소개
Thank you for choosing the GIOTOHUN Cat Water Fountain. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new pet water dispenser. Please read this manual thoroughly before use to ensure optimal performance and the longevity of the product.
제품 끝view
The GIOTOHUN Cat Water Fountain is designed to provide fresh, circulating water for your pets, encouraging increased hydration. It features a 2-liter capacity, a triple filtration system, quiet operation, and an integrated LED light.
주요 특징:
- 용량 2리터(67온스): Provides sufficient water for 4-6 days for an average adult cat, reducing refill frequency.
- 트리플 여과 시스템 : Utilizes activated carbon, high-density cotton, and a sponge filter to remove impurities, odors, and soften water.
- 매우 조용한 펌프: Operates at approximately ≤35dB, ensuring a peaceful environment for both pets and owners.
- Dual Water Flow Modes: Offers both tap mode and fountain mode to cater to different pet preferences and encourage drinking.
- 내장 LED 조명: Allows for easy monitoring of water levels and helps pets locate the fountain in low-light conditions.
- 분리 가능한 디자인: Facilitates easy assembly, disassembly, and cleaning of all components.
Image: The GIOTOHUN Cat Water Fountain with included filters and sponges.
Image: A cat drinking from the faucet mode, demonstrating the running water feature.
Image: Diagram illustrating the triple filtration system with filter cotton, activated carbon, and sponge filters.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x GIOTOHUN Cat Water Fountain Unit
- 활성탄 필터 6개
- 3 x Sponge Filters
- 1 x Water Pump (pre-installed or separate)
- 1 x 사용 설명서
설치 지침
Follow these steps to assemble and prepare your GIOTOHUN Cat Water Fountain for first use:
- 분해: Carefully remove all components from the packaging. Separate the top tray, water tank, pump, and filters.
- 필터 준비: Immerse the activated carbon filters in water for 3-5 minutes before first use to remove any loose carbon dust. Rinse the sponge filters under running water.
- 펌프 설치: Place the water pump securely at the bottom of the water tank. Ensure the power cord is routed through the designated channel to prevent pinching.
- Place Filters: Insert the sponge filter into its designated slot, typically around the pump. Place the activated carbon filter into the filter tray.
- 상단 트레이 조립: Place the top tray onto the water tank, ensuring it is seated correctly. If applicable, attach the faucet spout to the pump outlet.
- 물 탱크 채우기: Fill the water tank with clean water up to the 'MAX' line indicated on the tank. Do not overfill.
- 전원 연결: Plug the power adapter into a wall outlet. The fountain will begin operating, and the LED light will illuminate.
이미지: 폭발 view showing the detachable components of the fountain for easy assembly and cleaning.
작동 지침
Once assembled and filled, the fountain operates continuously when plugged in.
- 수위 모니터링: The transparent water tank and built-in LED light allow you to easily monitor the water level. Refill water when it approaches the 'MIN' line to prevent the pump from running dry.
- 물 흐름 모드: The fountain typically provides a continuous flow. Some models may allow adjustment between faucet and bubbling fountain modes by adjusting the spout or pump settings. Refer to specific product diagrams if applicable.
- LED 표시등: The LED light indicates that the fountain is powered on and operating.
Image: The water fountain displaying its 2-liter capacity with clear MAX and MIN water level indicators.
유지
정기적인 청소와 필터 교체는 수질을 유지하고 분수대의 수명을 연장하는 데 매우 중요합니다.
필터 교체:
- Replace the activated carbon filter every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow.
- Rinse the sponge filter weekly and replace it every 2-4 weeks, or when it appears heavily soiled.
펌프 세척:
To extend the life of the pump and ensure efficient operation, clean the pump every 2-4 weeks.
- Unplug the fountain from the power outlet.
- Disassemble the fountain and remove the pump from the water tank.
- Remove the pump cover and the impeller cap.
- 임펠러를 제거합니다.
- Clean all components (pump housing, impeller, impeller cap, and cover) with a small brush and clean water to remove any hair, debris, or mineral buildup.
- Reassemble the pump and place it back into the fountain.
Image: Illustration of the multi-layer filtration system, including carbon, cotton, and sponge components.
Image: Step-by-step guide for cleaning the water pump, including removing the cover, impeller cap, and impeller.
문제 해결
분수에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 분수에서 물이 나오지 않음 / 펌프가 작동하지 않음 | Low water level; Pump clogged with hair/debris; Power disconnected. | Ensure water level is above 'MIN'. Clean the pump thoroughly (refer to Maintenance section). Check power connection. |
| 분수에서 나는 과도한 소음 | Low water level; Pump not properly seated; Debris in pump. | Refill water to 'MAX' level. Ensure pump is securely placed. Clean the pump. |
| 물이 더러워 보이거나 냄새가 납니다 | 필터를 교체해야 하고, 분수대를 청소해야 합니다. | Replace activated carbon filter. Clean the entire fountain and pump (refer to Maintenance section). |
| LED 조명이 작동하지 않음 | Power issue; LED malfunction. | Check power connection. If pump works but LED does not, contact customer support. |
명세서
| 사양 | 세부 사항 |
|---|---|
| 모델명 | H1-BPRO |
| 상표 | 지오토훈 |
| 용량 | 2리터(67온스) |
| 품목 치수(LxWxH) | 7.28 x 7.28 x 4.53 인치 |
| 품목 무게 | 1.23파운드(0.56킬로그램) |
| 재료 | Plastic (Black-2L + 6 filters + 3 sponges variant) |
| 전력 소비 | 1.5 W (Ultra-quiet pump) |
보증 및 지원
The GIOTOHUN Cat Water Fountain (Model H1-BPRO) comes with a 2년 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생한 제조상의 결함 및 고장에 적용됩니다.
For warranty claims, technical support, or inquiries regarding replacement parts, please contact the seller or GIOTOHUN customer service through the platform where the product was purchased. Please retain your proof of purchase for warranty validation.
