1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the YUHANUS Smart Door Access Control System. This system is designed to provide secure and convenient access management for various door types, integrating a 600lbs magnetic lock, power supply, remote controls, and Tuya App compatibility.
2. 안전 정보
- 설치 또는 유지보수 작업을 수행하기 전에 항상 전원을 차단하십시오.
- Ensure all wiring connections are secure and correctly polarized to prevent damage to the system or electrical hazards.
- Installation should be performed by qualified personnel or with careful adherence to these instructions.
- Do not expose the components to water or excessive moisture.
- Verify local electrical codes and regulations are met during installation.
3. 패키지 내용
아래 목록과 패키지 내용물을 비교해 보세요. 누락되었거나 손상된 품목이 있는 경우 고객 지원팀에 문의하세요.
- 600lbs Magnetic Lock
- 전기자 플레이트
- ZL 브래킷
- Power Supply Controller (Model: SP1203)
- Remote Controllers (x2)
- Stainless Steel Exit Button
- 전원 코드
- 장착 하드웨어(나사, 앵커)
Image 3.1: All components included in the YUHANUS Smart Door Access Control System kit.
4. 제품 오버view
4.1 Magnetic Lock
The 600lbs magnetic lock provides strong holding force to secure the door. It features a built-in alarm beeper that activates if the door is not securely closed.
Image 4.1: The 600lbs magnetic lock and its corresponding armature plate.
Image 4.2: Dimensions of the magnetic lock and armature plate.
4.2 ZL Bracket
The ZL bracket is designed for inswinging doors, allowing proper alignment and secure mounting of the magnetic lock and armature plate.
Image 4.3: The ZL bracket components.
Image 4.4: Magnetic lock assembly with the ZL bracket.
4.3 Power Supply Controller
The power supply controller (Model SP1203) converts AC 100-240V to DC 12V/3A, providing power to the magnetic lock and other components. It includes terminals for various connections and a timer adjustment for lock release duration (0-15 seconds).
Image 4.5: Power Supply Controller (Model SP1203).
4.4 원격 컨트롤러
Two remote controllers are included for wireless door unlocking. The system supports up to 30 remote controllers.
4.5 Stainless Steel Exit Button
The exit button provides a simple and reliable method for exiting the secured area from the inside.
5. 설정 및 설치
Carefully follow these steps for proper installation. Professional installation is recommended.
5.1 Mounting the Magnetic Lock and ZL Bracket
- Determine the optimal position for the magnetic lock on the door frame and the armature plate on the door, ensuring proper alignment for an inswinging door using the ZL bracket.
- Mount the Z-shaped part of the bracket to the door frame.
- Mount the L-shaped part of the bracket to the Z-shaped part, ensuring the magnetic lock can be securely attached.
- Attach the magnetic lock to the L-shaped bracket.
- Mount the armature plate to the door, aligning it with the magnetic lock. Ensure there is a slight gap (approx. 1-2mm) between the lock and the plate when the door is closed to allow for proper magnetic engagement.
5.2 배선도 및 연결
Refer to the wiring diagram below for all electrical connections. Ensure power is OFF before making any connections.
Image 5.1: Wiring Diagram of the Access Control System.
- 전원 공급 장치 연결: Connect the AC power cord to the N and L terminals on the power supply controller.
- 자석 잠금 장치 연결: Connect the magnetic lock to the V+ and V- terminals on the power supply controller.
- 종료 버튼 연결: Connect the exit button to the PUSH and GND terminals on the power supply controller.
- 선택적 연결: The power supply controller also provides terminals for NC (Normally Closed), COM (Common), and NO (Normally Open) for integration with other access control devices or auto-door controllers.
5.3 Powering On and Initial Test
- Once all connections are made, plug in the power supply.
- The magnetic lock should engage, securing the door.
- Press the exit button to ensure the lock disengages.
- Test the remote controllers to ensure they can unlock the door.
이미지 5.2: 이상view of the installed access control system.
6. 사용 설명서
6.1 Using Remote Controllers
Press the button on the remote controller to momentarily disengage the magnetic lock, allowing the door to be opened. The lock will re-engage after the set delay time.
6.2 종료 버튼 사용하기
From the inside, press the stainless steel exit button to disengage the magnetic lock and open the door. The lock will re-engage after the set delay time.
6.3 Tuya App Remote Control
The system is compatible with the Tuya App for remote unlocking and management. Follow the Tuya App's instructions to add and configure the access control system. This allows you to unlock the door from anywhere using your smartphone.
6.4 Adjusting Lock Delay Time
The power supply controller has a timer adjustment knob (0S-15S) to set the duration the magnetic lock remains disengaged after an unlock command. Use a small screwdriver to adjust this knob to your desired delay.
7. 유지관리
- Regularly inspect all wiring for signs of wear or damage.
- Keep the magnetic lock and armature plate clean and free of debris to ensure optimal magnetic contact.
- Test the system periodically (e.g., monthly) to ensure all components are functioning correctly.
- Ensure the power supply unit is in a well-ventilated area and not exposed to extreme temperatures.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Magnetic lock does not engage. | 시스템에 전원이 공급되지 않습니다. 배선 연결이 느슨합니다. Faulty magnetic lock. | 전원 공급 장치 및 연결을 확인하십시오. Verify all wires are securely connected. Contact customer support if lock is faulty. |
| Door does not unlock with remote/button. | 리모컨 배터리 부족/완전 방전. 리모컨이 페어링되지 않았습니다. Exit button wiring issue. 전원 공급 장치 문제. | 원격 배터리를 교체하십시오. Refer to power supply manual for remote pairing instructions. Check exit button wiring. Verify power supply is functioning. |
| Alarm beeper sounds continuously. | Door not fully closed or aligned. Sensor issue in magnetic lock. | Ensure door is fully closed and armature plate is in full contact with the magnetic lock. Inspect magnetic lock for damage. |
| Tuya App not connecting. | Wi-Fi 연결 문제. 앱 설정이 잘못되었습니다. System not in pairing mode. | Check Wi-Fi network and signal strength. Follow Tuya App instructions for device pairing. Ensure the power supply controller is in pairing mode (if applicable). |
9. 사양
| 특징 | 사양 |
|---|---|
| 자석 잠금 유지력 | 600파운드 |
| 전원 공급 입력 | 교류 100-240V |
| 전원 공급 장치 출력 | DC 12V / 3A |
| Lock Delay Timer | 0-15초(조정 가능) |
| 원격 제어 지원 | 최대 30개의 리모컨 |
| 앱 호환성 | 투야 앱 |
| 모델 번호 | 767637528856 |
| 품목 무게 | 6.96파운드(전체 키트) |
| 패키지 크기 | 11.97 x 9.61 x 3.11 인치 |
10. 보증 및 지원
YUHANUS products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official YUHANUS web해당 사이트입니다. 고객 지원팀에 문의하실 때는 모델 번호(767637528856)와 구매일자를 준비해 주시기 바랍니다.