1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter. This device is designed for measuring active energy consumption in single-phase AC systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.
이미지 1: 앞면 view of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter, showing the LCD display and terminal connections.
2. 안전 정보
부상 및 기기 손상을 방지하기 위해 다음 안전 수칙을 준수해 주십시오.
- 설치는 자격을 갖춘 사람만 수행해야 합니다.
- 설치 또는 유지보수 전에 반드시 주 전원을 차단하십시오.
- Do not operate the meter in environments with excessive moisture, dust, or corrosive gases.
- Verify correct wiring connections according to the provided diagram to avoid damage or malfunction.
- The meter is designed for indoor use only.
- Do not attempt to open or repair the meter yourself. Contact qualified service personnel.
3. 패키지 내용
패키지를 열 때 모든 품목이 들어 있고 손상되지 않았는지 확인하세요.
- 1 x SINOTIMER DDS6619 Din Rail Single Phase Energy Meter
- 1 x 사용자 매뉴얼(이 문서)
4. 제품 특징
The DDS6619 energy meter offers a range of features for efficient power monitoring:
- Innovative Dual-Row Display: The top row rotates to show temporary kWh, voltage, current, power, power factor, and frequency. The second row displays total power consumption.
- LCD 백라이트: Blue LCD HD backlight ensures clear visibility in various lighting conditions.
- 높은 정확도: Class 1.0 meter, utilizing microelectronics and digital processing for reliable energy measurement.
- 6-in-1 Multimeter Functionality: Displays Total Energy (kWh), Temporary Energy (kWh), Voltage (V), Current (A), Power (W), Frequency (Hz), and Power Factor (PF).
- Energy Memory: All electric energy data is automatically stored and memorized upon power loss.
- 재설정 기능: Temporary kWh data can be reset to zero for specific measurement needs. Total power consumption remains unaffected.
- 공간 효율적인 디자인: Standard 36mm width, compatible with universal DIN 35mm guide rails.
- 내구성 있는 구조: Made from flame-retardant, high-quality ABS material for impact resistance and long service life.
Image 2: Illustration of the DDS6619 display modes, demonstrating how temporary and total readings for various electrical parameters are shown.
5. 설정 및 설치
5.1 치수
The meter is designed for standard DIN rail mounting. Refer to the dimensions below for proper planning:
Image 3: Dimensional drawing of the DDS6619 meter, indicating its width (36.3mm), height (78.5mm), and depth (65.8mm) for installation planning.
5.2 장착
- Ensure the main power supply is turned off at the circuit breaker before proceeding.
- Mount the DDS6619 meter onto a standard 35mm DIN rail in your electrical panel.
- Ensure the meter is securely fastened to prevent movement.
5.3 배선도
Follow the wiring diagram carefully. Incorrect wiring can cause damage to the meter or electrical system.
Image 4: Wiring diagram for the DDS6619 meter, illustrating the correct connections for live (L) and neutral (N) input and output terminals.
- Connect the incoming Live (L) wire to the terminal marked 'L' on the input side.
- Connect the incoming Neutral (N) wire to the terminal marked 'N' on the input side.
- Connect the outgoing Live (L) wire to the terminal marked 'L' on the output side.
- Connect the outgoing Neutral (N) wire to the terminal marked 'N' on the output side.
- 전원을 다시 연결하기 전에 모든 연결부가 단단히 고정되었는지, 그리고 올바르게 연결되었는지 다시 한번 확인하십시오.
6. 사용 설명서
6.1 전원 켜기
After successful installation and wiring, restore power to the circuit. The meter's LCD display will illuminate, showing the current readings.
6.2 디스플레이 모드
The meter features a dual-row display. The top row cycles through various temporary electrical parameters, while the bottom row consistently shows the total power consumption (kWh).
- Top Row (Rotating Display): Shows temporary kWh, Voltage (V), Current (A), Power (W), Power Factor (PF), and Frequency (Hz). This display automatically cycles through these parameters.
- Bottom Row (Static Display): Always shows the total accumulated power consumption in kWh. This value cannot be reset.
6.3 Reset Function for Temporary kWh
The temporary kWh reading can be reset to zero for monitoring consumption over specific periods.
Image 5: Diagram illustrating the reset function. The top display shows temporary power consumption (resettable), the bottom shows total power consumption (not resettable), and indicates to hold the reset button for 6 seconds.
- Locate the reset button on the front panel of the meter.
- Press and hold the reset button for approximately 6 seconds.
- The temporary kWh value on the top display will reset to zero. The total power consumption on the bottom display will remain unchanged.
7. 사양
| 매개변수 | 값 |
|---|---|
| 모델 | DDS6619 |
| 정격 볼륨tage | 120VAC |
| 정격 전류 | 5(80)가 |
| 빈도 | 60Hz |
| 정확도 등급 | 1.0 |
| 표시하다 | 블루 백라이트 LCD |
| 설치 | 35mm DIN 레일 |
| 재료 | 난연 ABS |
| 패키지 크기 | 2.72 x 1.65 x 0.63 인치 |
| 무게 | 0.48 온스 |
8. 유지관리
The DDS6619 energy meter requires minimal maintenance. Follow these guidelines to ensure its longevity:
- 부드럽고 마른 천으로 닦아 측정기를 깨끗하게 유지하세요. 연마성 세제나 용제는 사용하지 마세요.
- 작동 환경이 지정된 온도 및 습도 범위 내에 유지되도록 하세요.
- Periodically check wiring connections for tightness, especially in environments subject to vibration.
- Do not expose the meter to direct sunlight for extended periods, as this may affect the LCD display.
9. 문제 해결
If you encounter issues with your DDS6619 meter, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이 없음/계기판 전원 켜지지 않음 | No power supply; Incorrect wiring; Faulty meter | Check power supply to the circuit. Verify wiring connections according to the diagram. If problem persists, contact support. |
| 부정확한 판독 | Incorrect wiring; Overload; External interference | Re-check wiring. Ensure load does not exceed meter's maximum current rating. Isolate from strong electromagnetic fields. |
| Temporary kWh not resetting | Reset button not held long enough | Press and hold the reset button for a full 6 seconds. |
| Total kWh reading is zero or incorrect | Incorrect wiring; Meter malfunction | Verify wiring. Note that total kWh cannot be reset. If consistently incorrect, contact support. |
10. 보증 및 지원
SINOTIMER 제품은 높은 품질 기준에 따라 제조됩니다. 보증 정보 또는 기술 지원에 대해서는 구매 시 제공된 설명서를 참조하거나 SINOTIMER 공식 웹사이트를 방문하십시오. web대지.
자세한 정보와 연락처는 다음에서 확인할 수 있습니다. 아마존에서 SINOTIMER 스토어를 방문하세요.
