1. 서론
The Nitecore EDC29 LUMINBLADE is an ultra-slim, high-performance rechargeable flashlight designed for everyday carry. It features a dual LED system with 18 cores, delivering up to 6,500 lumens of brightness and a beam distance of 400 meters. This manual provides essential information for the safe and effective use of your EDC29 flashlight, including setup, operation, maintenance, and specifications.
Image 1.1: Nitecore EDC29 LUMINBLADE flashlight with included accessories.
Image 1.2: The Nitecore EDC29 LUMINBLADE, highlighting its 6500 lumen output.
2. 설정
2.1 언박싱 및 패키지 구성품
패키지를 열면 모든 구성품이 들어 있는지 확인하세요.
- Nitecore EDC29 LUMINBLADE Flashlight
- USB Type-C 충전 케이블
- USB 벽면 어댑터
- Lanyard (if included in your specific package)
2.2 초기 충전
The EDC29 features a built-in 2,500mAh Li-ion battery. Before first use, it is recommended to fully charge the device.
- Connect the USB Type-C charging cable to the flashlight's USB-C port.
- Connect the other end of the cable to the provided USB wall adapter or any compatible USB power source.
- The OLED display will indicate charging status. Charging is complete when the display shows a full battery icon or indicates 'Full'.
The flashlight can be used during charging, but performance may be limited.
3. 사용 설명서
The EDC29 utilizes dual two-stage tail switches for intuitive control.
3.1 전원 켜기/끄기
- 켜려면: Press and hold the power button (typically the larger, primary tail switch) until the light activates.
- 끄기: Press and hold the power button again until the light deactivates.
3.2 밝기 수준 및 모드
The EDC29 offers four brightness levels and specialized modes: LUMIN SHIELD, STROBE READY, and SEARCH Mode.
이미지 3.1: 이상view of the EDC29's lighting control features.
- Cycling Brightness: With the light on, short press the mode button (secondary tail switch) to cycle through the four available brightness levels.
- LUMIN SHIELD (6500 Lumens): This mode provides a wide-area, high-intensity light. It can be accessed via a customizable button press (see 3.3).
- STROBE READY: This mode features randomly changing frequencies (16 Hz to 20 Hz) for disorienting effects. It can be accessed via a customizable button press (see 3.3).
- SEARCH Mode (3000 Lumens, 400 Meters): This tactical mode activates the two primary LED cores for a focused, long-range beam. It can be accessed via a customizable button press (see 3.3).
Image 3.2: The STROBE READY mode with randomly changing frequencies.
Image 3.3: The Tactical SEARCH Mode providing a 400-meter beam.
3.3 Customizable Button Access
The EDC29 allows users to tailor functions to their needs:
- 하프 프레스: Can be configured for instant access to SEARCH mode.
- 전체 보도: Can be configured for instant access to LUMIN SHIELD or STROBE mode.
Refer to the specific button configuration instructions in the full product manual for detailed customization steps.
3.4 Rapid Lock (Lockout Switch)
The Rapid Lock feature prevents accidental activation. It offers two modes:
- 세미 잠금 모드: Allows access to certain functions while preventing full activation.
- 완전 잠금 모드: Completely disables all functions to prevent any accidental activation during transport or storage.
Slide the lockout switch to engage or disengage these modes. A simple slide allows for quick locking or unlocking.
3.5 OLED 디스플레이
The integrated OLED display provides real-time information, including:
- 밝기 레벨
- 배터리 용량tage
- 남은 전력
- 실행 시간
3.6 고급 온도 조절(ATR)
The EDC29 incorporates an ATR module that adjusts output based on the flashlight's internal temperature, preventing overheating and prolonging LED lifespan.
4. 유지관리
4.1 청소
- 깨끗하고 부드러운 천으로 손전등 본체를 닦으세요.
- 완고한 먼지의 경우 약간 damp 천을 사용할 수 있습니다. 강한 화학 물질이나 연마재는 피하세요.
- USB-C 포트를 깨끗하게 유지하고 이물질이 끼지 않도록 하십시오.
4.2 배터리 관리
The built-in Li-ion battery requires proper care for optimal performance and longevity:
- 배터리를 자주 완전히 방전시키지 마세요.
- Charge the flashlight regularly, even if not in frequent use, to maintain battery health.
- 사용하지 않을 때는 손전등을 서늘하고 건조한 곳에 보관하십시오.
4.3 방수 및 방진
The EDC29 has an IP54 rating, meaning it is protected against dust ingress and splashing water from any direction. While it can withstand light rain or splashes, it is not designed for submersion in water.
5. 문제 해결
If you encounter issues with your EDC29 flashlight, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 손전등이 켜지지 않습니다. | Low battery, Lockout Mode engaged, or faulty switch. | Charge the battery. Disengage the Rapid Lock switch. Ensure buttons are pressed correctly. |
| 빛이 어둡거나 깜빡입니다. | Low battery, or ATR system adjusting output due to heat. | Recharge the battery. Allow the flashlight to cool down if it has been operating at high output for an extended period. |
| 손전등이 충전되지 않습니다. | Faulty cable/adapter, dirty USB-C port, or battery issue. | Try a different USB-C cable and adapter. Clean the USB-C port. If the issue persists, contact support. |
| OLED 디스플레이가 작동하지 않습니다. | Software glitch or hardware malfunction. | 배터리가 충전되어 있는지 확인하세요. 문제가 지속되면 지원팀에 문의하세요. |
If these solutions do not resolve the issue, please contact Nitecore customer support or your retailer for further assistance.
6. 사양
The following table outlines the key technical specifications for the Nitecore EDC29 LUMINBLADE flashlight:
Image 6.1: Key features and components of the EDC29 LUMINBLADE.
| 특징 | 세부 사항 |
|---|---|
| 최대 출력 | 6,500루멘 |
| 최대 빔 거리 | 400 미터 |
| 최대 빔 강도 | 35,360 cd (40,230 cd in SEARCH mode) |
| 최대 런타임 | 61시간 |
| 주도의 | 2 x UHi 20 MAX LEDs |
| 배터리 | 내장형 2,500mAh 리튬이온 배터리 |
| 충전 포트 | USB-C |
| 길이 | 133.5mm / 5.26인치 |
| 너비 | 34.6mm / 1.36인치 |
| 무게 | 160g / 5.64온스 |
| 방수성 | IP54 |
| 충격 저항성 | 1 미터 |
| 재료 | Stainless steel shells with carbon fiber composite frame |
| 특별 기능 | OLED Display, Rapid Lock, ATR Module, Level Preset Function |
7. 보증 및 지원
Specific warranty terms and direct customer support contact information are not provided within this manual. For detailed warranty information, please refer to the warranty card included with your product, visit the official Nitecore website, or contact your point of purchase. For technical support or service inquiries, please reach out to the authorized Nitecore distributor or retailer from whom you purchased the product.