1. 소개 및 이상view
Thank you for choosing the TOOLCY Gas Powered Pressure Washer. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new pressure washer. Designed for tough cleaning jobs, this unit delivers impressive power and efficiency for various outdoor tasks.
This gas-powered pressure washer is engineered to provide professional-level cleaning performance, making it ideal for driveways, siding, patios, decks, fences, vehicles, and more. Its robust design ensures durability and ease of use.
2. 안전 정보
경고: 본 제품을 작동하기 전에 모든 안전 경고 및 지침을 읽고 이해하십시오. 경고 및 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.
- Always wear appropriate personal protective equipment, including eye protection, hearing protection, and sturdy footwear.
- 분무기를 사람, 애완동물 또는 전자 기기에 직접 조준하지 마십시오. 고압 분사로 심각한 부상을 입을 수 있습니다.
- 일산화탄소 중독을 예방하기 위해 환기가 잘 되는 곳에서 고압 세척기를 작동하십시오.
- Ensure all connections are secure before starting the unit to prevent leaks.
- Do not operate the pressure washer if any parts are damaged or missing.
- 어린이와 애완동물을 수술 구역에 접근하지 못하게 하세요.
- 참고사항: All pressure washers are tested before shipment, so there may be minimal residual fuel or oil odor. To avoid the risk of leaks and potential oil damage during shipping, we do NOT include engine oil (recommended type: 10W-30). You can choose any compatible oil brand without worrying about cross-contamination. An oil funnel is provided to assist with easy oil topping during maintenance.
3. 패키지 내용
포장을 풀 때 모든 품목이 들어 있고 상태가 양호한지 확인하세요.
- TOOLCY Gas Powered Pressure Washer Unit
- 35-foot High-Pressure Hose
- Ergonomic Spray Gun with Swivel Connector
- High-Quality Metal Extension Wand
- 5가지 종류의 퀵 커넥트 노즐 팁 (0°, 15°, 25°, 40°, 비누용)
- 오일 깔때기
Figure 3.1: The TOOLCY Gas Powered Pressure Washer shown with its complete set of accessories, including the 35-foot high-pressure hose, spray gun, extension wand, and five quick-connect nozzles.
4. 설정
Follow these steps to assemble and prepare your pressure washer for first use:
- 언박싱 및 초기 조립: Carefully remove the pressure washer and all components from the packaging. The unit is largely pre-assembled.
- 손잡이 부착: Secure the handle to the main unit using the provided quick-connect fasteners. No tools are typically required for this step.
- Attach the Spray Gun Holder and Hose Rack: Install the brackets for the spray gun and high-pressure hose onto the handle. These usually attach with thumb screws.
- 엔진 오일 추가: Locate the oil fill cap on the engine. Using the provided oil funnel, add 10W-30 engine oil (not included) until it reaches the appropriate level on the dipstick. Do not overfill.
- 가솔린 추가: Fill the fuel tank with fresh, unleaded gasoline. Ensure the fuel cap is securely tightened.
- 고압 호스 연결: Connect one end of the 35-foot high-pressure hose to the pressure washer's high-pressure outlet and the other end to the spray gun. Ensure connections are tight.
- 정원 호스 연결: Attach your garden hose to the water inlet on the pressure washer. Ensure the connection is secure and free of leaks. Turn on the water supply fully.
Video 4.1: This video demonstrates the unboxing and initial setup process of the TOOLCY Gas Powered Pressure Washer, including attaching the handle, hose, and adding fluids. It also shows the easy recoil start.
Figure 4.1: The main unit of the TOOLCY Gas Powered Pressure Washer, showcasing its robust frame and large 12-inch wheels for easy maneuverability.
그림 4.2: 클로즈업 view of the 209CC 4-Stroke OHV Engine, highlighting its design for stronger power, lower noise, and higher fuel efficiency.
Figure 4.3: The durable 12-inch never-flat wheels, designed to handle various road conditions and provide smooth navigation over uneven surfaces.
5. 사용 설명서
시작하기 전에 장치가 평평한 곳에 놓여 있는지, 급수 밸브가 완전히 열려 있는지 확인하십시오.
- 엔진 시작: Engage the choke (if applicable) and set the engine switch to the 'ON' position. Pull the recoil start handle firmly until the engine starts. Once started, gradually disengage the choke.
- 노즐 선택하기: Choose the appropriate quick-connect nozzle tip for your cleaning task. Push the nozzle firmly into the spray gun's quick-connect collar until it clicks into place.
- 0° (빨간색): For toughest stains and concentrated cleaning. Use with extreme caution.
- 15° (노란색): For heavy-duty cleaning on hard surfaces.
- 25° (녹색): For general washing tasks.
- 40° (흰색): For delicate surfaces and light rinsing.
- 비누(검정색): 세제를 바르는 데 사용합니다.
- 세제 적용: Fill the 0.88-gallon on-board soap tank with pressure washer-safe detergent. Attach the black soap nozzle. The pressure washer will automatically mix the detergent with the water at a lower pressure.
- 청소 기술: Hold the spray gun firmly with both hands. Start spraying a few feet away from the surface and gradually move closer until the desired cleaning effect is achieved. Use sweeping motions to ensure even cleaning.
- 종료: Release the spray gun trigger. Turn off the engine. Turn off the water supply. Squeeze the spray gun trigger to release any remaining pressure in the system. Disconnect the hoses.
Figure 5.1: The TOOLCY Gas Powered Pressure Washer in action, demonstrating its powerful 3200 PSI and 2.6 GPM output for effective cleaning.
Figure 5.2: The 360-degree swivel inlet on the spray gun, designed to prevent hose kinks and improve efficiency during operation.
Figure 5.3: The 35-foot high-pressure hose, providing extended reach for cleaning larger areas without needing to move the unit frequently.
Figure 5.4: The 0.88-gallon on-board soap tank, allowing for consistent detergent application for deeper and more effective cleaning.
Figure 5.5: A visual comparison showing the effective cleaning power of the pressure washer on a dirty concrete surface, with a clear difference between the uncleaned and cleaned areas.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your TOOLCY pressure washer.
- 엔진 오일: Check the engine oil level before each use. Add 10W-30 oil as needed. Change the oil after the first 5 hours of use, then every 50 hours or annually, whichever comes first.
- 에어 필터: Regularly inspect and clean the air filter. A dirty air filter can reduce engine performance. Refer to the engine manual for specific cleaning instructions.
- 점화 플러그: 점화 플러그는 매년 또는 100시간 사용마다 점검하십시오. 필요에 따라 청소하거나 교체하십시오.
- 연료 시스템: 장기간 보관할 경우 연료 탱크와 기화기의 연료를 비우거나 연료 안정제를 사용하여 연료 열화를 방지하세요.
- 펌프: The axial-cam pump is designed to be maintenance-free. However, always ensure a consistent water supply during operation to prevent damage.
- 노즐: Clean clogged nozzles using the provided nozzle cleaning tool or a thin wire.
- 저장: Store the pressure washer in a clean, dry, and frost-free area. Disconnect all hoses and drain any remaining water from the pump and hoses to prevent freezing damage.
7. 문제 해결
If you encounter issues with your pressure washer, consult the following table for common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 엔진이 시동되지 않습니다 | 연료가 없거나 연료 수준이 낮습니다 엔진 스위치 OFF Choke not engaged/disengaged properly 오일 레벨이 낮음 | 신선한 연료를 추가하십시오 엔진 스위치를 ON으로 돌리십시오. 필요에 따라 초크를 조절하십시오. 엔진오일을 적정 수준까지 보충하세요. |
| 저압 출력 | 막힌 노즐 물 공급이 부족합니다 펌프에 공기가 들어 있음 마모된 펌프 씰 | 노즐 청소 또는 교체 Ensure water supply is fully open and hose is not kinked Run unit with spray gun open until steady stream 고객 지원에 문의하세요 |
| 엔진이 거칠게 돌아요 | 오래된 연료 더러운 공기 필터 더러운 점화 플러그 | 연료를 비우고 새 연료로 다시 채우세요 에어 필터를 청소하거나 교체하세요 점화 플러그 청소 또는 교체 |
| 펌프에서 누수 | 느슨한 피팅 손상된 O링/씰 | 모든 연결을 조입니다 Inspect and replace O-rings/seals if necessary |
8. 사양
| 특징 | 사양 |
|---|---|
| 상표 | TOOLCY |
| 모델 번호 | RM |
| 전원 | 가스 동력 |
| 최대 압력 | 3200 평방 인치당 파운드(PSI) |
| 최대 유량 | 분당 2.6갤런(GPM) |
| 호스 길이 | 35 피트 |
| 지팡이 길이 | 21 인치 |
| 탱크 용량(비누) | 0.9갤런 |
| 제품 치수 | 18인치 길이 x 16인치 너비 x 16인치 높이 |
| 품목 무게 | 65.9파운드 |
| 사양 충족 | 환경보호청 |
9. 보증 및 지원
For any questions, technical assistance, or warranty claims, please contact TOOLCY Customer Support. Refer to your purchase documentation for specific warranty terms and conditions.
You can also visit the official TOOLCY store for more information and support: TOOLCY Store
