1. 서론
Thank you for choosing the RAINPOINT Solar Automatic Irrigation System. This system is designed to provide efficient and automated watering for your plants in gardens, balconies, and greenhouses, utilizing solar power for sustainable operation. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.
Key features of the RAINPOINT Solar Automatic Irrigation System: 2000mAh battery, 30-day super standby, IP65 waterproof, 121 timer modes, and 45L/H flow rate.
2. 안전 정보
Please observe the following safety guidelines to prevent injury or damage to the device:
- Ensure all connections are secure before operating the system to prevent leaks.
- Do not submerge the main control unit in water. It is water-resistant, not submersible.
- 효율적인 충전을 위해 태양광 패널을 깨끗하게 유지하세요.
- 기기를 직접 분해하거나 수리하려고 하지 마세요. 도움이 필요하면 고객 지원에 문의하세요.
- Position the water source (bucket/reservoir) below or at the same level as the pump for optimal performance. The pump has a 3-meter lift height.
- Protect tubing from sharp objects or excessive tension to avoid damage.
3. 상자 안에 무엇이 들어있나요?
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
상세한 view of all included components for the RAINPOINT Solar Automatic Irrigation System.
- 1 x Solar Water Pump (with integrated solar panel)
- 1 x 그라운드 스테이크
- 1 x Main Tube (Ø4 mm x 15 m)
- 1 x Branch Tube (Ø3 mm x 5 m)
- 1 x 필터
- 3 x Tube End Caps
- 15 x Micro Drippers
- 15 x T-커넥터
- 1 x Cross Connector
- 1 x Anti-siphon Valve
- 2 x Screws (for wall mounting option)
- 케이블 타이 10 개
4. 설정 지침
- 물 공급원을 준비하세요: Place a water reservoir (e.g., a bucket or tank) in a suitable location. Ensure it is filled with water.
- Position the Solar Pump:
- Attach the ground stake to the solar pump unit.
- Insert the stake into the ground near your plants, ensuring the solar panel faces direct sunlight for maximum charging efficiency.
- Alternatively, use the provided screws to mount the pump unit on a wall or fence.
The solar panel charges the internal battery even on cloudy days, providing up to 30 days of standby power.
- Connect the Filter and Main Tube:
- Connect one end of the main tube (Ø4 mm) to the pump's water outlet.
- Attach the filter to the other end of the main tube and place the filter into your water reservoir. Ensure the filter is fully submerged.
- Install the Anti-siphon Valve:
Insert the anti-siphon valve into the main tube at a point higher than the water level in your reservoir. This prevents water from continuously siphoning out of the reservoir.
The anti-siphon valve prevents accidental over-watering and backflow.
- Distribute Tubing and Drippers:
- Lay out the main tube to reach your plants.
- Cut the main tube at desired points and insert T-connectors.
- Connect the branch tube (Ø3 mm) to the T-connectors and run it to individual plants.
- Insert a micro dripper into the end of each branch tube and place it near the base of the plant.
- Use the cross connector for parallel irrigation to ensure uniform distribution to up to 15 pots.
RAINPOINT's cross connector enables parallel irrigation for uniform water distribution to multiple plants.
- 튜빙 고정: Use the provided cable ties to secure the tubing and prevent kinks or dislodgement.
- Seal Unused Ends: Use the tube end caps to seal any unused branch tube ends.
5. 사용 설명서
The RAINPOINT system features dual knob control for easy programming.
The control unit with dual knobs for setting watering duration and frequency.
- 물주기 시간 설정:
사용하세요 "HOW LONG" knob to select the desired watering duration per cycle. Options range from 10 seconds to 20 minutes.
- 물주기 빈도 설정:
사용하세요 "HOW OFTEN" knob to select how frequently the system waters. Options range from every 8 hours to every 30 days.
- 수동 급수:
Press the central button for instant manual watering. The system will water for the duration set by the "HOW LONG" knob, then resume the programmed cycle.
- 121가지 타이머 모드:
The combination of duration and frequency settings provides 121 different watering options, allowing you to customize watering schedules for various plant types and environmental conditions.
Example watering schedules for indoor and outdoor plants, demonstrating the flexibility of the 121 timer configurations.
6. 유지관리
- 필터 청소: 물 필터가 막히는 것을 방지하고 원활한 물 흐름을 유지하려면 정기적으로 점검하고 청소하십시오.
- 모니터 수위: Ensure your water reservoir always has sufficient water. The system features an LED alarm that indicates low water levels.
- 깨끗한 태양광 패널: Wipe the solar panel periodically with a soft, damp cloth to remove dust and debris, ensuring optimal charging.
- Check Tubing and Drippers: Inspect all tubing and drippers for blockages, kinks, or damage. Clean drippers if they become clogged.
- 겨울 보관: In freezing conditions, drain all water from the system and store the pump and tubing indoors to prevent frost damage.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물의 흐름이 없습니다 |
|
|
| 불균일한 물 분배 |
|
|
| 시스템이 충전되지 않습니다 |
|
|
| Water siphoning continuously |
|
|
8. 사양
| 모델 번호 | ITP138-EU |
| 전원 | 태양 에너지 |
| 태양광 패널 | 1.5 W Monocrystalline Silicon |
| 배터리 | 2000 mAh Rechargeable Lithium-Ion |
| 대기 시간 | 최대 30일 |
| 유량 | 최대 45L/h |
| Pump Lift Height | 3 미터 |
| 물주기 시간 설정 | 10초 - 20분 |
| 물주기 빈도 설정 | 8 hours - 30 days |
| Max Number of Pots | 15 (with provided accessories) |
| Main Tube Length | 15 meters (Ø4 mm) |
| Branch Tube Length | 5 meters (Ø3 mm) |
| 재료 | 플라스틱, 고무 |
| 제품 치수 | 20.3 x 18 x 12cm |
| 제품 무게 | 970g |
9. 보증 및 지원
RAINPOINT products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your Solar Automatic Irrigation System, please contact RAINPOINT customer service through the retailer where you purchased the product or visit the official RAINPOINT web대지.
보증 청구를 위해 구매 증명서를 보관하십시오.
