소개
Thank you for choosing the KERDE P30B Smart Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet seat. Please read it thoroughly before use and retain it for future reference.
중요한 안전 정보
안전한 작동을 보장하고 손상을 방지하려면 다음 예방 조치를 준수하세요.
- The product must be connected to a domestic water supply.
- The electrical connection requires 120V voltage and a 3-hole grounded socket.
- 제품을 물에 담그거나 전기 부품에 직접 물을 뿌리지 마십시오.
- 누수를 방지하기 위해 모든 수도 연결부가 단단히 고정되어 있는지 확인하십시오.
- 어린이 및 신체적, 감각적 또는 정신적 능력이 저하된 사람들은 안전한 사용 방법에 대해 감독받거나 교육을 받아야 합니다.
- 청소나 유지관리 작업을 하기 전에는 반드시 장치의 플러그를 뽑으세요.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- KERDE P30B Bidet Toilet Seat
- 무선 원격 제어
- 장착 하드웨어
- 급수 호스
- 사용자 설명서
제품 특징
The KERDE P30B Smart Bidet Toilet Seat offers a range of features designed for comfort and hygiene:
듀얼 컨트롤 옵션
Operate your bidet seat with ultimate convenience using either the full-function side panel or the wireless remote control. Both provide access to all features.
The KERDE P30B Smart Bidet Toilet Seat, showcasing its sleek design and dual control options: a wireless remote and an integrated side panel.
A close-up of the dual control system, featuring both the comprehensive wireless remote and the intuitive side panel, detailing all available functions and settings.
Warm Water Wash & Adjustable Nozzle
Experience a refreshing clean with warm water wash, offering adjustable temperature and pressure settings. The self-cleaning stainless steel nozzle ensures maximum hygiene with front and rear wash modes, suitable for all users.
This diagram details the various wash modes available, including rear, female, and oscillating options, along with the adjustable nozzle position and self-cleaning feature for enhanced hygiene.
Heated Seat & Warm Air Drying
Stay comfortable year-round with the heated seat feature, offering multiple temperature levels. After cleansing, the warm air dryer provides a hands-free drying experience, reducing the need for toilet paper.
오버view of the smart features, highlighting the warm air dryer, heated seat, and self-cleaning nozzle, all designed for comfort and cleanliness.
LED 야간 조명
The soft LED night light ensures safe and convenient nighttime use. Its gentle illumination guides you without disrupting sleep.
Energy-Saving & Quiet Close Design
Built with energy-saving technology, this toilet seat minimizes power consumption. The quiet close lid prevents slamming noises, adding a touch of elegance to your bathroom.
설치 가이드
Follow these steps to install your KERDE P30B Bidet Toilet Seat. It is recommended to watch the provided installation videos for visual guidance.
1. Confirm Toilet Size
Before installation, ensure your toilet dimensions are compatible with the bidet seat. Refer to the diagram below for required measurements.
Important measurements for ensuring compatibility with your existing toilet, illustrating the required length and width for proper fitment.
2. 설치 준비
- Shut off the water supply to your toilet at the wall valve.
- 변기를 내려서 탱크를 비우세요.
- 변기 물탱크에서 기존 물 공급 호스를 분리합니다.
- Remove your old toilet seat and lid.
3. Mount the Bidet Seat
- Place the mounting plate over the toilet bowl holes.
- Insert the rubber expansion bolts into the holes and secure them with the provided screws.
- 비데 시트를 장착판에 딸깍 소리가 나면서 제자리에 고정될 때까지 밀어 넣으세요.
4. 물 공급 연결
- Install the T-valve (water splitter) between the toilet tank fill valve and the water supply hose. Ensure the rubber washer is correctly seated to prevent leaks.
- Connect one end of the bidet water supply hose to the T-valve and the other end to the bidet seat's water inlet. Ensure a tight connection.
- Slowly open the water supply valve to check for leaks.
5. 전원 연결
- Plug the bidet seat's power cord into a grounded 120V electrical outlet.
설치 비디오
This video provides a step-by-step guide on how to install the KERDE P30B Electric Bidet Toilet Seat, covering water connection and mounting.
An instructional video highlighting the key features and demonstrating the basic operational functions of the KERDE P30B Electric Bidet Toilet Seat.
운영 가이드
The KERDE P30B bidet seat can be operated using either the integrated side panel or the wireless remote control. Ensure you are seated on the bidet seat for functions to activate, as it features a seat sensor.
기본 기능
- 힘: 전원 버튼을 눌러 장치를 켜거나 끕니다.
- 후면 세척: Activates the rear cleansing function.
- 여성용 세척제: Activates the gentle front cleansing function.
- 건조: Initiates the warm air drying cycle.
- 중지: Stops any active function.
조정 가능한 설정
- 물의 온도: Adjust the water temperature (Low, Medium, High) for washing.
- 좌석 온도: Adjust the heated seat temperature (Low, Medium, High) for comfort.
- 수압: Increase or decrease the water spray intensity.
- 노즐 위치: Adjust the nozzle forward or backward for optimal cleansing.
- Oscillate Wash: Some wash modes may offer an oscillating feature for broader cleaning.
추가 기능
- LED 야간 조명: 야간 사용을 위한 은은한 조명을 제공합니다.
- 에너지 절약: 전력 소비를 줄이기 위해 에너지 절약 모드를 활성화합니다.
- 자체 세척 노즐: 노즐은 사용 전후에 자동으로 세척됩니다.
- 자동 기능: Cycles through a preset sequence of wash and dry functions.
관리 및 유지 보수
정기적인 청소 및 관리는 비데 시트의 수명과 최적의 성능을 보장합니다.
비데 좌석 청소
- Unplug the bidet seat from the power outlet before cleaning.
- 부드러운 d를 사용하세요amp 천과 순하고 마모성이 없는 세제를 사용하여 외부 표면을 닦아주세요.
- Do not use harsh chemicals, abrasive pads, or benzene-based cleaners, as these can damage the surface.
- For the nozzle, the self-cleaning function is usually sufficient. If manual cleaning is needed, gently pull out the nozzle and wipe it with a soft cloth.
장기 보관
- If the bidet seat will not be used for an extended period, drain the water from the unit and disconnect the power.
- 건조하고 온화한 곳에 보관하십시오.
문제 해결
If you encounter issues with your KERDE P30B bidet seat, refer to the following common problems and solutions:
- 전원 없음: Check if the power cord is securely plugged into a grounded outlet. Ensure the outlet is functional.
- 물 스프레이 없음: Verify that the water supply valve is fully open and that the T-valve is correctly installed. Ensure the seat sensor is activated by sitting on the seat.
- 물 온도가 변하지 않음: Allow a few moments for the water heater to adjust. Ensure the water temperature setting is correctly selected.
- 좌석 열선 기능 불량: Confirm the seat temperature setting is active. Ensure the seat sensor is engaged.
- 리모콘이 응답하지 않음: Check the remote control batteries. Ensure there are no obstructions between the remote and the bidet seat.
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
기술 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 케르데 |
| 모델 번호 | US-08B |
| 색상 | 하얀색 |
| 재료 | 플라스틱 |
| 스타일 | 미니멀리스트 |
| 모양 | 타원형 |
| 제품 치수 | 20인치 길이 x 17인치 너비 |
| 품목 무게 | 10.83파운드(4.92킬로그램) |
| 전력 요구 사항 | 120V (requires 3-hole socket) |
보증 및 고객 지원
For warranty information, specific terms and conditions, or to contact customer support, please refer to the official documentation included with your product or visit the KERDE web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.
