1. 서론
This instruction manual provides essential information for the proper installation, operation, and maintenance of your AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speaker. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product. Retain this manual for future reference.
2. 제품 오버view
2.1 특징
- Compact 2-inch full-range design for versatile audio applications.
- Rated at 5W power output with 8 Ohm impedance.
- Designed for easy installation with appropriate accessories.
- 견고한 구조로 안정적인 성능을 보장합니다.
2.2 패키지 내용
- 2 x AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers

그림 1: 전면 및 후면 view of the AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers.
3. 사양
| 매개변수 | 값 |
|---|---|
| 스피커 유형 | Full Range Mini Woofer |
| 지름 | 52의 mm (2 인치) |
| 키 | 30mm (XNUMXmm) |
| 임피던스 | 8옴 |
| 정격 전력 | 5와트 |
| Screw Hole Diagonal Dimension | 60mm (XNUMXmm) |
| 자석 직경 | 45mm (XNUMXmm) |
| 제품 중량 (개당) | Approx. 25 g (Total 50 g for 2 speakers) |
| 장착 유형 | 플러시 마운트 |

Figure 2: Detailed dimensions of the speaker for installation planning.
4. 설정 및 설치
Follow these steps for proper installation of your speakers:
- 준비: 오디오를 보장하세요 amplifier or source is turned off and disconnected from power before beginning installation. Gather necessary tools such as a screwdriver, wire strippers, and mounting hardware (not included unless specified).
- 장착 위치: Choose a suitable location for mounting the speakers. Refer to Figure 2 for speaker dimensions to ensure proper fit. The speakers are designed for flush mounting.
- 배선:
- Identify the positive (+) and negative (-) terminals on the back of each speaker. These are typically marked.
- 스피커의 양극(+) 단자를 전원 콘센트의 양극(+) 출력 단자에 연결하세요. amp리퍼.
- 스피커의 음극(-) 단자를 전원 콘센트의 음극(-) 출력 단자에 연결하십시오. amp리퍼.
- 모든 연결이 안전하고 단락이 없는지 확인하세요.
- 스피커 보안: Use appropriate screws (not included) to secure the speakers into their mounting holes. The screw hole diagonal dimension is 60 mm. Do not overtighten screws, as this may damage the speaker frame.
- 최종 확인: Double-check all connections and mounting security before proceeding to operation.

그림 3: 후면 view of the speaker showing wiring terminals.
5. 사용 설명서
Once the speakers are properly installed and wired:
- Connect your audio amplifier or source to power.
- 켜세요 amplifier 및 오디오 소스.
- 낮은 볼륨 레벨로 오디오 재생을 시작합니다.
- Gradually increase the volume to your desired listening level. Avoid excessively high volumes that may cause distortion or damage to the speakers.
6. 유지관리
스피커의 수명 연장과 최적의 성능을 보장하려면 다음 유지 관리 지침을 따르십시오.
- 청소: Gently wipe the speaker cones and frames with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- 환경: Avoid exposing the speakers to extreme temperatures, direct sunlight, high humidity, or moisture.
- 물리적 손상: Protect the speaker cones from punctures or tears. Avoid placing heavy objects on the speakers.
- 배선: Periodically check wiring connections for looseness or corrosion. Re-secure or clean as necessary.
7. 문제 해결
스피커에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 |
|
|
| 왜곡되거나 불분명한 소리 |
|
|
| 스피커가 하나만 작동합니다 |
|
|
8. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Specific warranty terms may vary by region and seller.





