AUTOPHIX 7610P+ Diagnostic Tool User Manual

소개

The AUTOPHIX 7610P+ is a professional diagnostic scan tool specifically designed for Volkswagen, Audi, Skoda, and Seat vehicles. It provides comprehensive system diagnostics and various maintenance reset services, enabling users to identify and resolve vehicle issues efficiently. This manual will guide you through the proper setup, operation, and maintenance of your device.

설정 및 초기 사용

Follow these steps to prepare your AUTOPHIX 7610P+ for its first use:

1. 짐 풀기: Carefully remove the AUTOPHIX 7610P+ Code Reader and the USB Cable from the packaging.
2. 차량 연결:
   • 차량 엔진이 작동 중인지 확인하십시오.
   • 차량에서 OBD2 포트를 찾으세요. 일반적으로 운전석 쪽 대시보드 아래에 있습니다.
   • Plug the diagnostic tool's OBD2 connector firmly into the vehicle's OBD2 port. The device will power on automatically.
3. Initial Device Boot-up: The device will display the main menu after powering on.

작동 지침

The AUTOPHIX 7610P+ offers various functions accessible through its main menu. Use the navigation buttons (Up, Down, Left, Right, OK, ESC, I/M, READ DTC) to select and confirm options.

1. 전체 시스템 진단

This function allows for a comprehensive scan of all electronic control units (ECUs) in your vehicle, including Engine, Transmission, ABS, Airbag, and more. It helps identify fault codes across various systems.

1. From the main menu, select "For VW" (or similar option for VAG vehicles).
2. Choose "Full System Scan" or "Diagnosis".
3. The tool will automatically scan all available systems and display any detected fault codes.
4. Review the displayed codes and their descriptions.
5. To clear fault codes after repairs, select the "Erase Fault Codes" option. Note: Fault codes can only be cleared after the underlying issue has been repaired. This scanner does not repair vehicle issues.

2. Maintenance Reset Services

The 7610P+ supports various essential maintenance reset functions. Availability of specific functions may vary by vehicle model and year. Please confirm compatibility for your specific vehicle before performing any service.

• 오일 리셋: Resets the oil life monitor after an oil change.
• 배터리 등록(BMS 재설정): Registers a new battery with the vehicle's ECU to ensure proper charging and system function.
• Electronic Throttle Control (ETC) Reset: Recalibrates the throttle body.
• 전자식 주차 브레이크(EPB) 재설정: Resets the EPB system after brake pad replacement or maintenance.
• 디젤 미립자 필터(DPF) 재생: Initiates DPF regeneration to clear accumulated soot.
• 조향각 학습: 조향 각도 센서를 보정합니다.
• 인젝터 코딩: Writes specific parameters of new injectors into the ECU.
• Fuel Pump Activation: Activates the fuel pump for diagnostic checks.
• TPMS 재설정: Re-initializes and calibrates the Tire Pressure Monitoring System.

To perform a reset service:

1. From the main menu, select the desired reset function (e.g., "Oil Reset").
2. Follow the on-screen prompts to complete the procedure.

3. Advanced OBD2 Modes

The tool provides standard OBD2 functions for engine diagnostics, compatible with most 1996 and newer 12V cars and light trucks (non-electric) that are OBD II-compliant with 16-Pin OBD II protocols.

• 코드 읽기: Retrieves generic (P0, P2, P3, U0) and manufacturer specific (P1, P3, U1) codes.
• 코드 지우기: 진단 오류 코드(DTC)를 삭제하고 엔진 경고등(MIL)을 끕니다.
• I/M 준비: 배출 모니터링 시스템의 준비 상태를 점검합니다.
• 데이터 스트림 : Displays live data from the vehicle's sensors in text or graph format.
• 차량 정보: 차량 식별 번호(VIN), 교정 ID(CALID), 교정 확인 번호(CVN)를 검색합니다.
• EVAP 시스템 테스트: Initiates a leak test for the vehicle's evaporative emission system.

유지 관리 및 업데이트

The AUTOPHIX 7610P+ offers lifetime free software updates to ensure compatibility with new vehicle models and to add new features or fix bugs.

1. 소프트웨어 다운로드 : Visit the official AUTOPHIX website to download the latest update software for your device.
2. 컴퓨터 연결: Connect the diagnostic tool to a computer using the provided USB cable. This cable is solely for connecting the device to a computer for software updates or printing diagnostic reports.
3. 업데이트 프로세스 : Follow the instructions provided with the update software to install the latest firmware and vehicle databases onto your 7610P+. Ensure the computer meets the minimum system requirements (Windows 7/8/10/11) and that the driver is installed in administrator mode.

문제 해결

• 장치 전원이 켜지지 않음:

  Ensure the OBD2 connector is securely plugged into the vehicle's OBD2 port and the vehicle's ignition is on (or engine running). The device draws power directly from the vehicle's OBD2 port.

• 통신 오류:

  Verify that the vehicle is compatible with the 7610P+ (VW, Audi, Skoda, Seat). Check the OBD2 connection. If the issue persists, try the tool on another compatible vehicle to rule out a vehicle-specific problem. For specific compatibility inquiries, contact AUTOPHIX customer support with your car's brand, model, year, and the specific issue you're experiencing.

• 오류 코드를 지울 수 없습니다:

  Fault codes can only be cleared after the underlying mechanical or electrical issue has been resolved. If the problem persists, the code will reappear. This scanner does not repair vehicle issues.
• 소프트웨어 업데이트 문제:

  Ensure the USB cable is properly connected to both the device and the computer. Confirm that the update software is running in administrator mode on a compatible Windows operating system (7, 8, 10, or 11). Check for internet connectivity during the update process.

• 특정 기능이 작동하지 않음:

  Some advanced functions may not be supported on all vehicle models or years. Refer to the vehicle coverage list or contact AUTOPHIX customer support with your vehicle's brand, model, year, and the specific function you are trying to use for confirmation.

명세서

보증 및 지원

AUTOPHIX is committed to providing high-quality products and customer satisfaction.

• 보증: Please refer to the product packaging or the official AUTOPHIX web자세한 보증 정보는 사이트를 참조하십시오.
• 고객 지원: For technical assistance, compatibility inquiries, or any other questions, please contact AUTOPHIX customer support. Contact details can typically be found on the official AUTOPHIX web웹사이트 또는 제품 설명서에서 확인할 수 있습니다.