1. 서론
The HGLRC M100 Pro GPS module with QMC5883L Compass is a high-performance navigation unit designed for FPV (First-Person View), fixed-wing aircraft, and various Unmanned Aerial Vehicle (UAV) applications. It incorporates an upgraded 10th generation chip and a QMC5883L compass to provide accurate and reliable positioning data. This manual provides essential information for the proper setup, operation, and maintenance of your M100 Pro GPS module.

The HGLRC M100 Pro GPS module, a compact unit for precise navigation.
2. 주요 특징
- 10th Generation Chip: Utilizes an advanced B101 chip for enhanced performance and faster satellite acquisition.
- QMC5883L Compass: Integrated compass for accurate heading information.
- Expanded Receiving Channel: Supports 120 channels for improved satellite signal reception.
- Fast Satellite Lock: Achieves quick satellite fixes, often locking onto over 50 satellites.
- 컴팩트한 디자인: Small and lightweight, suitable for various drone builds.

Illustration highlighting the advanced 10th generation B101 chip for powerful performance.

An FPV screen capture demonstrating the module's ability to lock onto over 50 satellites for enhanced accuracy.
3. 설정 및 설치
3.1 배선도
Connect the HGLRC M100 Pro GPS module to your flight controller using the provided cable. Ensure correct pin alignment for GND, 5V, RX, TX, SCL, and SDA. Refer to the diagram below for detailed connections.

Detailed wiring diagram showing connections between the M100 Pro GPS module and a flight controller, indicating GND, 5V, RX, TX, SCL, and SDA pins.
3.2 장착
GPS 모듈을 시야가 확보된 곳에 장착하십시오. view of the sky, away from potential sources of electromagnetic interference such as video transmitters (VTX) or receiver antennas. This helps ensure optimal satellite signal reception and compass accuracy.
3.3 초기 구성
After physical installation, connect your flight controller to its configuration software (e.g., Betaflight, iNav). You will need to:
- Enable GPS and select the correct UART port.
- Configure the GPS protocol (typically UBLOX or NMEA).
- Enable the magnetometer (compass) and select the correct I2C address and orientation. Calibration of the compass is crucial for accurate heading.
4. 사용 설명서
4.1 GPS Fix Acquisition
Upon powering on your aircraft, the GPS module will begin searching for satellites. A 'fix' is achieved when enough satellites are locked to provide accurate position data. This module is designed for fast acquisition, often achieving a lock within minutes under clear sky conditions.
4.2 LED 표시등
The HGLRC M100 Pro GPS module features onboard LED indicators to communicate its status:

Table explaining the behavior of the PPS (blue) and Power (red) LED indicators for normal operation and position accuracy.
- Power (Red LED): Indicates the module is receiving power. It should be continuously bright.
- PPS (Blue LED): Indicates GPS position accuracy. It will flicker when a real position fix is achieved.
5. 유지관리
To ensure the longevity and optimal performance of your HGLRC M100 Pro GPS module:
- 모듈을 깨끗하게 유지하고 먼지와 이물질이 없도록 하십시오.
- 모듈을 극심한 온도나 습기에 노출시키지 마십시오.
- Regularly check wiring connections for secure fit and any signs of damage.
- Ensure the module is securely mounted to prevent vibrations from affecting performance.
6. 문제 해결
- Slow GPS Fix / No Fix:
- 모듈에 장애물이 없고 시야가 확보되어 있는지 확인하십시오. view 하늘의.
- Verify that the module is mounted away from other electronic components that may cause interference (e.g., VTX, high-current wires).
- Check wiring connections for continuity and correct pin assignment.
- Confirm flight controller software settings for GPS are correct.
- 나침반 판독값 오류:
- Perform a compass calibration in your flight controller software.
- Ensure the module is mounted as far as possible from power wires, motors, and ESCs to minimize magnetic interference.
- Verify the compass orientation setting in the flight controller software matches the physical orientation of the module.
- 커넥터 문제:
- Handle connectors with care during installation and removal to prevent damage.
- Ensure the connector is fully seated and locked into place.
7. 사양

Detailed technical specifications for the M100 Pro GPS module, including chip type, antenna, frequency, and dimensions.
| 특징 | 세부 사항 |
|---|---|
| 칩 | B101 (10th generation chip) |
| 안테나 | 세라믹 안테나 |
| 빈도 | GPS L1, GLONASS G1, BDS B1, GALILEO E1, QZSS L1, IRNSS |
| 전송 속도 | 115200 |
| 출력 주파수 | 10Hz |
| 전원 입력 | 3.3-5.5V |
| 크기 | 21.2 x 21.2 x 8.2mm |
| 무게 | 7.9g(0.317온스) |
| 색상 | 검은색 |
| 제조업체 | HGLRC |
| 품목 모델 번호 | M100 Pro GPS |

Physical dimensions and weight comparison of the HGLRC M100 Pro GPS module.
8. 보증 및 지원
8.1 보증 정보
This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. Specific warranty terms and duration may vary by region and retailer. For detailed warranty information, please refer to the official HGLRC web사이트를 방문하거나 구매처에 문의하세요.
8.2 기술 지원
For technical assistance, troubleshooting, or any questions regarding the HGLRC M100 Pro GPS module, please contact HGLRC customer support. We are the original HGLRC manufacturer and are committed to assisting you within 24 hours. You can find contact information on the official HGLRC web사이트나 소매업체를 통해 구매하세요.





