from its lowest to highest extension.
4.2 Pan and Tilt Video Head
The fluid head provides smooth pan and tilt movements for video recording.
- 팬 잠금: Rotate the pan lock knob to secure or release the 360° panning movement.
- 틸트 잠금 : Rotate the tilt lock knob to secure or release the +90°/-70° tilting movement.
- Use the handle for precise control during panning and tilting.
Image 4.2: Visual guide to the fluid video head's pan and tilt capabilities, showing the range of motion.
4.3 모노포드 변환
One of the tripod legs can be detached and combined with the center column and fluid head to form a monopod.
- Identify the leg with a rubber grip that can be unscrewed.
- Unscrew and detach this leg from the tripod chassis.
- Remove the fluid head from the tripod.
- Attach the detached leg to the bottom of the fluid head.
- Attach the center column to the top of the fluid head.
4.4 Low-Angle Shooting
For very low-angle shots, the detachable short center column can be utilized.
- Detach the weight hook from the main center column.
- Rotate the video head downward at a 90° angle from the center column.
- Insert the Allen wrench attached to the hook into the center column and unscrew the internal screw.
- Replace the standard center column with the short center column.
Image 4.3: Step-by-step guide on how to configure the tripod for low-angle shooting using the short center column.
5. 유지관리
적절한 관리는 삼각대의 수명과 최적의 성능을 보장합니다.
- 청소: 사용 후에는 탄소 섬유 다리와 금속 부품을 부드럽고 마른 천으로 닦아주세요. 잘 지워지지 않는 얼룩은 약간 거친 천을 사용하세요.amp 천으로 닦아 완전히 말리십시오. 강한 화학 약품 사용은 피하십시오.
- 매끄럽게 하기: The fluid head is designed for smooth operation. Do not attempt to lubricate internal mechanisms unless specifically instructed by SmallRig support.
- 저장: Store the tripod in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- 점검: Periodically check all screws, locks, and joints for tightness. Tighten any loose components carefully.
6. 문제 해결
If you encounter issues with your SmallRig tripod, refer to the following common solutions:
- Stiff Pan/Tilt Movement: Ensure that the pan lock and tilt lock knobs on the fluid head are fully disengaged. If movement remains stiff, check for any obstructions or debris. Do not force movement.
- 불안정한 설정: Verify that all leg sections are fully extended and their height lever locks are securely fastened. Ensure leg angles are set appropriately for the terrain and load. The center column should also be locked.
- 카메라 보안 문제 발생: Confirm that the quick release plate is correctly attached to your camera and fully seated in the fluid head. Ensure the quick release plate lock is engaged.
- Monopod Conversion Difficulty: Ensure you are detaching the correct leg and that all connections are properly aligned and tightened when assembling the monopod.
For issues not resolved by these steps, please contact SmallRig customer support.
7. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 11758 |
| 재료 | 탄소섬유 |
| 최대 높이 | 1.57미터(61.8인치) |
| 최소 높이 | 25센티미터(0.82인치) |
| 접힌 높이 | 48센티미터(18.9인치) |
| 품목 무게 | 1.38kg(3.02파운드) |
| Weight Limit (Load Capacity) | 3킬로그램(6.6파운드) |
| 다리 직경 | 26.5 밀리미터 |
| 다리 섹션 | 5 |
| 삼각대 헤드 유형 | Pan Head (Fluid) |
| 팬 이동 | 360° |
| 틸트 운동 | +90° / -70° |
| 퀵 릴리스 플레이트 | Arca-compatible with 1/4"-20 screw |
| 제품 치수 | 19.09 x 3.31 x 3.31인치(접힌 상태) |
| 호환 장치 | Camera, DSLR |
Image 7.1: The tripod's robust carbon fiber construction, emphasizing its lightweight design and 3kg (6.6lb) load capacity.
8. 보증 및 지원
8.1 반품 정책
This product is eligible for a 30-day refund/replacement return policy from the date of purchase. Please refer to the retailer's specific return guidelines for detailed information.
8.2 보호 계획
Extended protection plans may be available for purchase separately to cover your product beyond the standard return period. Options may include 2-Year or 3-Year protection plans, or a monthly 'Complete Protect' plan.
8.3 고객 지원
For technical assistance, warranty claims, or further inquiries, please contact SmallRig customer support through their official web제품을 구매한 사이트 또는 소매업체.
